GMADE

GMADE Vehicle Parts
 

Gmade 1/10 GS01 Sawback Sports 4WD EP Rock Crawler Kit

$299.99ITEM: GMA53000

EARN 300 REWARDS POINTS ON THIS ITEM

Designed from the ground up for scale performance and great looks with or without a body, the Sawback does not disappoint!

New realistic GS01 chassis with high strength nickel plated steel c-channel side rails
Suspension system with leaf springs and TS-03 aluminum shock absorbers
Solid gear diffs for both front and rear axles
Ball bearings in every rolling component
Realistic VR 01 1.9"" beadlock wheels made from high strength plastic
Adjustable battery plate
Realistic seats, steering wheel, shifter, mirror, and foldable windshield

The steel ladder C channel frame forms the ground work for a great rig and a scale finish. The steel has been nickel plated to resist corrosion and looks great too! Next add a dust proof receiver box that has been molded to look like a real engine cover. The receiver box also provides a spot to mount your ESC to keep your rig looking clean.

To help push performance to the max, an adjustable battery tray offers the lowest possible center of gravity, while allowing for the use of a variety of packs. The center skid plate is designed to run smoothly over any surface without getting stuck. The suspension of this beast is handled through a combination of aluminum shock absorbers and leaf spring suspension. The one piece axle housing mounts to these leaf springs with U bolts, completing that scale look. Add a metal differential cover to seal in your solid differential gear for icing on a very delicious cake.

To get the power to the axles, a dust proof transmission is used. The transmission housing features a metal motor mount to keep everything precise and secure. The power is then transmitted to the axles with universal shafts. Just to ensure there is no loss of power every rolling component uses ball bearings. Where is all this power going? Out to the MT-1901 off-road tires mated to VR01 1.9 inch beadlock wheels. This tire and wheel combination provides excellent traction in almost any environment. A beautiful clear Lexan scale body with driver seats, steering wheel, shifter, side view mirrors and a fold down windshield will make anyone green with envy.

GS01 CHASSIS
The GS01 ladder frame is designed to look like the chassis of a real car and is made of high strength steel. The C-channel side rail offers added stability and is bolted with cross members to aid against twisting or warping. The steel parts are also nickel plated for a glossy look and are resistant to corrosion.

GS01 DRIVE TRAIN
The one-piece graphite axle housing is made of high strength plastic for maximum durability and easy maintenance. Inside, both front and rear axles have solid differential gears to provide a stronger driving force in any driving conditions. The gears are protected by a glossy metal cover for added scale realism.

GS01 SUSPENSION
TS-03 Aluminium Shock Absorbers: Internal spring shocks with CNC machined aluminium have been added to help absorb excessive shock action.

Leaf Springs: Using U-bolt technology to hold the axle and leaf securely provides great driving performance for any type of surface or setup.

GS01 ADJUSTABLE BATTERY PLATE
The GS01 battery plate is designed to offer the lowest center of gravity to the chassis to enable a stable driving motion. It is also adjustable, allowing different batteries to be used while still being held securely.

Gmade Komodo 1/10 RTR Scale 1.9 Rock Crawler

$379.99ITEM: GMA54016

EARN 380 REWARDS POINTS ON THIS ITEM

The Gmade Komodo 1/10 Ready to Run Rock Crawler is built off of a steel, nickel plated frame and includes the awesome G-Transition internal spring shocks for unmatched scale detail and crawling prowess. Another feature that sets this truck apart from the crowd is the included scale accessories. Roof rack, snorkel, sand ladders, grille, heavy duty front and rear bumpers, rear view mirrors, windshield wiper grille, light buckets and more are all included as standard accessories to give you the most realistic experience possible.

Other standard features include Gmade MT 1903 super soft compound 1.9 x 4.3" tires and NR02 beadlock wheels that give the traction needed to claw your way to the top of the mountain. An adjustable battery tray allows you to fit a variety of different battery types, and the highly detailed, dust proof receiver box will keep your electronics safe and concealed when the going gets rough. Combine this with aluminum 4-link suspension and steering rods, solid spool type 32 tooth front and rear locked differentials, metal gear covers and one piece graphite axle housings, and you have a recipe for unmatched scale adventure. Add your electronics to this incredible package and you are ready for the rocks!

