E-flite Planes

E-flite Plane Parts
 
E-flite Brand Parts
 
131 found, showing page 3 of 6

E-flite Valiant 1.3m PNP

$149.99ITEM: EFL4975

EARN 180 REWARDS POINTS ON THIS ITEM

The E-flite® Valiant 1.3m park flyer is a downsized version of the big Hangar 9 Valiant 30cc ARF. Like its giant-scale sibling, it has the inherent stability of a classic high-wing model but with more modern lines and larger control surfaces that can provide sporty response when you want it. This Plug-N-Play® version comes with the motor, ESC and servos installed. All you need to do is finish some final assembly, install the receiver, charge a battery and fly.

Key Features
• Based on the popular Hangar 9® Valiant™ 30cc ARF
• Wide flight envelope with sporty performance
• Functional flaps installed
• Powerful 480-size brushless motor and 30A ESC installed
• 6 micro servos installed
• Durable aluminum landing gear with wheel pants
• Optional float set available
• Constructed of durable Z-Foam™ Material

Versatile Performance and Functional Flaps
Some days you just want to unwind with some touch and gos. Others, you want to push the limits with aerobatics. The model's light wing loading, functional flaps and powerful brushless motor give you a big performance envelope to play with so, mild or wild, you can do it all.

High-Output Brushless Power System
The high-output power system delivers thrilling performance when matched with a 2200mAh 3S 11.1V 30C LiPo battery. You can use a wide variety of other 3S battery sizes too. The big, easy-to-access battery compartment can accommodate everything from 1300mAh to 3000mAh packs.

Optional Float Set Available Separately
The model is designed to accept an optional float set. Installation takes just a few minutes and all the necessary hardware is included.

E-flite Clipped Wing Cub 1.2m BNF Basic w/ AS3X and SAFE

$199.99ITEM: EFL5150

EARN 200 REWARDS POINTS ON THIS ITEM

The stock Cub is a legend for its gentle flying characteristics and abundant availability. Searching for a low-cost basic aerobatics alternative, inspired pilots modified the design into an entirely new aviation sensation. The E-flite® Clipped Wing Cub 1.2m park flyer features crisp scale detail and goes beyond the essence of the souped-up variant with inspiring versatility, and an abundance of power. As a result, you get the freedom only a Cub and deliver and the excitement of a hotrod in disguise.

The E-flite Clipped Wing Cub 1.2m is a “Cub Lover’s” must-have. Unlike many scale models with this level of detail, assembly only takes the turn of a few screws. The one-piece wing has outstanding rigidity for aerobatics as well as installation ease. Authentic aluminum wing struts offer fold-away convenience and install with quick-release hardware. Up front is the essential scale component no Cub should be denied— intricate engine detail with the signature flare of cooling baffles. Hidden inside is a powerful brushless motor system that delivers outstanding throttle response and the kind of vertical performance full-scale Cub pilots can only dream about. Functional shock-absorbing landing gear accessorized with matching strut covers and balloon-shaped wheel pants help you handle this beauty on the ground like a pro. Just like the real thing, this park flyer has friendly handling for scale flight that’s relaxing. But all you have to do to wake this sleeper is firewall the throttle and unleash the aerobatics animal within.

Features:
• A classic aerobat with authentic looks and great power
• High-power brushless motor with a robust 40A ESC
• Simple one-piece wing features rigid composite reinforcement
• Fold-away aluminum struts with quick-release hardware and storage
• Intricate scale engine, propeller and surface detail
• Shock-absorbing landing gear with scale covers and wheel pants
• 4-channel control with four micro servos installed
• Lightweight and durable EPO foam construction
• Large front, top hatch makes battery changes simple
• Optional float set makes float plane conversion easy
• Fits a wide range of 3S LiPo batteries from 2200–3000mAh
• Vibrant, high-visibility paint scheme

Functional Scale Detail: Cub lovers will appreciate the intricate detail of the exposed engine cylinders and cooling baffles. But what sets this scale park flyer apart is the functional shock-absorbing landing gear that articulates with concealed springs and is finished off with matching strut covers and fitted wheel pants. In addition, you get top-access for battery installation that maintains the scale outline and allows you to install the flight battery quickly.

Great Power: The power system features a high-speed 10-size brushless outrunner, a robust 40-amp ESC and a 2-blade propeller that combine with your 2200–3000mAh 3S LiPo battery to deliver thrust that helps this Clipped Wing Cub perform well beyond the basic aerobatics flight envelope with ease.

Durable Design: Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.

Fold Away Wing Struts: The wing features a rigid, one-piece design that connects to the fuselage with just a single screw. The aluminum struts lock into position with quick-release hardware and fold away into clips at the wing center section for storage and transport.

Optional Floats: You can turn this classic into a fun float plane simply by adding the optional Float Set (HBZ7390 sold separately). All it takes is the turn of a few screws and you can enjoy the serenity of flying from the local pond or lake.

Bind-N-Fly® Convenience: As an E-flite Bind-N-Fly Basic RC replica, you can enjoy air superiority in no time at all. The Clipped Cub BNF Basic is equipped with Spektrum 2.4GHz technology that's ready to bind to a 5+ channel DSM2/DSMX transmitter so you can be ready to fly within minutes of opening the box.

Timber 1.5m BNF Basic

$249.99/ EA

Timber 1.5m BNF Basic

$249.99ITEM: EFL5250

Overview

Make the world your runway with the amazing Timber™ 1.5m BNF® Basic park flyer. It comes equipped with an unbeatable combination of features that let everyone from newer pilots to expert sticks enjoy a versatile, sport-flying experience unlike any other.

Sport Aerobatics, Off-Field Adventure, Float Plane Fun-It Does it All

If you've been looking for a great, all-around park flyer that's up for anything, and can be flown almost anywhere, this is it. Its innovative design combines the spirited performance of a sport plane with the versatility of a bush plane so you really can have it all.

Tundra-Style Landing Gear or EDO-Style Floats-Both are Included!

Thick grass, gravel paths, local ponds, dirt trails-you can fly off these and many other surfaces that would be impossible for most models this size to handle. The Tundra-style landing gear features functional shock absorbers and oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance when flying off grass. The included float set matches the trim scheme of the airplane and features dual rudders for superb steering control.

Whichever option you choose to fly with, both are easy to install and can be swapped out in minutes.

STOL (Short Takeoff and Landing) Capabilities and an Abundance of Power

The Timber wing is designed with STOL features like wing-tip droops, optional leading edge slats and functional flaps. These, along with the model's powerful brushless motor and lightweight, Z-Foam™ construction, allow it to spring into the air or float down and land in as little as two feet or less.

Brilliant LED Light System

Out of the box, the model comes with realistic-looking nav lights, landing lights, wing-tip strobes and beacons, all installed and powered off the flight battery.

Durable Z-Foam™ Material with Hollow-Core Construction

Its lightweight, hollow-core construction is a big reason the Timber park flyer has such a wide range of capabilities. But don't let the light weight worry you. It's built using proven Z-Foam material that's tough enough to handle just about anything back-country flying can throw at it.

