Team Associated

Team Associated Truck Parts
 
Team Associated Buggy Parts
 
Team Associated Hardware
 
Team Associated Rims & Tires
 

Team Associated RC10 B6 "Club Racer" 1/10 Electric 2WD Buggy Kit

$369.99ITEM: ASC90013

Ready to get into RC racing?
Team Associated has a solution for you: the RC10B6 Club Racer Kit! Designed with the entry-level racer in mind, it’s fully upgradeable to compete at the pro level. The B6 Club Racer comes out of the box with: big bore shocks, 3-gear transmission with ball differential, and precision ball bearings. Also included is a Reedy Power 17.5 Fixed Timing Brushless motor, Blackbox 600Z Brushless speed control, and high-torque digital servo. The B6 Club Racer boasts speed, durability and the lineage expected of a true champion by design!

Champions by design.
1/10 scale 2WD off road has been Team Associated’s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 16 I.F.M.A.R. World Championships contested since the racing class began. In fact, every Team Associated 2WD buggy platform ever released has won at least one I.F.M.A.R. World Championship!

Club Racer Features:
• Reedy Sonic 540 17.5 Fixed Timing motor produces maximum power output and RPM thanks to an all new stator design, pure copper magnet wire, and low-resistance collector rings. ROAR approved and meets BRCA and IFMAR specs.
• Reedy’s Blackbox 600Z Zero Timing Sensored Brushless Competition ESC is a simple-to-use yet powerful ESC for Spec class racers. Excellent throttle and brake feel, a wide range of adjustability, and robust hardware make the Blackbox 600Z suitable for a variety of Spec racing applications.
• The Reedy 0712MG Metal Gear Digital Servo is race-proven and features numerous enhancements including precision metal gears for added strength and smooth operation, and an advanced microprocessor that improves vehicle control and on-track performance.
• Lightweight, hard-anodized aluminum chassis with centralized mass for improved handling on all track types
• Reverse bellcrank steering allows more room for mounting electronics
• Bolt-on steering block arms for increased adjustability
• Aluminum rear ball stud mount for added strength
• Lightweight aluminum top shaft
• Lightweight aluminum front axle with laser etching
• Factory Team ball bearing kit included
• JConcepts B6 clear body and wing included

1/10 SC10 KMC Wheel/RC10.com RTR

$209.99ITEM: ASCC7030

This is the electric powered, radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with the KMC Wheel Body Trim from Associated.  
                                                                              

1/10 SC10 Rockstar-Makita RTR

$309.99ITEM: ASCC7049

This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run
SC10 RS (Race Spec) Short Course Race Truck
with Rockstar/Makita Body Trim from Associated.
New upgrades from the previous version (#7044) include;
**Water-resistant enclosed receiver box**
**Blue anodized aluminum V2 coil-over shocks**

RC10B6 Team Kit

$279.99/ EA

RC10B6 Team Kit

$279.99ITEM: ASCD0011

FEATURES

Chassis: Hard anodized aluminum, 0.098" (2.5mm) thick pocketed
chassis, optional weights (not included) allow weight bias tuning,
repositioned A plate provides maximum front end clearance
Drive: Two wheel drive with heavy duty rear axle, al

RC10B6D TEAM KIT

$279.99/ EA

RC10B6D TEAM KIT

$279.99ITEM: ASCD0012

The differences between the RC10B6 and RC10B6D are as follows;          
      The RC10B6 is configured for high to very-high traction surfaces.        
         The RC10B6D is configured for low to high traction surfaces.          
          RC10B6                            RC10B6D                            
          Laydown Transmssion               Upright Transmission              
          Gear Differential                 Ball Differential                  
          Gull Wing Front Suspension Arms   Flat Front Suspension Arms        
          Wide Front Shock Tower            Narrow Front Shock Tower          
                                                                              
FEATURES: Chassis: Hard anodized aluminum, 0.098" (2.5mm) thick pocketed      
            chassis, optional weights (not included) allow weight bias tuning,
            repositioned A plate provides maximum front end clearance          
          Drive: Two wheel drive with heavy duty rear axle, aluminum front    
            axle and rear hexes for less rotating mass                        
          Transmission: Standup 3-gear offers more rearward weight for better  
            rear traction                                                      
          Differential: Ball type for more rear traction and better stability  
          Suspension: Flat front arms for more responsive steering and        
            quicker release out of corners, updated ball cups and              
            turnbuckles for precise adjustment and durability                  
          Motor Mount:                                                        
            central positioning for optimum side-to-side balance              
          Shocks: V2 12mm Big Bore aluminum body with 3mm TiN coated shafts    
            and low friction X-rings for improved smoothness, Factory Team    
            aluminum shock bushings, rear shocks may be mounted on front or    
            rear of rear arms                                                  
          Ball Bearings: Full set Factory Team upgraded                        
          Steering: One-piece blocks with bolt-on Ackermann plate, Ackermann  
            refers to the effect of the inner front wheel rotating faster than
            the outer front wheel during turns, reverse bell-crank steering    
            rack design offers more room for electronics                      
          Body: Clear buggy, screw-mounted wing by JConcepts                  
          Battery Hold-Down Strap: Adjustable to allow weight bias tuning      
                                                                              
