E-flite Planes

E-flite Plane Parts
 
E-flite Brand Parts
 
112 found, showing page 2 of 5

E-flite PT-17 1.1m BNF Basic w/ AS3X

$229.99ITEM: EFL3350

EARN 230 REWARDS POINTS ON THIS ITEM

Every WWII allied fighter ace got their start somewhere. Chances are, most started off in a PT-17. Simple, tough and made by the thousands, both the U.S. Army and U.S. Navy used the biplane for its admirable ability to help new pilots survive the basics and master the art of flight, all in the shortest amount of time possible. The E-flite® PT-17 1.1m electric park flyer replicates the most iconic trainer of WWII with exquisite detail and the kind of performance that makes scale flying the way it should be—simple, fun and without compromise.

The E-flite PT-17 1.1m has everything you could ask for in a classic biplane. First and foremost is the period-correct 7-cylinder dummy radial engine, complete with intricate ignition and exhaust details. The Navy-inspired trim scheme is highlighted with wing rib and fuselage frame work accented with accessory and paneling detail. Shock-absorbing action of the aluminum struts add functional authenticity you’ll appreciate during touchdowns and rolling over grass. While it’s easy to be overwhelmed by the scale complexity, getting this beauty in the air requires less effort than you might think. Field assembly features a quick-release wing mounting system, which means no tools are required. Even battery installation is simple through the large magnetic top hatch that accommodates a wide range of 3S LiPo batteries. Unlike the modestly equipped full-scale original, a 15-size brushless outrunner motor delivers ample thrust so you can perform sport aerobatics or just cruise the horizon with power to spare.

U.S. Navy Inspired Replica  
The vivid yellow trim scheme was inspired by the initial aircraft delivered to the U.S. Navy around 1942. Designated the N2S, it was identical to the PT-17 flown by the U.S. Army. Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.

Outstanding Realism  
Out of the box, you only need to fasten six screws. At the field, no tools are needed to install the one-piece wings designed with a quick-release system that makes biplane assembly super simple.

Fast Assembly
Out of the box, you only need to fasten six screws. At the field, no tools are needed to install the one-piece wings designed with a quick-release system that makes biplane assembly super simple.

Brushless Power System
The power system features a 15-size brushless, 850Kv outrunner and a 40-amp ESC that when combined with your 2200mAh 3S 25C Li-Po battery delivers outstanding thrust.

Shock-Absorbing Landing Gear
The shock-absorbing action of the aluminum struts coupled to concealed spring-steel wire combines with the large scale wheels to add functional authenticity you’ll appreciate during touchdowns and while rolling over grass.

AS3X Receiver with Optional SAFE Select Technology
The model’s AS3X® (Artificial Stabilization – 3-aXis) receiver works behind the scenes to smooth out the effects of wind and turbulence. The result is a sense of stability and precision that makes you feel like you’re flying an expertly tuned aircraft.

If you’re a relatively new pilot or want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional SAFE® Select technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select features enabled, you get:

Pitch and Bank Angle Limits
These keep the aircraft from rolling or pitching upside down. They also prevent excessive climb or dive angles during takeoff and landing.

Automatic Self-Leveling
Instantly returns the wings to level when the sticks are released.

Easy Switch Assignment—No Programming Required
The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any programming and takes just a few seconds.

If you don’t want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.

Bind-N-Fly® Convenience  
As an E-flite Bind-N-Fly® Basic RC replica, you can enjoy air superiority in no time at all. Final assembly is minimal and can be complete in about the time it takes to charge your battery. Model Presets are also available to make Spektrum DSM2/DSMX transmitter programing even simpler, which means that getting into the air quickly has never been easier.

E-flite PT-17 1.1m PNP

$199.99ITEM: EFL3375

EARN 200 REWARDS POINTS ON THIS ITEM

Every WWII allied fighter ace got their start somewhere. Chances are, most started off in a PT-17. Simple, tough and made by the thousands, both the U.S. Army and U.S. Navy used the biplane for its admirable ability to help new pilots survive the basics and master the art of flight, all in the shortest amount of time possible. The E-flite® PT-17 1.1m electric park flyer replicates the most iconic trainer of WWII with exquisite detail and the kind of performance that makes scale flying the way it should be—simple, fun and without compromise.