AS3X® Receiver with Optional SAFE® Select Technology

By changing up the binding sequence, newer RC pilots can activate SAFE technology features like self-leveling and angle limits that are built into the receiver. This will allow them to get a feel for the plane's impressive capabilities without feeling like they're in over their head, especially when flying in the wind. As with any SAFE system, they can assign a transmitter switch to turn the SAFE features on and off as needed.

Pilots who don't want to activate SAFE® technology can bind the receiver normally and it will behave like a standard AS3X receiver. They can even fine-tune the receiver's AS3X settings if they have the free Spektrum programming interface and a compatible programming cable (both available separately).

Key Features
•Sporty performance with amazing STOL capabilities
•Functional slotted flaps and optional leading-edge slats
•Shock-absorbing main landing gear with Tundra-style wheels
•Realistic EDO-style floats with dual water rudders
•LED navigation lights, landing lights, beacons and wing-tip strobes
•Lightweight, hollow-core construction
•Durable Z-Foam™ material
•AS3X® receiver with optional SAFE® Select technology
•Powerful brushless motor
•Requires a Spektrum™ DSMX®/DSM2® transmitter, sold separately
•Requires a 3S LiPo battery with an EC3™ connector and charger, sold separately

Product Specifications

Wingspan: 61.0 in (1555mm)
Overall Length: 40.9 in (1040mm)
Wing Area: 559.5 Sq In (36.1 Sq Dm)
Flying Weight: 50.3 oz (1400 g)
Motor Size: 10 size Brushless Outrunner
Servos: Included
CG (center of gravity): 60mm +/- 5mm back from leading edge of wing at the fuselage
Prop Size: 12 x 4
Speed Control : 40A Brushless
Recommended Battery: 2200mAh 3S Lipo with EC3 connector
Flaps: Installed
Charger: Not Included
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes

E-flite Timber 1.5m PNP w/ Floats

$219.99ITEM: EFL5275

EARN 220 REWARDS POINTS ON THIS ITEM

Make the world your runway with the amazing Timber™ 1.5m PNP park flyer. It comes equipped with an unbeatable combination of features that let everyone from newer pilots to expert sticks enjoy a versatile, sport-flying experience unlike any other.

Key Features
• Sporty performance with amazing STOL capabilities
• Functional slotted flaps and optional leading-edge slats
• Shock-absorbing main landing gear with Tundra-style wheels
• Realistic EDO-style floats with dual water rudders
• LED navigation lights, landing lights, beacons and wing-tip strobes
• Lightweight, hollow-core construction
• Durable Z-Foam™ material
• Powerful brushless motor

Sport Aerobatics, Off-Field Adventure, Float Plane Fun-It Does it All
If you've been looking for a great, all-around park flyer that's up for anything, and can be flown almost anywhere, this is it. Its innovative design combines the spirited performance of a sport plane with the versatility of a bush plane so you really can have it all.

Tundra-Style Landing Gear or EDO-Style Floats-Both are Included!
Thick grass, gravel paths, local ponds, dirt trails-you can fly off these and many other surfaces that would be impossible for most models this size to handle. The Tundra-style landing gear features functional shock absorbers and oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance when flying off grass. The included float set matches the trim scheme of the airplane and features dual rudders for superb steering control.

Whichever option you choose to fly with, both are easy to install and can be swapped out in minutes.

STOL (Short Takeoff and Landing) Capabilities and an Abundance of Power
The Timber wing is designed with STOL features like wing-tip droops, optional leading edge slats and functional flaps. These, along with the model's powerful brushless motor and lightweight, Z-Foam™ construction, allow it to spring into the air or float down and land in as little as two feet or less.

Brilliant LED Light System
Out of the box, the model comes with realistic-looking nav lights, landing lights, wing-tip strobes and beacons, all installed and powered off the flight battery.

Durable Z-Foam™ Material with Hollow-Core Construction
Its lightweight, hollow-core construction is a big reason the Timber park flyer has such a wide range of capabilities. But don't let the light weight worry you. It's built using proven Z-Foam material that's tough enough to handle just about anything back-country flying can throw at it.

E-flite Maule M-7 1.5m BNF Basic w/ AS3X and SAFE Select

$269.99ITEM: EFL5350

EARN 270 REWARDS POINTS ON THIS ITEM

While America geared up to go higher and faster, B.D. Maule was hard at work in a quiet country corner developing his vision of an aircraft that would give pilots the ability to do the exact opposite—practically. Maule Air Inc. has flourished ever since by delivering planes around the globe with renowned STOL capability and value. The E-flite® Maule M-7 1.5m park flyer is an officially licensed tribute to the full-size marvel that includes an abundance of scale detail, rugged landing gear, flaps and an optional-use float set so you can conquer any terrain year-round.

The E-flite® Maule M-7 1.5m captures the Short Take Off and Landing (STOL) capabilities, along with the unmistakable lines and character of the rugged full-scale design series. From the crystal-clear cabin windows and interior detail to an abundance of exterior features including LED lights, antennas, vortex generators and riveted panels, the Maule breaks new ground in park flyer-size civilian scale authenticity. EPO construction results in a lightweight yet durable airframe. The two-piece wing is equipped with operational flaps for outstanding slow flight performance and STOL capabilities. The factory-installed 3S and 4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or when flying from water using the included float set.

AS3X Receiver with Optional SAFE Select Technology
This Bind-N-Fly® Basic model features a Spektrum receiver integrated with AS3X® (Artificial Stabilization – 3-aXis) technology to smooth out the effects of wind and turbulence for the remarkable sense of stability and precision larger, expertly tuned aircraft enjoy.

If this is your first scale model or would like an extra margin of safety while getting familiar with the airplane, optional SAFE® Select flight protection can be enabled. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select features enabled, you get:

Pitch and Bank Angle Limits
• These keep the aircraft from rolling or pitching upside down. They also prevent excessive climb or dive angles during takeoff and landing.

Automatic Self-Leveling
• Instantly returns the wings to level when the sticks are released.

Easy Switch Assignment-No Programming Required
• The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any programming and takes just a few seconds.

Authentic Detail
As an officially licensed replica, this scale model features clear windows and interior detail including a pilot figure, plus complements to the scale outline including antennas, molded panel lines, rivets, vortex generators and functional LED lights.

Convenient Access
You get direct access through a front top-hatch that makes flight battery changes simple and convenient when using a 3–4S LiPo pack from 2200–3200mAh. A concealed hatch in the bottom offers easy access to the receiver resulting in a scale appearance that’s more authentic.

Versatile Brushless Power
The factory-installed power system features a high-power brushless outrunner motor and ESC that’s versatile enough to run either a 3S or 4S LiPo battery (sold separately). Either way, you enjoy thrust that hauls this Maule into the air with ease.

Easy to Assemble
No glue is required to complete assembly. The wing features a two-piece, plug-in design with folding struts that makes transport and storage convenient. The horizontal stabs slide into place and are secured with screws so assembly is quick and easy.

Functional Flaps
Like the full-size counterpart, the factory-installed flaps provide aerodynamic braking when deflected and increase lift substantially for stable slow-speed flight and remarkable STOL performance.