INCLUDES: RC10B6D Team Buggy Kit with Body, Rear Wing, Shocks, Decals and      
            Instruction Manual                                                
                                                                              
REQUIRES: Radio: 2-channel with high-torque steering servo                    
          Motor: 540 size                                                      
          ESC:                                                                
          Battery: 7.4V LiPo or 6.6V LiFe, saddle, shorty or square pack      
          Battery Charger:                                                    
          Wheels: 1/10 scale buggy                                            
          Tires: 1/10 scale buggy                                              
          Pinion Gear: 48P                                                    
          Paint, building and track equipment                                  
                                                                              
SPECS:      Vehicle;                                                          
          Length:                                                              
          Width:                                                              
          Height:                                                              
          Wheelbase: 11-11.1" (280-282mm)                                      
            Body;                                                              
          Length: 11.4" (289mm)                                                
          Width:  5" (127mm)                                                  
          Height: 2.8" (71mm)                                                  
                                                                              
COMMENTS: For replacement or to upgrade to Ball Bearings use:                  
            Qty.  Size      Location                  Qty. Bearing Set  

Associated 1/10 RC10B64D Team 4WD Kit

$429.99ITEM: ASCD0015

PRODUCT INFORMATION  

**Additional Technical Info Will Be Added When It Becomes Available.**
This is the 1/10 scale Electric Powered, Radio Controlled
Off-Road Competition RC10B64D Buggy Kit from Team Associated.

FEATURES
Chassis: Constructed of --"

SC28 RTR Lucas Oil Edition

$49.99ITEM: ASCD0150

FEATURES

Chassis: Molded plastic
Drive: Rear wheel
Radio: 2.4GHz pistol grip with built-in battery charging cable
Battery: LiPo
Body: Trimmed with Carl Renezeder Lucas Oil racing scheme
Front Bumper: Flexible molded plastic
Shocks: Two rear shock

RC8T3 Nitro Team Kit

$599.99/ EA

RC8T3 Nitro Team Kit

$599.99ITEM: ASCD0917

This is the Radio Controlled, Glow Powered, 1/8 scale              
         Off-Road RC8T3 Competition Truggy Kit from Team Associated.          
                                                                              
FEATURES: Chassis: 0.12" (3mm) thick 7075-T6 hard-anodized aluminum, with      
            optimized weight bias layout for improved handling and stability  
          Drive: Four wheel shaft with six universal driveshafts              
          Differentials: New V2 geared design for longer life, fast access for
            quick removal and tuning                                          
          Gearboxes: 4.6:1 internal ratio                                      
          Body: Pro-Line RC8T3 clear body, Team Associated rear wing molded in
            black                                                              
          Shocks: 7076-T6 aluminum bodied 16mm Big Bore threaded with TiN      
            coated 3.5mm diameter shafts, larger diameter springs, and        
            optimized bladders for more precise volume compensation            
          Shock Towers: 7076-T6 aluminum, 0.197" (5mm) thick front tower,      
            0.157" (4mm) thick rear tower                                      
          Front Suspension: Pillow ball uprights for increased adjustability  
            and durability                                                    
          Rear Suspension: Refined geometry with lower hinge pin inserts for  
            quick and easy roll center adjustments                            
          Engine Mount: Two-piece aluminum, sliding design for easy gear mesh  
            adjustment and engine removal                                      
          Brake: Bonded pads and machined steel rotors                        
          Clutch: 3 shoe metal, 13 tooth steel clutch bell                    
          Spur Gear: 46 tooth                                                  
          Fuel Tank: Molded plastic construction with splash guard            
                                                                              
INCLUDES: RC8T3 Truggy Kit with Clear Body, Fuel Tank, Shocks, Decals          
            Shock Oil, Diff Oil, Air Filter and Instruction Manual            
                                                                              
REQUIRES: Radio: 2-channel with high torque steering servo                    
          Engine: .21 cu in rear exhaust                                      
          Receiver Pack: 4.8 - 7.4V flat, LiPo, LiFe or NiMH                  
          Wheels: 1/8 scale truggy                                            
          Tires: 1/8 scale truggy                                              
          Fuel: Model car blend, 30% nitro recommended                        
          Glow starter, fuel bottle, starter box, tools and track equipment    
                                                                              
