Wire

60 found, showing page 1 of 3

10AWG Silicone Wire 3', Black

$7.99ITEM: DYN8861

Specifications:
Nominal voltage: 600V
Testing voltage: 2000V
Temperature Range: -60° c to +200°c
Conduct: Tinned copper
Insulator: silicone
Conductor construction: 680/0.08mm
Over Diameter: 4.5mm
3 Feet/ 36″

8AWG Silicone Wire 3', Red

$8.99ITEM: DYN8865

8AWG Silicone Wire 3', Red

8AWG Silicone Wire 3', Black

$8.99ITEM: DYN8866

8AWG Silicone Wire 3', Black

8AWG Silicone Wire 3', Blue

$8.99ITEM: DYN8867

8AWG Silicone Wire 3', Blue

3-Conductor 22AWG Wire J

$5.49ITEM: EMOM0146

3-Conductor 22AWG Wire J

59411 Servo Wire 50' 3 Color

$0.49ITEM: HRCM3001

59411 Servo Wire 50' 3 Color

Hvy Gauge Twisted Wire Ai

$7.49ITEM: HRCM4609

Hvy Gauge Twisted Wire Ai

Hvy Gauge Twisted Wire Ai

$7.99ITEM: HRCM4610

Hvy Gauge Twisted Wire Ai

Hvy Gauge Twisted Wire Ai

$10.49ITEM: HRCM4611

Hvy Gauge Twisted Wire Ai

6 Hvy Gge Twisted Wire Y

$11.99ITEM: HRCM4612

6 Hvy Gge Twisted Wire Y

6 Hvy Gge Twisted Wire Y

$11.99ITEM: HRCM4703

6 Hvy Gge Twisted Wire Y

Titanium Rustler Vxl Hinge Pin

$19.99ITEM: LNSC3725

TITANIUM RUSTLER VXL HINGE PIN

5500 14 Gauge Silicone Wire 3'

$11.99ITEM: NOVC5500

5500 14 Gauge Silicone Wire 3'

TRA023 Stainless Steel Screw Kit

$29.99ITEM: RCZC0723

TRA023 Stainless Steel Screw Kit

RPM Low Visibility Wheelie Bars X-Maxx

$14.95ITEM: RPMC1582

This is the RPM Low Visibility Wheelie Bar for the Traxxas X-Maxx.

**Must be used with the RPM #81762 Rear Bumper Mount**
**Will not work with stock, or any other known aftermarket rear bumper mounts**

FEATURES

Protects the low hanging rear bumper of the X-Maxx
Touches down before the rear bumper in 99% of normal acceleration
wheelies
Molded from engineering grade nylon

INCLUDES

Two Wheels with Mounting Bracket and Hardware
Instruction Sheet

REQUIREMENTS

RPM #81762 Rear Bumper Mount, RPMC1762

SPECIFICATIONS

Wheel Diameter: 1.5" (38mm)

X-maxx Inner Bearings

$11.49ITEM: RPMC1670

X-MAXX INNER BEARINGS

RPM Oversized Rear Axle Carriers X-Maxx

$20.99ITEM: RPMC1732

This is a pair of RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx.

FEATURES

Molded nylon construction, black in color
Accomodates larger inner bearings (included) than stock for greater
strength and load ratings

INCLUDES

Left and Right Rear Axle Carriers
Two 20x32x7mm Inner Ball Bearings

REQUIREMENTS

Two 15x24x5mm Outer Ball Bearings, TRAC5105, or TRAC5106

RPM Rear Bumper Mounts X-Maxx

$10.95ITEM: RPMC1762

This is the Rear Bumper Mount for the Traxxas X-Maxx.

FEATURES

Replaces stock Traxxas #7734 Rear Bumper Support
Four small attachment points for the RPM #81582 Low Visibility
Wheelie Bars (not included)
Molded from engineering grade nylon, black in color

RPM Upper/Lower A-Arm Black X-Maxx

$27.95ITEM: RPMC2352

This is a pair of optional RPM Upper and Lower A-Arms for the Traxxas X-Maxx.

FEATURES

Molded from engineering grade nylon
Stronger and lighter than stock A-Arms
Replaces the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
#7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
support beam to spread impact energy over a larger area

INCLUDES

One each Upper and Lower A-Arm

COMMENTS

Four packages are required to complete one vehicle

RPM ESC Cage for Mamba Monster X/Mamba Monster 2

$9.95ITEM: RPMC3622

This is the RPM ESC Cage for the Traxxas E-Maxx, E-Revo and Summit.

Blk Front Bulkhead Rpm

$11.95ITEM: RPMC3752

BLK FRONT BULKHEAD RPM

RPM Front Bulkhead Green 1/10 Traxxas 2WD

$11.95ITEM: RPMC3754

This is the RPM Front Bulkhead for 1/10 scale 2WD Traxxas Vehicles.
**Not compatible with any 4x4 version of the vehicles listed below.**

FEATURES

Replaces the Traxxas #2530 and 2530A front bulkheads
Fits the Traxxas Slash 2wd, Nitro Slash, Bandit, electric Rustler,
Nitro Rustler, nitro Stampede & electric Stampede 2wd (including
the Skully and Craniac)
More that 15% lighter than stock front bulkhead
Molded from a blend of engineering grade nylons, green in color
Dust plate covers bottom of bulkhead on vehicles such as the
Rustler, Stampede and Bandit that leave the bottom exposed

INCLUDES

Front Bulkhead with Dust Plate and Instructions

Blue Front Bulkhead Rpm

$11.95ITEM: RPMC3755

The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.

RPM also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. The RPM version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. RPM also included a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.

Each RPM Front Bulkhead is built from RPM's bulletproof blend of engineering grade nylons, made right here in the USA and comes with their limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!

RPM Front Bulkhead Red 1/10 Traxxas 2WD

$11.95ITEM: RPMC3759

This is the RPM Front Bulkhead for 1/10 scale 2WD Traxxas Vehicles.
**Not compatible with any 4x4 version of the vehicles listed below.**

FEATURES

Replaces the Traxxas #2530 and 2530A front bulkheads
Fits the Traxxas Slash 2wd, Nitro Slash, Bandit, electric Rustler,
Nitro Rustler, nitro Stampede & electric Stampede 2wd (including
the Skully and Craniac)
More that 15% lighter than stock front bulkhead
Molded from a blend of engineering grade nylons, red in color
Dust plate covers bottom of bulkhead on vehicles such as the
Rustler, Stampede and Bandit that leave the bottom exposed

INCLUDES

Front Bulkhead with Dust Plate and Instructions

81165 Bumper Wide Front Blue Rus

$6.95ITEM: RPMC8119

81165 Bumper Wide Front Blue Rus

60 found, showing page 1 of 3