Floats Included
The included float set features a water rudder for superb steering control. The custom strut package ensures accurate alignment so that setup to fly from water is a breeze.

E-flite Maule M-7 1.5m PNP

$249.99ITEM: EFL5375

EARN 250 REWARDS POINTS ON THIS ITEM

While America geared up to go higher and faster, B.D. Maule was hard at work in a quiet country corner developing his vision of an aircraft that would give pilots the ability to do the exact opposite—practically. Maule Air Inc. has flourished ever since by delivering planes around the globe with renowned STOL capability and value. The E-flite® Maule M-7 1.5m park flyer is an officially licensed tribute to the full-size marvel that includes an abundance of scale detail, rugged landing gear, flaps and an optional-use float set so you can conquer any terrain year-round.

The E-flite® Maule M-7 1.5m captures the Short Take Off and Landing (STOL) capabilities, along with the unmistakable lines and character of the rugged full-scale design series. From the crystal-clear cabin windows and interior detail to an abundance of exterior features including LED lights, antennas, vortex generators and riveted panels, the Maule breaks new ground in park flyer-size civilian scale authenticity. EPO construction results in a lightweight yet durable airframe. The two-piece wing is equipped with operational flaps for outstanding slow flight performance and STOL capabilities. The factory-installed 3S and 4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or when flying from water using the included float set.

Authentic Detail
As an officially licensed replica, this scale model features clear windows and interior detail including a pilot figure, plus complements to the scale outline including antennas, molded panel lines, rivets, vortex generators and functional LED lights.

Convenient Access
You get direct access through a front top-hatch that makes flight battery changes simple and convenient when using a 3–4S LiPo pack from 2200–3200mAh. A concealed hatch in the bottom offers easy access to the receiver resulting in a scale appearance that’s more authentic.

Versatile Brushless Power
The factory-installed power system features a high-power brushless outrunner motor and ESC that’s versatile enough to run either a 3S or 4S LiPo battery (sold separately). Either way, you enjoy thrust that hauls this Maule into the air with ease.

Easy to Assemble
No glue is required to complete assembly. The wing features a two-piece, plug-in design with folding struts that makes transport and storage convenient. The horizontal stabs slide into place and are secured with screws so assembly is quick and easy.

Functional Flaps
Like the full-size counterpart, the factory-installed flaps provide aerodynamic braking when deflected and increase lift substantially for stable slow-speed flight and remarkable STOL performance.

Floats Included
The included float set features a water rudder for superb steering control. The custom strut package ensures accurate alignment so that setup to fly from water is a breeze.

E-flite F-27 Evolution Bind-N-Fly Basic Electric Airplane w/AS3X & SAFE Technology

$149.99ITEM: EFL5650

EARN 180 REWARDS POINTS ON THIS ITEM

The original F-27 models, like the Stryker, introduced thousands of RC pilots to the fun of flying a durable and high-performance aircraft that harnessed the advantages of a flying wing design, evolutionary materials, advanced electronics and modern aerodynamics. The E-flite® F-27 Evolution™ airplane marks the times by combining a proven design with modern updates, including a significant boost in power, removable wings and a sleek FPV option that have it destined to be a new favorite well into the future and beyond.

The E-flite® F-27 Evolution™ lets you use 3S or 4S LiPo batteries to rip through the skies like a jet at ballistic speeds of 105mph (up to 85mph on 3S), or to slow down and cruise with the low-speed predictability of a sport model, all in the same flight. The wide performance envelope also allows you enjoy everything from blinding roll rates and tight loops to using full up elevator for slow, high-alpha flying and to practically ‘elevator’ to the ground. Utilizing a highly refined airfoil, the F-27 Evolution also features oversized elevons driven by metal-geared servos and a lightweight yet durable EPO airframe that’s reinforced to provide both strength and agility. Plus, its updated three-piece design allows you to quickly break it down for transport and storage without the need for tools or fasteners. You can even put yourself in the pilot seat by replacing the stock twist-lock nose with an optional nose that contains an FPV camera and video transmitter (VTX) while blending perfectly with the sleek outline. So whether this is your first flying wing experience or the F-27 reunion you’ve been waiting for, the Evolution is sure to thrill like no other can, and at a value that simply can’t be beat.

Features:
• The evolution and return of an all-time favorite
• High-Power 3–4S LiPo compatible brushless motor and ESC
• Stability and precision of AS3X® technology
• Optional SAFE® Select flight envelope protection
• Removable wing design for easy transport and storage
• Oversized elevons for maximum roll and pitch authority
• Optional nose includes FPV camera and VTX (EFL5608 sold separately)
• Lightweight and durable EPO foam construction
• Large top hatch simplifies battery changes
• Digital, metal-geared servos installed
• Spektrum™ 6-channel receiver with industry-leading DSMX® technology
• Speeds up to 85mph on 3S and 105mph on 4S

Durable Design: Oversized elevons are controlled with digital metal-geared servos that offer precise control and unmatched durability. The aerodynamically efficient design features composite reinforcement throughout its lightweight EPO structure to provide a rigid airframe that’s durable and has low wing loading.

Ballistic Power: The robust brushless power system delivers great performance and speeds of up to 85mph when flown on a 3S LiPo battery, or you can install a 4S battery for outstanding acceleration, beyond unlimited vertical performance and straight-line speeds of 105mph.

Three-Piece Airframe: At just under 40-inches in span, the F-27 Evolution is easy to keep together, or take apart for storage and transport that’s more compact than any flying wing it its class. The wings are supported by carbon fiber tubes and connect to the center section using a unique attachment system that secures them without the need for tools or fasteners.

FPV Ready: The stock twist-lock attached nose can be quickly replaced with an optional nose (EFL5608 sold separately) containing an integrated FPV camera and video transmitter (VTX) that blends perfectly into the sleek outline and easily connects to the factory-installed wiring harness.

AS3X Receiver with Optional SAFE Select Technology: This Bind-N-Fly® Basic model is equipped with an AS3X® (Artificial Stabilization – 3-aXis) receiver that works behind the scenes to smooth out the effects of wind and turbulence. The result is a sense of stability and precision that makes you feel like you’re flying a larger and expertly tuned aircraft.

E-flite F-27 Evolution Plug-N-Play Basic Electric Airplane

$129.99ITEM: EFL5675

EARN 150 REWARDS POINTS ON THIS ITEM

The original F-27 models, like the Stryker, introduced thousands of RC pilots to the fun of flying a durable and high-performance aircraft that harnessed the advantages of a flying wing design, evolutionary materials, advanced electronics and modern aerodynamics. The E-flite® F-27 Evolution™ airplane marks the times by combining a proven design with modern updates, including a significant boost in power, removable wings and a sleek FPV option that have it destined to be a new favorite well into the future and beyond.