SPECS:      Vehicle;                                                          
          Length: 22" (560mm)                                                  
          Width: Varies                                                        
          Weight: Varies                                                      
          Wheelbase: 14.8 - 15.01" (376.5 - 381.5mm)                          
            Body;                                                              
          Length: 16.2" (412mm)                                                
          Width: 7.5" (190mm) at widest point                                  
          Height: 3.6" (91mm)                                                  
                                                                              
COMMENTS: For Replacement Ball Bearings use:                                  
            Qty.   Size    Location       Qty.           Stock Number          
             2    8x16mm   Fr Diff         1               DTXC1585            
             2    8x16mm   Ctr Diff        1               DTXC1585            
             2    8x16mm   R Diff          1               DTXC1585            
             4    6x10mm   Steering        2               DTXC1561            
             4    5x8mm    Steering        2               DTXC1523            
             2    6x12mm   Fr Gearbox      1               DTXC1569            
             2    6x12mm   Rear Gearbox    1               DTXC1569            
             4    8x16mm flanged Fr Uprights  2            ASCC1565            
             4    8x16mm flanged R Uprights   2            ASCC1565            
             2    5x10mm   Clutch          1               DTXC1535  

1/8 RC8T3e Electric Team

$499.99ITEM: ASCD0918

This is the Radio Controlled, Electric Powered, 1/8 scale off-Road RC8T3e Competition Truggy Kit from Team Associated.          
                                                                              

RC8.2E RS RTR

$499.99/ EA

RC8.2E RS RTR

$499.99ITEM: ASCD19**

This is the electric powered, radio controlled, 1/8 scale            
           Ready to Run RC8.2E Off-Road Buggy from Team Associated.            
                                                                              
FEATURES: Chassis: 7075 hard anodized aluminum 0.14" (3.5mm) thick, with keyed
            lower suspension plates                                            
          Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center
            drives, 3.5mm light CVA drivetrain with full ball bearings        
          Radio: XP 2G 2.4GHz with high-torque DS1510 metal gear servo        
          Motor: Reedy 2000kV brushless                                        
          Electronic Speed Control: Reedy brushless with T-Plug connector,    
            2S-4S LiPo compatible                                              
          Motor Mount: Blue anodized aluminum                                  
          Body: Trimmed RC8e buggy body, painted in either red or blue        
          Differentials: Planetary gear                                        
          Shocks: Oil-filled 16mm Big Bore, 6061 aluminum                      
          Shock Towers: 7075 aluminum 0.12" (3mm) thick                        
          Suspension: Updated RC8.2 racing suspension geometry                
          Steering: Aluminum steering knuckles                                
          Ball Bearings: Full set included                                    
          Wheels: Dish type, white in color 17mm hex, 1.6" (49mm) wide, 3.3"  
            (83mm) diameter                                                    
          Tires: High traction knobby tread                                    
          Caster: Adjustable with caster blocks that adjust 14, 16, or 18° with
            molded inserts, caster/toe-in refers to the angle of the front    
            suspension when viewed from the side of the car in relation to the
            chassis                                                            
          Camber: Adjustable, camber refers to the angle of the tops of the    
           tires from vertical when viewed from front or behind vehicle        
                                                                              
INCLUDES: RTR RC8.2E Factory Team Off-Road Buggy with Brushless Motor, 2.4GHz  
            Radio, ESC, Painted Body, Wrenches, Extra Servo Horns, Shock      
            Spacers and Instruction Manual                                    
                                                                              
REQUIRES: AA Batteries: Eight for transmitter                                  
          Battery: 3S-4S LiPo pack                                            
          Battery Charger: LiPo compatible                                    
          Building and track equipment                                        
                                                                              
SPECS:      Vehicle;                                                          
          Length: 18.5" (470mm)                                                
          Width:  12"   (305mm)                                                
          Wheelbase: 12.7" (323mm)                                            
          Internal Gear Ratio: 4.30:1                                          
          Weight: 8.07lbs (3661g)                                              
            Body;                                                              
          Length: 14.6" (370mm)                                                
          Width:   7.9" (200mm)                                                
          Height:  4.4" (112mm)                                                
                                                                              
COMMENTS: Available in thew following body colors;                            
            Blue, ASCD19BB                                                    
            Red, ASCD19RR                                                      
                                                                              
          For Replacement Ball Bearings use:                                  
            Qty.  Size      Location                  Qty. Bearing Set        
             2   8x16mm    Front Diff                  1    DTXC1585          
             2   8x16mm    Center Diff                 1    DTXC1585          
             2   8x16mm    Rear Diff                   1    DTXC1585          
             2   8x16mm    Front Hubs                  1    DTXC1585          
             2   15x21mm   Front Hubs                  1    DTXC1601          
             2   8x16mm    Rear Bulkhead               1    DTXC1585          
             2   8x16mm    Rear Hubs                   1    DTXC1585          
             2   15x21mm   Rear Hubs                   1    DTXC1601  

RC10T5M Kit

$279.99/ EA

RC10T5M Kit

$279.99ITEM: ASCD7001

This is the Radio Controlled, Electric Powered, 1/10 scale           Team Associated RC10T5M Off-Road Competition Truck Kit.

