Forney Mini Drill Bit Set, 20-Piece$15.99ITEM: 2102754
The product is 20PC Mini Drill Bit Set. Easy to use. The product is manufactured in China.
Pinewood Derby Center Of Gravity Stand$11.99ITEM: BSA618809
This handy tool makes it easy to identify your car's center of gravity so you can position your added weight to maximize speed and maintain control for a smooth, fast run.
PRO AXLE GUIDE$10.99ITEM: DWXPAG01
"Axle Insertion – Ensures accurate mounting of axles (in axle slots) to improve alignment. Accurate alignment is critical for top speed!
Wheel-to-body Spacing – Establishes the correct gap between the wheel hub and car body. The proper gap minimizes car wander and reduces excess contact between the car body and the wheel hubs.
Reduced Risk of Block Damage – During the insertion process the Pro-Axle Guide provides support to the wood around the axle slot, minimizing the risk of damage. "
Pro Body Slotter$15.99ITEM: DWXPBS01
The Pro Body Slotter is the first tool of it’s kind for Pinewood Derby™ racing. It’s unique design allows new/accurate slots to be cut in the body block to help meet the demand of the often required “Axles in the Slot” rule. New slots can be cut to replace improperly cut factory slots, re-locate the wheel base for increased speed or custom design requirements or even by add slots to both sides of the block, the block can be cut in half to make a second car. When paired with a “Pro Axle Guide” perfect axle installation and wheel spacing are a snap in the newly cut slots giving a highly accurate “Axle in Slot” assembly for maximum performance.
1.) Simply mark the body block for the desired location of the new axle slots with a pencil and small carpenters square or ruler.
2.) Install the tool over block and align the location marks on the tool with the marks on the block for the new slots. Snug the set screw to hold the Pro Body Slotter in place with the provided hex wrench.
3.)Using a standard hack-saw with 2 blades (24 teeth per inch) inserted in opposite directions, place the blade into the machined slot in the tool and gently saw back and forth until the bottom of the tool is reached.
*** A saw and 2/24 teeth-per-inch blades are required. ***