The E-flite® F-27 Evolution™ lets you use 3S or 4S LiPo batteries to rip through the skies like a jet at ballistic speeds of 105mph (up to 85mph on 3S), or to slow down and cruise with the low-speed predictability of a sport model, all in the same flight. The wide performance envelope also allows you enjoy everything from blinding roll rates and tight loops to using full up elevator for slow, high-alpha flying and to practically ‘elevator’ to the ground. Utilizing a highly refined airfoil, the F-27 Evolution also features oversized elevons driven by metal-geared servos and a lightweight yet durable EPO airframe that’s reinforced to provide both strength and agility. Plus, its updated three-piece design allows you to quickly break it down for transport and storage without the need for tools or fasteners. You can even put yourself in the pilot seat by replacing the stock twist-lock nose with an optional nose that contains an FPV camera and video transmitter (VTX) while blending perfectly with the sleek outline. So whether this is your first flying wing experience or the F-27 reunion you’ve been waiting for, the Evolution is sure to thrill like no other can, and at a value that simply can’t be beat.

Features:
• The evolution and return of an all-time favorite
• High-Power 3–4S LiPo compatible brushless motor and ESC
• Removable wing design for easy transport and storage
• Oversized elevons for maximum roll and pitch authority
• Optional nose includes FPV camera and VTX (EFL5608 sold separately)
• Lightweight and durable EPO foam construction
• Large top hatch simplifies battery changes
• Digital, metal-geared servos installed
• Speeds up to 85mph on 3S and 105mph on 4S

Durable Design: Oversized elevons are controlled with digital metal-geared servos that offer precise control and unmatched durability. The aerodynamically efficient design features composite reinforcement throughout its lightweight EPO structure to provide a rigid airframe that’s durable and has low wing loading.

Ballistic Power: The robust brushless power system delivers great performance and speeds of up to 85mph when flown on a 3S LiPo battery, or you can install a 4S battery for outstanding acceleration, beyond unlimited vertical performance and straight-line speeds of 105mph.

Three-Piece Airframe: At just under 40-inches in span, the F-27 Evolution is easy to keep together, or take apart for storage and transport that’s more compact than any flying wing it its class. The wings are supported by carbon fiber tubes and connect to the center section using a unique attachment system that secures them without the need for tools or fasteners.

FPV Ready: The stock twist-lock attached nose can be quickly replaced with an optional nose (EFL5608 sold separately) containing an integrated FPV camera and video transmitter (VTX) that blends perfectly into the sleek outline and easily connects to the factory-installed wiring harness.

Plug-N-Play: This Plug-N-Play model comes with the motor, ESC and servos installed. All you need to do is finish some final assembly, install a receiver, charge a battery and fly.

E-flite EC-1500 Twin 1.5m BNF Basic with AS3X and SAFE Select

$399.99ITEM: EFL5750

The E-flite EC-1500 Twin is a groundbreaking design that offers a unique flight experience for a wide range of pilots. This twin/multi-motor model carries echoes of full-scale civil and military cargo transport aircraft, but it has an incredible range of capabilities and options that no other RC airplane can match. Featuring 3S and 4S compatible power systems with custom 5-blade counter-rotating props, the EC-1500's flight envelope encompasses everything from slow and scale-like, to sport flying and even aggressive 3D aerobatic capabilities! You can fly from paved, grass and dirt surfaces; from snow with the included optional-use skis; or from water using the optional float set (sold separately). It also includes factory-installed LED lights, a functional cargo door, plus decals to customize the finish with Air Force, Army, Coast Guard, Marines, Navy and other markings.

E-Flite Cargo 1500 EC-1500 BNF B

$399.99ITEM: EFL5750

THE MOST CAPABLE AND VERSATILE TWIN EVER!

The E-flite® EC-1500 Twin features an all-new, ground-up design optimized for capability, versatility and FUN to deliver a flying experience you simply can't get with any other airplane! It's effectively many airplanes in one, with a wide flight envelope that includes slow and scale-like, to sport flying and even aggressive 3D aerobatic capability.

The twin power systems feature brushless outrunner motors, robust ESCs, and custom five-blade counter-rotating propellers. This setup delivers excellent performance with a 3S 3200–6400mAh LiPo battery, or you can install a 4S battery for the power to hover and unlimited vertical capability — without modifications or upgrades! There are eight factory-installed servos, including one to operate the functional cargo door so you can carry and drop creative payloads from the large cargo bay. Realistic looking LED landing, navigation and simulated strobe lights are powered from the flight battery so you can fly from dawn until dusk — from paved, grass, or dirt surfaces; off snow using the included skis; or from large ponds or lakes using optional floats (sold separately).

Remove the magnetically secured nose cone to install a GoPro® or similar camera for recording aerial HD footage, or mount a separate FPV camera on the large top hatch (cameras and camera gear sold separately). Plus you can use the included decals to customize the scale-inspired trim scheme with Air Force, Army, Coast Guard, Marines, Navy and other markings to personalize your model.

E-flite ICON A5 1.3m BNF Basic w/ AS3X

$199.99ITEM: EFL5850

EARN 200 REWARDS POINTS ON THIS ITEM

Like its full-scale inspiration, the E-flite® ICON A5 park flyer makes it easy to discover the thrill of amphibious flight. This Bind-N-Fly® version comes equipped with a powerful brushless motor and the smooth, stable response of a Spektrum™ AS3X® receiver. If you're a relatively new RC pilot, you have the option of activating the receiver’s built-in SAFE® Select technology that limits pitch and bank angles so you don’t accidentally put the model in an unrecoverable attitude during your first few flights. It will also return the wings to level whenever the sticks are released.

Key Features
• Fast assembly
• Officially licensed by ICON Aircraft
• Spektrum AS3X® receiver with optional SAFE® Select technology
• Integrated hull with removable landing gear
• Detailed cockpit with pilot figure
• Durable Z-Foam airframe
• Factory-installed brushless motor, ESC and servos
• Optional nose light set (sold separately)

Officially Licensed by ICON Aircraft
The officially licensed airframe and trim scheme are based that of the full-scale aircraft so you can enjoy the most realistic experience possible.

AS3X® Receiver with Optional SAFE6® Select Technology
The model’s AS3X (Artificial Stabilization – 3-aXis) receiver works behind the scenes to smooth out the effects of wind and turbulence so you enjoy a sense of stability and precision that makes you feel like you’re flying a larger, expertly tuned aircraft.

If you’re new to flying off the water or want an extra margin of safety while familiarizing yourself with the airplane, you have the option of enabling SAFE Select features like self-leveling and angle limits. No programming is required. All you do is change up the binding sequence as directed in the manual. Once enabled, you can assign a transmitter switch to turn the SAFE Select features on and off when you want.

If you don’t want to enable the SAFE Select technology, just bind the receiver normally and it will function like a standard AS3X receiver. You can even fine-tune its AS3X settings if you have the Spektrum programming interface and a compatible programming cable (both available separately).

Integrated Hull with Removable Landing Gear
One of the distinguishing features of the ICON A5 is its integrated hull and Seawings design that makes water takeoffs and landings remarkably easy. The model’s hull has been designed so that it not only looks realistic but provides the same pilot-friendly handling on the water as the full-scale version. If there’s no water around but you have a suitable patch of pavement, bolt-on landing gear with a steerable nose wheel is included so you can fly almost anywhere.

Big Battery Hatch with Cockpit Details
The entire cockpit section is magnetically secured and easily removed for unfettered access to the model’s spacious battery compartment. The cockpit itself boasts a tinted windshield, painted pilot figure, seatbacks and an instrument panel.