1/10 RC10SC5M Team Kit

$309.99ITEM: ASCD7006

This is the Radio Controlled, Electric Powered, 1/10 scale          
Team Associated RC10SC5M Short Course Truck Kit.

SC10 RTR Pro Comp w/2.4

$209.99ITEM: ASCD7028

This is the electric powered, radio controlled, 1/10 scale, ready to run    
  SC10 Short Course Race Truck with the Pro Comp Body Trim from Associated.    
                                                                              
FEATURES: Chassis: Molded composite low CG design with side nerf bars,        
            hinged battery hold down strap fits NiMH and LiPo battery packs    
          Drive: Rear wheel with steel rear dogbone drive shafts              
          Motor: Associated Reedy Radon 17 turn                                
          Radio: Associated XP2G 2.4GHz 2-channel pistol grip with DS1903MG    
            metal gear steering servo, transmitter does not have charge jack  
          ESC: SC550                                                          
          Shocks: Oil-filled with blue aluminum bodies                        
          Body: 0.040" (1mm) thick painted and trimmed with SC10 Team AE trim  
          Differential: Sealed, planetary gear                                
          Spur Gear: 87 tooth                                                  
          Slipper Clutch: Dual sided, externally adjustable                    
          Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in    
            color                                                              
          Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)  
            diameter, 1.7" (43mm) wide                                        
          Caster: Adjustable, caster/toe-in refers to the angle of the front  
            suspension when viewed from the side of the car in relation to the
            chassis                                                            
          Camber: Adjustable, camber refers to the angle of the tops of the    
            tires from vertical when viewed from front or behind vehicle      
          Bumpers: Front and rear with functional rear rubber mud flaps        
          Ball Bearings: 14 rubber sealed                                      
          Suspension: Fully adjustable with steel turnbuckles                  
          Steering: Angled bellcrank "coplanar" steering with integral servo  
            saver                                                              
                                                                              
INCLUDES: SC10 Short Course Race Truck Kit from Associated with tires, wheels,
            painted body, motor, radio, ESC and instruction manual            
                                                                              
REQUIRES: Transmitter Batteries: Six AA-size                                  
          Battery: 6-cell stick pack with standard connector                  
          Battery Charger: To match selected battery                          
          Building and track equipment                                        
                                                                              
SPECS:      Vehicle-                                                          
          Length: 21.6" (550mm)                                                
          Width:  11.5" (293mm)                                                
          Track:   9.6" (245mm)                                                
          Weight:  4.6lbs (2080g)                                              
          Wheelbase: 12.9" (327mm)                                            
          Internal Gear Ratio: 2.6:1                                          
            Body-                                                              
          Length  21.6" (550mm)                                                
          Width   11.5" (293mm) at front fenders, widest point                
                   8.8" (224mm) at center section, narrowest point            
          Height:  6"   (153mm)                                                
                                                                              
COMMENTS: For Replacement Ball Bearings use:                                  
            Qty.  Size         Location           Qty.     Bearing Set        
             2   6x10mm      Transmission          1        DTXC1561          
             2  3/16 x 3/8"  Transmission          1        DTXC1423          
             2  3/16 x 3/8"  Idler Gear            1        DTXC1423          
             4  3/16 x 3/8"  Rear Hubs             2        DTXC1423          
             4  3/16 x 3/8"  Front Hubs            2        DTXC1423  

Lucas Oil SC10 Brushless RTR

$329.99ITEM: ASCD7046

This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run SC10 RS (Race Spec) Short Course Race Truck with Lucas Oil Body Trim from Associated.
                    
New upgrades from the previous version (#7040) include;    
        
**Water-resistant enclosed receiver box**                      
**Blue anodized aluminum V2 coil-over shocks**                    

RC10B4.2 RS RTR

$249.99/ EA

RC10B4.2 RS RTR

$249.99ITEM: ASCD93**

This is the 1/10 scale electric powered, 2.4GHz radio controlled, ready to run, Associated RC10B4.2 (Race Spec) off-road Buggy.