Fillers & Putty

Citadel Green Stuff - Modeling Putty

$8.49ITEM: 66-13

This is the same putty that the Citadel Design teams use to make our models. If you're up to the job, it can be used to remodel features or make your own models from scratch. Green Stuff is also very good for filling gaps in larger mulit-piece models. It is very tough once set and can also be used to attach pieces in some situations - for example, fixing riders onto horses. This pack contains 20g of Green Stuff putty.

Kneadatite Green Stuff Epoxy Putty Tape - Blue/Yellow 1"x36"

$15.79ITEM: GTF-23

Kneadatite Blue/Yellow ("Green Stuff") is a two-part epoxy/polyamide sealant/adhesive for interior and exterior maintenance and repair. It has excellent adhesion to stone, ceramic, metal, wood and many plastics, including vinyl.

Nicknamed "Green" by sculptors and modelers, Blue/Yellow is well-known for its long worklife, non-grainy texture and ability to hold fine detail. Cured models withstand up to 4 vulcanizations. Blue/Yellow is not intended for structural applications.

HOW TO USE IT:
To achieve optimum adhesion, repair surfaces should be scuffed and/or lightly sanded and cleaned free of grease or dirt prior to application.

Side-by-side tape: Cut or twist off a length of tape and mix by kneading with damp fingers to a uniform color. Any length contains the correct ratio of base to curing agent. Apply within 1 hour of mixing.

Blue/Yellow has a 1 to 2 hour work life, Functional cure occurs in 4 to 5 hours when Blue/Yellow can be drilled, sawed, carved, sanded, stained, and painted. Ultimate hardness is reached in 20 to 24 hours. Cured color is green.

Kneadatite Green Stuff Epoxy Putty Bars - Blue/Yellow

$15.79ITEM: GTF-60

Kneadatite Blue/Yellow Epoxy Putty Bars "Green Stuff"

Putty-like consistency eliminates drips and runs for a "no mess" application

Features:
No tools required for use
Mixes in minutes.
Long worklife
Superior strength and flexibility
Paintable
No shrinkage; solvent and VOC-free
Solvent-resistant
Cures underwater

Kneadatite® Blue/Yellow® is Excellent for modeling, making molds and prototypes • #1 preferred sculpting putty since the early '70s

Kneadatite Blue/Yellow ("Green Stuff") is a two-part epoxy/polyamide sealant/adhesive for interior and exterior maintenance and repair. It has excellent adhesion to stone, ceramic, metal, wood and many plastics, including vinyl.

Kneadatite ® Blue/Yellow ® Epoxy Putty Tape and BarsNicknamed "Green" by sculptors and modelers, Blue/Yellow is well-known for its long worklife, non-grainy texture and ability to hold fine detail. Cured models withstand up to 4 vulcanizations. Blue/Yellow is not intended for structural applications.

Blue/Yellow is available in 2 forms: as a roll of side-by-side epoxy putty tape and as 2 round bars in a reusable plastic tube.

Hobbico HobbyLite Filler White 8 oz

$7.49ITEM: HCAR3400

This is a White Colored Filler for filling gaps in the wood of an aircraft
fuselage, wing, or tail section before covering is applied for smoother
finishes.  Ready-to-Use, no preperation or mixing is required.
Filler is very easy to sand, so even sloppy applications can be
smoothed for a very nice looking finish.

White Putty Carded 2.3oz Tube by Squadron

$5.49ITEM: SQU-20200

This is a 2.3 Oz. Tube of White Putty from Squadron Tools.  This putty features fine grained white filler.  Ideal for filling seams, sink holes and recontouring.  Also dries hard, has little shrinkage and sands smooth.  Easy to paint over without primer, and carded packaging.

Green Putty Carded 2.3oz by Squadron

$5.49ITEM: SQU-20201

This is a 2.3 Oz. Tube of Green Putty from Squadron Tools.  This putty features Fine grained green filler.  Ideal for filling seams, sink holes and recontouring.  Dries hard, has little shrinkage and sandsw smooth.  Easy also to paint over without primer.

Squadron Putty Applicator

$9.99ITEM: SQUR2205

• High quality stainless steel micro spatula for applying filler putty to scale models.
• One end is knife shaped, the other shaped similar to a golf putter.
• The handle is octagonal with knurls on six of the sides.

Squadron White Putty (2.3 oz)

$4.49ITEM: SQUR9060

Squadron White Putty (2.3 oz)

Tamiya Putty (Basic Type) (32g)

$5.49ITEM: TAMR8753

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The putty is gray in color and may be applied with a flat surface tool. Note: Tamiya’s basic type putty is not intended to fill large gaps. It is meant to fill in seams and imperfections in plastic model surfaces. The basic putty may also be used for resin model, metal model and vinyl model applications.

Testors Plastic Putty (5/8 oz)

$2.99ITEM: TESR6511

This is a 5/8 Oz. Tube of Contour Putty from Testors.

• Use for filling seams and customizing plastic models
• Allow to dry and work to final contour with knife and sandpaper