Durable Z-Foam™ Airframe
The airframe is constructed of tough Z-Foam material that is inherently water resistant and can handle the demands of amphibious flying.

E-flite ICON A5 1.3m PNP

$199.99ITEM: EFL5875

EARN 200 REWARDS POINTS ON THIS ITEM

Like its full-scale inspiration, the E-flite® ICON A5 park flyer makes it easy to discover the thrill of amphibious flight. This Plug-N-Play version comes with a powerful brushless motor, ESC and servos installed. All that's left for you to do is complete a little final assembly, install the receiver, charge a battery and fly!

Key Features
• Fast assembly
• Officially licensed by ICON Aircraft
• Integrated hull with removable landing gear
• Detailed cockpit with pilot figure
• Durable Z-Foam airframe
• Factory-installed brushless motor, ESC and servos
• Optional nose light set (sold separately)

Officially Licensed by ICON Aircraft
The officially licensed airframe and trim scheme are based that of the full-scale aircraft so you can enjoy the most realistic experience possible.

Integrated Hull with Removable Landing Gear
One of the distinguishing features of the ICON A5 is its integrated hull and Seawings design that makes water takeoffs and landings remarkably easy. The model’s hull has been designed so that it not only looks realistic but provides the same pilot-friendly handling on the water as the full-scale version. If there’s no water around but you have a suitable patch of pavement, bolt-on landing gear with a steerable nose wheel is included so you can fly almost anywhere.

Big Battery Hatch with Cockpit Details
The entire cockpit section is magnetically secured and easily removed for unfettered access to the model’s spacious battery compartment. The cockpit itself boasts a tinted windshield, painted pilot figure, seatbacks and an instrument panel.

Durable Z-Foam™ Airframe
The airframe is constructed of tough Z-Foam material that is inherently water resistant and can handle the demands of amphibious flying.

E-flite Cirrus SR22T 1.5m BNF Basic

$229.99ITEM: EFL5950

EARN 230 REWARDS POINTS ON THIS ITEM

The E-flite Cirrus SR-22T 1.5m Bind-N-Fly Basic Electric Airplane celebrates the general aviation marvel with a scale model that’s easy to appreciate and fun to fly. Like the full-scale airplane, this officially licensed replica is generously appointed with features that will get you in the air and flying in style. The two-piece, plug-in wing is equipped with slotted flaps, lights and a convenient Hands-Free Servo Connection System. Functional interior cabin and exterior navigation LED lighting combine with its modern trim scheme for authenticity that's easy to appreciate from any angle. Rugged tricycle landing gear and steerable nose gear utilize over-size wheels to make takeoffs and landings on grass fields or paved surfaces seem effortless while matching fairings and wheel pants complete the luxurious outline. Tinted cabin windows, a pilot figure and detailed cockpit take the scale experience even deeper. Plus, the powerful brushless motor and three-blade propeller deliver plenty of power to perform scale maneuvers and sport aerobatics with ease.

Features:
• An officially licensed replica with sporty performance
• Stability and precision of AS3X® technology
• Brilliant full-scale inspired paint scheme and graphics
• Cockpit detail includes a pilot figure and tinted cabin windows
• Operational slotted-flaps and scale control surface hinging
• Optional SAFE® Select flight mode flexibility
• Lightweight and durable EPO foam construction
• Large, magnetic top hatch simplifies battery changes
• Functional interior cabin and exterior navigation LED lighting
• Hands-free wing servo connection system
• Two-piece, plug-in wings and stabilizers
• Fuselage-mounted landing gear for easy assembly and transport
• Spektrum™ 6-channel receiver with industry-leading DSMX® technology
• Powerful 10-size brushless motor and 40A ESC installed
• Steerable nose wheel and aluminum main gear with wheel pants
• Matching three-blade spinner and scale propeller
• Five-channel control with 6 micro servos installed
• Designed for use with 3S 2200–3000mAh 11.1V LiPo packs

E-flite Adagio 280 1.4m BNF Basic w/ AS3X

$129.99ITEM: EFL6550

EARN 130 REWARDS POINTS ON THIS ITEM

The E-flite® Adagio™ 280 motor glider is the park-size solution for pilots who want a great soaring experience and the versatility of a sport airplane. Its sleek, high-aspect ratio wing and flowing fuselage offer the ability to slip cleanly through the air and connect with thermal activity. When the air doesn’t deliver the lift you want, just add throttle and the high-torque outrunner motor whips the folding prop to life. Enjoy zooming performance that will take you to the prevailing winds, or perform basic aerobatics with grace and precision. With working flaps at your command, it’s possible to improve lift for takeoff or create drag to pin-point land with ease. Best of all, this exciting park-size motor glider features advanced AS3X® (Artificial Stabilization - 3-aXis) technology that works behind the scenes to smooth out the effects of forces like P-factor, turbulence and torque. Instead of a park flyer, you’ll feel like you’re at the controls of an expertly tuned, giant-scale model that flies like it’s on rails. You can have this Bind-N-Fly® Basic model flying in the time it takes to charge your battery and bind its receiver to your 5+ channel DSM2®/DSMX® aircraft transmitter.

Key Features
• Easy to complete final assembly
• Carbon fiber reinforced, Z-Foam™ construction
• Two-piece, removable plug-in wing
• AS3X® system provides great handling with rock-solid stability
• Potent BL280, 1260Kv direct-drive outrunner motor installed
• High-speed digital servos and Spektrum™ Nanolite receiver installed
• High-efficiency folding propeller
• 5-Channel control with flaps for aerobatic maneuverability and spot landings
• Ready for your 6-channel DSM2®/DSMX® transmitter and 3S Li-Po battery
• Vibrant, easy-to-see modern scheme

Convenient Design
The 280-size design means that you can soar at smaller fields. Its two-piece wing allows for easy transport because the model breaks down into a small package. And because it’s a motor-glider, there’s no need for a Hi-start or a tow line.

Innovative Technology
Advanced AS3X® technology built into the pre-installed Spektrum™ AR6335 receiver has been programmed to help stabilize the airplane in turbulence. The result is the kind of control feel and performance you’d expect from a motor-glider many times larger.

Five Channel Control
Traditional four-channel maneuverability plus working flaps delivers more precise glide path control and allows for landing in a smaller area. The E-flite® 3.5-gram servos installed feature digital precision and amazing authority.

Aerobatic Maneuverability
The airframe design is optimized for high-lift and aerobatic capability. With the powerful ailerons, effective rudder and potent outrunner motor, the Adagio™ 280 motor glider feels right at home doing graceful aerobatics or searching for thermals.

E-flite P-51D Mustang 1.1m PNP

$219.99ITEM: EFL6775

EARN 220 REWARDS POINTS ON THIS ITEM

The North American P-51D Mustang used during WWII was a game changer. Its abilities gave pilots a formidable advantage and the inspiration to go beyond mission objectives in addition to fulfilling their "Ace" potential. The new E-flite® P-51D Mustang is an electric-powered model that brings the ultimate warbird experience to your local park. Electric retracts and functional flaps are already installed so you can experience a well-equipped warbird right away. Every angle of the airframe is saturated with extensive detail that’s built upon the most accurate outline possible. Lightweight Z-Foam™ construction is combined with composite reinforcement so that flight performance is as forgiving as it is thrilling. Besides its authentic color scheme, the bounty of features included on this Mustang allow this thoroughbred outrun all others. That’s because every feature has been hand-selected by Horizon Hobby experts whose ultimate priority is to deliver a great flying warbird.

