Weights

24 found, showing page 1 of 2

2 OZ TRUNGSTEN CYL WEIGHT

$16.99ITEM: DWXCWK01

Tungsten Cylinders are one of the easiest ways to add weight to your Pinewood Derby Car. With tungsten being 1.7 times denser than lead and over 2 times denser than zinc the Derby Worx Incremental Tungsten Cylinder kit  makes adding plenty of weight to your derby car as simple as drilling a hole.

Each 2 oz. Tungsten Cylinder Kit contains 8 pieces of precision sized 3/8” dia, high density, tungsten:

2 pieces: 1/2 oz,  2 pieces: 1/4 oz. 4 pieces: 1/8 oz. will give the car builder a dense compact weight solution with adjustability for precise weight and balance. Weights are easily installed by drilling a 25/64” hole in the body in the desired weighting location.

Due to its very high density Tungsten is an excellent weighting material for pinewood derby cars. Only gold, platinum, and a few other rare and expensive metals have a similar density. Tungsten is approximately 1.7 times denser than lead and 3.2 times denser than the zinc (“lead-free”) weight often used on pinewood derby cars, thus it allows a tremendous amount of freedom in the car design especially for speed by allowing the builder to place a large amount of weight in a small, aerodynamic area.  Also tungsten is completely non-toxic and environmentally friendly.

DERBY WORX tungsten products are made using a process called  “Sintering”, this is the process of compacting and forming a solid mass of material by heat and pressure without melting it to the point of liquefaction. This allows us to make very high density, precision weight and sized products for all forms of Pinewood Derby Construction. You will find not only is Derby Worx tungsten the highest density available but it is finish polished for the very best fit and appearance.

2 OZ TRUNGSTEN CUBE WEIGHT

$16.99ITEM: DWXCWS01

  The Derby Worx 2 oz. Tungsten Cube kit contains 12 high density 1/4” tungsten cubes, perfect for adding weight in small areas of thinly designed derby cars.  

2.6OZ SLOTTED TUNGSTEN CANOPY

$23.99ITEM: DWXSRD01

   This is the Hot Rod of weights! It is 1” in diameter & 2.6 oz. tungsten disc with a slot perfect for working your weight in around the rear axle for aggressively rear weighting your car. Putty or cubes can be added in the slot for additional weight.  

3.5 oz Tungsten Canopy Polished

$26.99ITEM: DWXTC35

Polished Tungsten Canopys are a great way to add weight and a design feature to your racer in one part. It has a stud base for simple mounting, just drill a hole in your preferred weight location and apply with glue.

COMBO WEIGHTS 1 OZ.

$4.99ITEM: PINY0354

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust your car's weight.
Remove portion of weight needed with a hacksaw.
Attach to sides of car using glue or drill a 3/8" diameter hole in
car and glue weights in hole.
Carded packaging with instructions on the rear.

ADJUSTABLE STICK-ON WEIGHTS 2 OZ

$4.99ITEM: PINY0378

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust your car's weight.
Remove portion of weight needed with a pliers.
Attach to bottom of car using the included double stick tape.
Carded packaging with instructions on the rear.

STICK-ON DESIGNER WEIGHTS

$4.99ITEM: PINY0379

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust your car's weight.
Remove portion of weight needed with a hacksaw.
Attach to sides of car using glue or the included double stick tape.
Carded packaging with instructions on the rear.

ROUND WEIGHTS 1 OZ.

$4.99ITEM: PINY1350

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on
race day.
Drill 3/8" (9.5mm) diameter hole in the car and install the weight.
Carded packaging with instructions on rear.

TAPERED WEIGHT 2 OZ.

$4.99ITEM: PINY1351

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on
race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear.

STRIP WEIGHT 2 OZ.

$4.99/ EA

STRIP WEIGHT 2 OZ.

$4.99ITEM: PINY1352

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on
race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear

BAR WEIGHT 2 OZ.

$4.99/ EA

BAR WEIGHT 2 OZ.

$4.99ITEM: PINY1353

FEATURES

The heavier your car, the faster it goes.
Incremental weights allow you to adjust you car's weight, even on
race day.
Break off the amount of weights you need, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with instructions on rear.

REAR WHEEL DRIVE CHASSIS WEIGHT

$6.99ITEM: PINY3911

FEATURES

Increases car speed...the heavier your racer, the faster it goes!
Incremental weights allow racer weight adjustment, even on race day!
Can be modified to fit any racer!
Expertly replicate the underbody of real cars!
Instructions provided on package.

24 found, showing page 1 of 2