Model Glue/Adhesives & Thinners

23 found, showing page 1 of 2

Odorless Enamel Thinner  35ml Bottle

$7.99ITEM: AKI-49

This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint.

Bob Smith Industries Super-Fix System Adhesive and Filler Combo Pack

$15.99ITEM: BSI158

Super-Fix is two-part adhesive system developed to fill gaps and voids. It is sandable and paintable and cures in 1 – 3 seconds. Super-Fix is great for repairs at home, on autos, boats, and motorhomes. The super-thin consistency is perfect for bonding Metal, Plastic,  Wood, Ceramics, Rubber, Leather, Glass, Auto Bumpers, Fiberglass and more.

IC-Loc™ Blue 1.69oz

$14.49ITEM: BSI172

IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required.

Micro Set Setting Solution (1oz) by Microscale Industries

$4.49ITEM: MSIMI1

This is a one ounce bottle of Microscale Industries Micro Set Setting Solution. Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing.

ZAP-RT Rubber Toughened CA Glue 1 oz

$8.49ITEM: PAAR2244

This is a tube of Pacer ZAP-RT Rubber Toughened C/A. ZAP-RT (Rubber Toughened) is our newest glue product, offered with our revolutionary, patented, No-Drip Tip. Formulated for numerous hobby and craft applications, ZAP-RT is extremely strong and flexible.

Plastruct Plastic Weld (2oz)

$5.49ITEM: PLSU1099

• The leading general purpose solvent cement for fast, permanent bonding of most dissimilar plastics.
• Immediately tacky, sets in minutes.
• Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic and more.
• Actually dissolves a thin film of the surfaces to be joined, creating a bond as strong as the surrounding areas.
• Also works as a liquid filler. Full coverage attained by capillary action. Comes with applicator brush in cap.

Tamiya Lacquer Thinner (250ml)

$9.99ITEM: TAMR7077

A diluted lacquer thinner that is "plastic friendly," causing minimal damage to plastic models. Can be used for any of the following:

• Remove paint from paint brushes and other painting tools
• Dilute Liquid Surface Primer allowing it to be used in airbrushes
• Thin out putty such as Tamiya Putty (Basic Type)
• Dilute lacquer based paints
• Clean paint, oil etc. from various surfaces, including putty and actual model

Tamiya Acrylic/Poly Thinner X-20A (46ml)

$3.99ITEM: TAMR8130

Tamiya X-20A acrylic thinner is the perfect choice to thin Tamiya acrylic paint when spraying through an airbrush or cleaning bristle brushes. The formula within the thinner gives Tamiya acrylic paints the right consistency to blend colors without fading or spotting. This bottle is 46ml in size.

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.

When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.

• X designated colors have a glossy finish while XF designated colors are flat finish.
• The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
• The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
• For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

Tamiya Acrylic/Poly Thinner X-20A (250ml)

$8.99ITEM: TAMR8140

Tamiya X-20A acrylic thinner is the perfect choice to thin Tamiya acrylic paint when spraying through an airbrush or cleaning bristle brushes. The formula within the thinner gives Tamiya acrylic paints the right consistency to blend colors without fading or spotting. This bottle is 250ml in size.

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.

When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.

• X designated colors have a glossy finish while XF designated colors are flat finish.
• The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
• The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
• For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

Tamiya Plastic Cement (20ml)

$3.49ITEM: TAMR8712

This is liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. The hexagonal 20ml bottle includes an applicator brush attached to the cap for easy application.

• Contains 20ml per bottle.
• Average drying time is 10-15 minutes before you can move onto the next step of construction.
• Fully cures in 24 hours.

Tamiya Extra-Thin Cement (40ml)

$5.99ITEM: TAMR8738

Liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. This EXTRA THIN formula cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.

• Contains 40ml per bottle.
• Average drying time is 5-10 minutes before you can move onto the next step of construction.
• Fully cures in 24 hours.

Testors Non-Toxic Liquid Cement with Precision Applicator (1 oz)

$5.49ITEM: TES3527C

Non-Toxic Liquid Cement for Plastics with Precision Applicator

• Fast drying general purpose glue
• Use for polystyrene and ABS plastic
• Precision needle applicator makes easy work of gluing even small intricate detailed parts
• Recommended for ages 8 years and up

Testors Wood Cement (5/8 oz)

$2.99ITEM: TESR1503

5/8 oz. Extra Fast-Drying Wood Cement

• Use for bonding wood quickly
• Great for wood and balsa wood

Testors Plastic Cement Tube (18ml)

$2.49ITEM: TESR1601

• Quick drying cement for plastic models.
• Joins polystyrene to polystyrene and polystyrene to wood.
• Also useful for repairing household items made of polystyrene or ABS plastics.

Testors Non-Toxic Cement (5/8 oz)

$2.49ITEM: TESR1621

This is a 5/8oz Tube of Non-Toxic Cement for Plastic Models from Testors

• Safe cement for plastic models
• Joins polystyrene to polystyrene
• Also useful for repairing household items made of polystyrene or ABS plastics

23 found, showing page 1 of 2