Key Features
• Minimal assembly required
• Operational flaps, installed
• Retractable electric main landing gear, installed
• Full control of ailerons, elevator, rudder and throttle
• Potent 15-size brushless, 950Kv outrunner, installed
• 4-blade propeller, panel line, pilot, gun and cockpit details
• Easy-access battery hatch and bolt-on wing
• Durable Z-Foam™ construction

Electric Retracts
The installed main landing gear feature reliable electric retraction with covers over the steel struts that enhance the scale appearance along with the outer gear doors.

Functional Flaps
The light wing loading of this Mustang, plus operational flaps, gives this warbird a significantly greater flight envelope with the ability to takeoff in shorter distances and land more slowly.

4-Blade Propeller
The specially engineered 4-blade propeller delivers an appearance on the flight line that’s just as impressive as its performance in the air.

Authentic Appearance
Durable Z-Foam™ construction provides the ability to replicate complex airframe detail with greater accuracy.

As a value packed Plug-N-Play® E-flite RC replica you can enjoy air superiority very quickly. Final assembly is minimal once you choose your favorite full-range, 6-channel radio, a recommended 2200mAh 11.1V 3S 25C Li-Po battery and a compatible Li-Po balance charger. If the most outstanding warbird experience in the park is your mission, be sure to choose the recommended Spektrum™ 6-Channel AS3X® Sport receiver-sold separately.  

E-flite P-47D Thunderbolt 1.1m BNF Basic w/ AS3X

$239.99ITEM: EFL6850

EARN 240 REWARDS POINTS ON THIS ITEM

The Republic P-47D multi-role fighter is impressive with an outstanding service record. A massive radial engine gave the power to deliver a variety of weapons against air and ground targets. Wide landing gear allowed it to excel regardless of field conditions, while its rugged design proved that pilots could return home even after absorbing heavy fire.

Get the warbird experience you crave with the E-flite® P-47D Thunderbolt. This aircraft comes out of the box fully equipped with operational flaps and retracts already installed. Z-Foam™ material not only makes this fighter tough, but also lightweight, even with all the scale detail. The way it flies separates this warbird apart from others in its class.

The advanced AS3X® (Artificial Stabilization – 3-aXis) system built into the Spektrum™ 6-channel AR636A receiver is what helps give the E-flite® P-47D Thunderbolt Bind-N-Fly version an incredibly solid look and feel in the air. It’s technology that works behind the scenes to help counter the effects of wind and turbulence by combining 3-axis sensing with exclusively tuned flight control software. As a result, your workload to fly smoothly is significantly reduced so you can perform every maneuver with greater accuracy. It’s a flight experience you get in the convenience of park spaces, but will have you feeling like you’re at the controls of an expertly tuned fighter that’s much larger.

You can enjoy air superiority in no time at all with this Bind-N-Fly Basic model. Final assembly is minimal and can be complete in about the time it takes to charge your battery. Once bound to your DSM2®/DSMX® compatible transmitter, an outstanding warbird experience is just a park away.

Key Features
• AS3X technology delivers rock-solid stability and great handling
• Operational flaps with individual servos (installed)
• Retractable electric main landing gear, installed
• Spektrum 6-channel AR636A DSMX® receiver, installed
• 6-channel control with servos, installed
• Brushless, 15-size outrunner and 30A ESC, installed
• 4-blade propeller and scale spinner hub
• Clear canopy and detailed cockpit with pilot figure
• Dummy engine, gear door, machine gun and panel line detail
• Factory applied graphics with authentic WWII markings
• Easy-access battery hatch and bolt-on wing
• Constructed of durable Z-Foam™ material

Electric Retracts
The installed main landing gear feature reliable electric retraction with covers over the steel struts that enhance the scale appearance along with the outer gear doors.

Functional Flaps
Operational flaps give this warbird a significantly greater flight envelope with the ability to takeoff in shorter distances and land more slowly.

4-Blade Propeller
The specially engineered 4-blade propeller delivers an appearance on the flight line that’s just as impressive as its performance in the air.

Strong and Light
Durable Z-Foam™ material provides the ability to replicate complex airframe detail with greater accuracy while delivering a very light flying weight.

  

E-flite P-47D Thunderbolt PNP

$214.99ITEM: EFL6875

EARN 215 REWARDS POINTS ON THIS ITEM

The Republic P-47D multi-role fighter is impressive with an outstanding service record. A massive radial engine gave the power to deliver a variety of weapons against air and ground targets. Wide landing gear allowed it to excel regardless of field conditions, while its rugged design proved that pilots could return home even after absorbing heavy fire.

Get the warbird experience you crave with the E-flite® P-47D Thunderbolt. This aircraft comes out of the box fully equipped with operational flaps and retracts already installed. Z-Foam™ material not only makes this fighter tough, but also lightweight, even with all the scale detail. The way it flies separates this warbird apart from others in its class.

You can enjoy air superiority in no time at all with this Plug-N-Play® model. All you need to start flying today is your favorite full range 6+ channel programmable aircraft transmitter, a 6-channel receiver and a charged 2200mAh 3S 11.1V 25C Li-Po battery (EFLB22003S30–sold separately).

Key Features
• Operational flaps with individual servos (installed)
• Retractable electric main landing gear, installed
• 6-channel control with servos, installed
• 4-blade propeller and scale spinner hub
• Clear canopy and detailed cockpit with pilot figure
• Dummy engine, gear door, machine gun and panel line detail
• Factory applied graphics with authentic WWII markings
• Brushless, 15-size outrunner and 30A ESC, installed
• Easy-access battery hatch and bolt-on wing
• Constructed of durable Z-Foam™ material
• Easy to complete final assembly

Electric Retracts
The installed main landing gear feature reliable electric retraction with covers over the steel struts that enhance the scale appearance along with the outer gear doors.

Functional Flaps
Operational flaps give this warbird a significantly greater flight envelope with the ability to takeoff in shorter distances and land more slowly.

4-Blade Propeller
The specially engineered 4-blade propeller delivers an appearance on the flight line that’s just as impressive as its performance in the air.

Strong and Light
Durable Z-Foam™ material provides the ability to replicate complex airframe detail with greater accuracy while delivering a very light flying weight.

  

E-flite Brave Night Flyer 1.2m BNF Basic w/ AS3X

$179.99ITEM: EFL6950

EARN 180 REWARDS POINTS ON THIS ITEM

The E-flite® Pawnee Brave Night Flyer is a scale park flyer for the intermediate pilot who wants a nimble airplane that can be flown practically any time of day. Like a respectable crop duster should, this scale-inspired design packs plenty of power under the hood. Besides four-channel control and a steerable tail wheel, working NAV lights add a touch of realism that make getting up early for flights at dawn more than tempting. Even more vibrant is the hollow-core structure that’s been filled with a pushbutton controlled, LED lighting system so that it’s practically impossible to lose this model in the dark. In addition, finely-tuned AS3X® technology adds the kind of stability that makes dusting the ground low-and-slow pure joy.