The Komodo RTR body is fully trimmed and finished in a dark grey finish, and when the included scale accessories are added, it gives the body a realistic look that cannot be matched by other RTR scalers.
G-Transition Aluminum Oil Shocks with Internal Springs
MT-1903 1.9 x 4.3" Tires & NR02 Beadlock Wheels with Center Hubs
Full Time 4WD
One Piece Graphite Axle Housings & Metal Gear Covers
Solid Spool Locked Differentials
Dust Proof Transmission
Metal Motor Mount
Full Bearings
Universal Driveshafts

Gmade Sawback 4LS 4-Link 1/10 Rock Crawler Kit

$299.99ITEM: GMA55000

EARN 300 REWARDS POINTS ON THIS ITEM

The Gmade Sawback 4LS combines 4-link suspension, 1.9"" tires and wheels, and 93mm XD Aeration shocks to deliver a dramatic performance upgrade. By getting rid of the leaf springs and small 1.5"" tires that are found on the standard Sawback, the 4LS offers reduced torque twist, increased suspension articulation and improved ground clearance. Additionally, the Sawback 4LS body has been finished off with a tube front bumper, grille, roll bar and detailed interior components to elevate the appearance of this awesome scale rig.

Gmade NR01 beadlock wheels are combined with MT 1903 super soft compound 1.9"" tires to keep the rig rolling. An adjustable battery tray allows you to fit a variety of different battery types, and the highly detailed, dust proof receiver box will keep your electronics safe and concealed when the going gets rough. Combine this with aluminum steering rods, solid spool type 32 tooth front and rear locked differentials, metal gear covers and one piece graphite axle housings, and you have a recipe for unmatched scale adventure. Add your electronics to this incredible package and you are ready for the rocks!

Features:
93mm XD Aeration Aluminum Oil Shocks
MT-1903 1.9 Tires & NR01 Beadlock Wheels with Center Hubs
Full Time 4WD
One Piece Graphite Axle Housings & Metal Gear Covers
Solid Spool Locked Differentials
Dust Proof Transmission
Metal Motor Mount
Full Bearings
Universal Driveshafts
Sawback Body with Included Scale Accessories

Gmade GR01 GOM 1/10 4WD Rock Crawler Buggy Kit

$339.99ITEM: GMA56000

EARN 340 REWARDS POINTS ON THIS ITEM

Full Tube Frame Chassis: The tube chassis is lightweight and extremely rigid. The frame structure effectively compensates from external impact.

Front Weight Balance: GOM's forward weight balance will increase the tire traction to the front wheels to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing.

Chassis Mounted Servo with Panhard Bar: GOM's chassis mounted steering system is designed to make it as close to zero bump steer so steering is not affected by front wheel suspension movement.

Dustproof Receiver Box: The receiver box helps keep dirt and debris out of the receiver.

Forward Easy Access Battery Door: Allows room for various types of batteries and are easily removed and installed.

Skid Plate: The skid plate protects the transmission and other critical components with a flat surface.

Drivelines: The transfer case and rear axles are arranged to keep the drive lines straight to reduce driveshaft stress.

Transmission and Transfer Case: The transmission and transfer case are designed to be as scale as possible with the same proportions as a 1:1 vehicle. The transmission and transfer case can be controlled with one servo.

2-Speed Transmission: The 1st gear is for hardcore rock crawling. The 2nd gear is for hill climbing or high-speed driving.

ROCK Transfer Case: Includes reduction gear and dig function, to transmit the power evenly thought the front and rear axles. The dig aids in extreme climbs, descents and tight technical turns.

Dual Slipper Clutch: The slipper pads are designed to hold the spur gears evenly to allow more precise settings.

Easy Adjust Motor Mount: Easily replace and install the motor pinion gear to change the gear ratio.

GA60 Axle: The GA60 axles are made of high strength materials, with a one piece durable solid axle housing. The axle tube is structurally reinforced with an axle truss, and the angle of the differential cover is designed to reduce the risk of breakage due to frontal impact.

Hi Steer Zero Ackerman Knuckle Arm: Increases steering link clearance.

Adjustable Castor: The GA60 front axle can be adjusted to have a smooth and short turn angle depending on the driving style or to adjust to improve straight stability by changing the caster angle.

Kingpin Angle: Scrub radius is kept to a minimum to let your steering servo work at it's full potential and increases the steering efficiency.

Panhard Bar Axle Mount: The GA60 axle can be equipped with the panhard bar axle mount to achieve various types of suspension link setups.

Rear Dual Shock Mounts: The rear suspension allows the option of adding a dual shock setup.

XD Aeration 103mm Shocks: This XD aeration shock is a coil over shock is perfect for off-road driving. CNC aluminum shock bodies and 3.5mm shock shafts provide high durability. Simple to change the rebound by using the aeration shock cap screw.

2.2"" M/T Tires: 2.2"" Off-road tires with Gmade 2.2"" Beadlock wheels.

Interior Cockpit: Includes realistic detailing racing bucket seats, handles and gearboxes to add realism to your cockpit interior.