Servos

Dromida 1/18 Mini DS100 Servo w/Universal Servo Saver

$10.99ITEM: DIDM1005

Dromida 1/18 Mini DS100 Servo w/Universal Servo Saver

Overview:

This is a replacement Dromida 1/18 Mini DS100 Servo with a Universal Servo Saver.

Mini Servo, Water Proof

$17.99ITEM: DYN3915

Mini Servo, Water Proof

Overview:

Dynamite Mini Servo, Water Proof for Proboat 9-17" Boats DYN3915 is compatible with PRB0300, PRB0400, PRB08016, PRB08019, PRB08020, PRB08023, PRB08024, PRB08044T1, PRB08044T2, PRB3650B

ProTek RC 100SS Standard Digital "Super Speed" Metal Gear Servo

$49.99ITEM: PTK-100SS

ProTek RC 100SS Standard Digital "Super Speed" Metal Gear Servo

Overview:

This is the ProTek R/C 100SS Digital Super Speed Metal Gear Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what the competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support. The ProTek R/C 100SS Digital Super Speed servo delivers a swift 0.09 transit speed and 168 oz-in of torque. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a cored motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.

ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage)

$89.99ITEM: PTK-130T

ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage)

Overview:

This is the ProTek R/C 130T Digital Hi-Torque Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support. The ProTek R/C 130T High Voltage Hi-Torque servo delivers an incredible 288 oz-in of torque with a 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 355 oz-in and 0.08! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency. Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back. Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.

Features:

Features: - Ideal for any 1/10 to 1/8 scale vehicle application - Aluminum middle case - High voltage circuitry - 0.10 transit speed, and 288 oz-in of torque @ 6.0V - 0.08 transit speed, and 355 oz-in of torque @ 7.4V - Aluminum single arm servo horn - Full metal gears and dual ball bearings - 200mm long 22awg connector wire w/gold plated connectors - Coreless motor

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T)

$12.99ITEM: PTK-7800-BK

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T)

Overview:

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 19.75mm & 24.25mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features: - Clamp design - 19.75mm & 24.25mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) - 4mm thick arm - 35.5mm Overall length - Linkage holes threaded for 3mm hardware - 25T Spline Futaba/Orion/Savox/ProTek Output Shaft

H3065 Mid-Torque Ultra-Speed Micro Heli Tail Servo

$27.99ITEM: SPMSH3065

H3065 Mid-Torque Ultra-Speed Micro Heli Tail Servo

Overview:

PRODUCT SPECIFICATIONS Size Category: Minis and Micros Type: Digital Application: 250 - 450 size heli, tail (Frequency – 333hz) Torque: 15.75 oz-in (1.1kg-cm) @ 6.0V Speed: 0.036 sec/60° @ 4.8V, 0.029 sec/60° 6V,0.029 sec/60° @ 6.0V Length: 0.91" (23mm) Width: 0.47" (12mm) Height: 1.17" (29.6mm) Weight: 0.46 oz (12.9 g) Bushing Or Bearing: Bearing Connector Type: Universal Gear Material: Metal Voltage: 4.8 - 6.0V