The Scale Delight You Can Fly at Night
The agriculture business attracts a wide range of pilots all wanting to make screaming down on the deck and between power lines a seasonal job. Dedicated crop duster designs truly put the needs of the pilot in the forefront with features like protective cockpits and gobs of power to make tight turns safe. Happening upon a crop duster in action over a lush field of grain is equivalent to an impromptu air show complete with low passes and graceful arcing turns. The E-flite® Pawnee Brave Night Flyer model allows RC pilots to dart across the field just like the real thing, day or night.

Like a respectable crop duster should, this scale-inspired design packs plenty of power under the hood. Besides four-channel control and a steerable tail wheel, working NAV lights add a touch of realism that make getting up early for flights at dawn more than tempting. Even more vibrant is the hollow-core structure that’s been filled with an LED lighting system so that it’s practically impossible to lose this model in the dark. In addition, finely-tuned AS3X® technology adds the kind of stability that makes dusting the ground low-and-slow pure joy. And if you want to slow down even further, you have the option to make the built-in flaps operational by simply adding two servos.

Technology that makes flying more satisfying
The advanced AS3X® (Artificial Stabilization – 3-aXis) system built into the Spektrum™ 6-channel AR636A receiver is what helps give the E-flite® Pawnee Brave Night Flyer an incredibly solid look and feel in the air. It works behind the scenes to help counter the effects of wind and turbulence by combining 3-axis sensing with specially tuned flight control software. As a result, a nimble crop-duster like the Pawnee Brave is made even better because your workload to fly smoothly is significantly reduced.

Internal LEDs
The hollow-core structure of the Z-Foam material has been filled with white LED lights. Just press the button inside the battery compartment and the entire airframe will brilliantly glow in the dark.

External NAV Lighting
Inspired by the full-scale, external navigation lights on the wing tips, plus the landing light recessed into the wing lead edge offer an addition sense of flight orientation.

Optional Flaps
You can add a higher level of scale performance by making the built-in flaps functional. All the hardware has been provided to suit the addition of two micro servos required.

E-flite NIGHTvisionaire BNF Basic

$249.99ITEM: EFL7150

The E-flite NIGHT VisionAire park flyer is specifically designed for sport pilots who want a 3D experience with more options. Based on the groundbreaking ParkZone VisionAire design, the E-flite NIGHT VisionAire aerobat includes intense LED lights that give the internal structure a brilliant glow. But giving you more time to fly isn't the only thing visionary about it. The included Spektrum AR636A receiver has been specially tuned with an AS3X system featuring a Precision mode and a 3D mode for an exceptional high-speed and 3D aerobatic experience. Not only are stunning moves even more fun to fly, if you get into trouble, SAFE technology provides Panic Recovery mode so there's less risk of crashing.  Whether you're an intermediate park pilot looking to advance your aerobatic skills or a 3D expert who wants the versatility to fly day or night, the E-flite NIGHT VisionAire park flyer is ideal. All you need to start flying today is your favorite full-range 4+ channel programmable aircraft transmitter with Spektrum 2.4GHz DSM2/DSMX technology and a charged 2200mAh 11.1V 3S 30C Li-Po battery.

E-flite NIGHTvisionaire BNF Basic

$249.99ITEM: EFL7150

The E-flite NIGHT VisionAire park flyer is specifically designed for sport pilots who want a 3D experience with more options. Based on the groundbreaking ParkZone VisionAire design, the E-flite NIGHT VisionAire aerobat includes intense LED lights that give the internal structure a brilliant glow. But giving you more time to fly isn't the only thing visionary about it. The included Spektrum AR636A receiver has been specially tuned with an AS3X system featuring a Precision mode and a 3D mode for an exceptional high-speed and 3D aerobatic experience. Not only are stunning moves even more fun to fly, if you get into trouble, SAFE technology provides Panic Recovery mode so there's less risk of crashing.  Whether you're an intermediate park pilot looking to advance your aerobatic skills or a 3D expert who wants the versatility to fly day or night, the E-flite NIGHT VisionAire park flyer is ideal. All you need to start flying today is your favorite full-range 4+ channel programmable aircraft transmitter with Spektrum 2.4GHz DSM2/DSMX technology and a charged 2200mAh 11.1V 3S 30C Li-Po battery.

E-flite NIGHTvisionaire BNF Basic

$249.99ITEM: EFL7150

The E-flite NIGHT VisionAire park flyer is specifically designed for sport pilots who want a 3D experience with more options. Based on the groundbreaking ParkZone VisionAire design, the E-flite NIGHT VisionAire aerobat includes intense LED lights that give the internal structure a brilliant glow. But giving you more time to fly isn't the only thing visionary about it. The included Spektrum AR636A receiver has been specially tuned with an AS3X system featuring a Precision mode and a 3D mode for an exceptional high-speed and 3D aerobatic experience. Not only are stunning moves even more fun to fly, if you get into trouble, SAFE technology provides Panic Recovery mode so there's less risk of crashing.  Whether you're an intermediate park pilot looking to advance your aerobatic skills or a 3D expert who wants the versatility to fly day or night, the E-flite NIGHT VisionAire park flyer is ideal. All you need to start flying today is your favorite full-range 4+ channel programmable aircraft transmitter with Spektrum 2.4GHz DSM2/DSMX technology and a charged 2200mAh 11.1V 3S 30C Li-Po battery.

E-flite NIGHTvisionaire BNF Basic

$249.99ITEM: EFL7150

The E-flite NIGHT VisionAire park flyer is specifically designed for sport pilots who want a 3D experience with more options. Based on the groundbreaking ParkZone VisionAire design, the E-flite NIGHT VisionAire aerobat includes intense LED lights that give the internal structure a brilliant glow. But giving you more time to fly isn't the only thing visionary about it. The included Spektrum AR636A receiver has been specially tuned with an AS3X system featuring a Precision mode and a 3D mode for an exceptional high-speed and 3D aerobatic experience. Not only are stunning moves even more fun to fly, if you get into trouble, SAFE technology provides Panic Recovery mode so there's less risk of crashing.  Whether you're an intermediate park pilot looking to advance your aerobatic skills or a 3D expert who wants the versatility to fly day or night, the E-flite NIGHT VisionAire park flyer is ideal. All you need to start flying today is your favorite full-range 4+ channel programmable aircraft transmitter with Spektrum 2.4GHz DSM2/DSMX technology and a charged 2200mAh 11.1V 3S 30C Li-Po battery.

E-flite NIGHT VisionAire 1.1m BNF Basic w/ SAFE

$249.99ITEM: EFL7150

EARN 250 REWARDS POINTS ON THIS ITEM

Key Features
• SAFE® technology provides Panic Recovery mode so there’s less risk of crashing
• AS3X® system provides Precision and 3D flight modes
• Spektrum AR636A DSMX® 6-channel receiver (installed)
• High-intensity internal LED night lighting system (installed)
• Powerful 10-size, 1250Kv BL outrunner motor (installed)
• E-flite 40A Lite Pro brushless ESC with switch-mode BEC (installed)
• Digital 13-gram micro servos with metal gears (installed)
• Lightweight, carbon-reinforced Z-Foam™ construction
• Advanced aerodynamics including leading-edge vortex generators
• Two-piece, plug-in wing for easy transport and repair
• 3D-size control surfaces with double-beveled hinges
• Durable wire landing gear and large wheels for flying off grass


Versatility with a Virtual Safety Net
The E-flite® NIGHT VisionAire® park flyer is specifically designed for sport pilots who want a 3D experience with more options. Based on the groundbreaking ParkZone® VisionAire design, the E-flite NIGHT VisionAire aerobat includes intense LED lights that give the internal structure a brilliant glow. But giving you more time to fly isn’t the only thing visionary about it. The included Spektrum™ AR636A receiver has been specially tuned with an AS3X® system featuring a Precision mode and a 3D mode for an exceptional high-speed and 3D aerobatic experience. Not only are stunning moves even more fun to fly, if you get into trouble, SAFE® technology provides Panic Recovery mode so there’s less risk of crashing.

Whether you’re an intermediate park pilot looking to advance your aerobatic skills or a 3D expert who wants the versatility to fly day or night, the E-flite NIGHT VisionAire park flyer is ideal. All you need to start flying today is your favorite full-range 4+ channel programmable aircraft transmitter with Spektrum 2.4GHz DSM2®/DSMX® technology and a charged 2200mAh 11.1V 3S 30C Li-Po battery.

Engineered with SAFE® Technology
SAFE (Sensor Assisted Flight Envelope) technology is a revolutionary electronic flight envelope protection system that delivers a virtual safety net. Anytime you need to instantly recover back to level flight, just press the Panic Recovery Mode button or switch on your transmitter.

LED Lights
A brilliant LED lighting system illuminates the internal chambers of the Z-Foam™ structure. Now it’s possible for you to use the calmer weather conditions at night to explore 3D flight.

AR363A Receiver
Beyond the precision of Spektrum™ DSMX® 2.4GHz technology, the AR636A 6-channal receiver has been specially tuned with exclusive features. Built-in AS3X® technology gives you the performance options of flying in Precision or 3D mode, plus SAFE® technology gives you the security of instantaneous Panic Recovery mode capability.

Brushless Motor
A high-output power system delivers the awesome vertical performance you need to perform 3D maneuvers with ease. It includes a 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2) which cleanly channels power from the recommended 3S Li-Po battery.

Digital Servos and 3D Size Surfaces
The four E-flite® 13-gram micro digital servos deliver a high rate of travel and great holding power to the 3D-sized control surfaces. Metal output gears deliver an added level durability.

Advanced Aerodynamics
Vortex generators on the leading edges of the wing offer maneuverability at slow speeds and high angles of attack, giving you more control. The advanced dual-thickness airfoil and extended chord length of the aileron at the tips also increases slow speed stability.

Easy Access and Assembly
The two-piece, carbon fiber reinforced plug-in wings make transportation and assembly more convenient. A large top access hatch makes installation of the recommended E-flite 2200mAh 3S 11.1V 30C Li-Po (EFLB22003S30, sold separately) flight battery quick.

E-flite V900 BNF Basic 900mm

$179.99ITEM: EFL7450

EARN 180 REWARDS POINTS ON THIS ITEM

The V900™ high-speed sport airplane is the fastest prop-driven E-flite® airplane yet! Right out of the box it can reach top speeds of 120+ MPH on 4S, and even 100+ MPH on 3S, without the need for upgrades or prop changes. It’s designed to whip heads by flying fast and looking good with slick aerodynamics, composite reinforced EPO construction and a vibrant trim scheme that stands out on the ground and in the air.

If you have a need for speed—adrenalin pumping, righteous SPEED—then you’re going to love the E-flite® V900 airplane. The factory-installed high-power brushless motor and 60-amp ESC deliver unlimited vertical performance and incredible top speeds up to 120+ MPH without the need for upgrades or modifications. The lightweight yet stiff and durable airframe is equipped with digital, metal-geared servos to offer precision and reliability you’ll appreciate flight after flight. No glue is required for assembly, and you can be flying in just the time it takes to charge a battery. So whether you’re an intermediate pilot and this is your first high-speed airplane, or you’re an experienced speed addict, you can be in the air and flying FAST in almost no time at all. But the V900 airplane doesn’t just fly fast—it’s well-behaved and slows down nicely for smooth approaches and landings, plus it’s capable of aerobatics including huge loops, rolls, knife edge and more.

Versatile Brushless Power
The V900 is factory-equipped with a versatile high-power brushless power system that gives you the option to choose just how fast you want to go. Simply drop in a 3S battery to reach speeds up to 100+ MPH. Or, to go beyond that and reach top speeds up to 120+ MPH, install a 4S battery—no modifications or upgrades are necessary—not even a prop change is required.

Strength and Precision
Speed is nothing without the right balance of strength and precise control. The V900’s stunning and sleek airframe is molded in EPO that’s composite reinforced so it’s stiff and durable, yet is also lightweight. Plus it’s equipped with digital, metal-geared servos that deliver the precise control and reliability you need to enjoy flying FAST flight after flight.

Ease and Simplicity
No glue is required for assembly, and the V900 can be ready to fly in the time it takes to charge a battery. The compact size makes it easy to transport and store, or you can easily install and remove the carbon-fiber reinforced, one-piece wing if needed. The wing also features an integrated and reinforced grip for easier hand launches and added protection when landing.

E-flite HAVOC Xe 80mm EDF Sport Jet BNF BNF Basic

$399.99ITEM: EFL7550

The E-flite HAVOC Xe 80mm EDF has an extremely wide flight envelope that combines with incredible performance and aerobatic capability to make it an excellent choice for experienced and first-time jet pilots alike. At its core is a 6S compatible brushless motor and 100-amp ESC that are matched to a 12-blade fan that works with the expertly engineered and optimized ducting to deliver an abundance of speed, thrust and a turbine-like sound – without the need for “cheater” holes. It’s capable of top speeds up to 140+ MPH and has nearly unlimited vertical performance, plus it can fit batteries from 4000mAh to 8000mAh to deliver unmatched flight times up to an amazing 10-12+ minutes (with corresponding throttle management)!Reliable electric retracts with shock-absorbing, trailing-link struts on the nose and main gear make it possible to easily fly from grass and other surfaces. The large flaps can travel both ways and can be mixed to offer full-span aileron control (with 7+ channel receivers/transmitters) that delivers the fastest roll rate ever seen in a jet. The eight metal-geared servos with ball-link equipped linkages are factory-installed and provide precise control, and the fully-molded EPO airframe is lightweight yet durable. Best of all no glue is required for assembly, and the factory-finished one-piece wing, one-piece stab and fuselage bolt together with just nine screws so final assembly takes almost no time. And it all combines to deliver an elite EDF sport jet experience unlike any other!

131 found, showing page 3 of 6