The E-flite PT-17 1.1m has everything you could ask for in a classic biplane. First and foremost is the period-correct 7-cylinder dummy radial engine, complete with intricate ignition and exhaust details. The Navy-inspired trim scheme is highlighted with wing rib and fuselage frame work accented with accessory and paneling detail. Shock-absorbing action of the aluminum struts add functional authenticity you’ll appreciate during touchdowns and rolling over grass. While it’s easy to be overwhelmed by the scale complexity, getting this beauty in the air requires less effort than you might think. Field assembly features a quick-release wing mounting system, which means no tools are required. Even battery installation is simple through the large magnetic top hatch that accommodates a wide range of 3S LiPo batteries. Unlike the modestly equipped full-scale original, a 15-size brushless outrunner motor delivers ample thrust so you can perform sport aerobatics or just cruise the horizon with power to spare.

U.S. Navy Inspired Replica  
The vivid yellow trim scheme was inspired by the initial aircraft delivered to the U.S. Navy around 1942. Designated the N2S, it was identical to the PT-17 flown by the U.S. Army.

Outstanding Realism  
Out of the box, you only need to fasten six screws. At the field, no tools are needed to install the one-piece wings designed with a quick-release system that makes biplane assembly super simple.

Fast Assembly
Out of the box, you only need to fasten six screws. At the field, no tools are needed to install the one-piece wings designed with a quick-release system that makes biplane assembly super simple.

Brushless Power System
The power system features a 15-size brushless, 850Kv outrunner and a 40-amp ESC that when combined with your 2200mAh 3S 25C Li-Po battery delivers outstanding thrust.

Durable Construction
Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.

Plug-N-Play® Finish
The Plug-N-Play completion level means that the ideal electric motor system and servos you need to enjoy the full potential of this PT-17 are already installed. All you have to do is perform the final glue-free assembly, and connect your favorite full-range, 4+ channel radio system. In fact, most pilots can have this model flight-ready in the time it takes to install a receiver and charge a battery.

E-flite Timber X 1.2m BNF Basic with Safe Select

$249.99ITEM: EFL3850

EARN 250 REWARDS POINTS ON THIS ITEM

The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly “mild to wild” experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that's capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. It's also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!

Key Features:
•Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
•Enlarged and oversized control surfaces with double-beveled hinge lines
•Six durable and factory-installed high-torque, metal-geared servos
•High-power 3S and 4S compatible brushless outrunner motor and 50-amp •ESC
•Spektrum™ 6-channel receiver with industry-leading DSMX® technology
•Unmatched stability and precision of AS3X® technology for smoother flight performance
•Easy to fly with optional-use SAFE® Select flight envelope protection
•Shock-absorbing landing gear with oversized tundra-style wheels
•Functional and factory-installed LED landing, navigation and strobe lights
•Lightweight yet durable composite-reinforced, hollow-core EPO construction
•Optional-use leading edge slats for improved STOL and slow flight performance
•Optional EDO-style floats (EFL5261, sold separately)

E-flite Timber X PNP

$219.99/ EA

E-flite Timber X PNP

$219.99ITEM: EFL3875

EARN 220 REWARDS POINTS ON THIS ITEM

The original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling. From low-time to very experienced pilots, nearly everyone enjoys flying the Timber–but some wish it had even more aerobatic capability. The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat!

Key Features:
•Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
•Enlarged and oversized control surfaces with double-beveled hinge lines
•Six durable and factory-installed high-torque, metal-geared servos
•High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
•Shock-absorbing landing gear with oversized tundra-style wheels
•Functional and factory-installed LED landing, navigation and strobe lights
•Lightweight yet durable composite-reinforced, hollow-core EPO construction
•Optional-use leading edge slats for improved STOL and slow flight performance
•Optional EDO-style floats (EFL5261, sold separately)

E-flite Shoestring 15e ARF 50.5in

$149.99ITEM: EFL4205

EARN 150 REWARDS POINTS ON THIS ITEM

At home as a sport flyer or a serious racer, the E-flite Shoestring 15e EF1 Racer is built for performance. This electric sportster is NMPRA-legal for EF1-class pylon racing competition, by adding the E-flite Power 25 BL 1250Kv Outrunner motor, 60A brushless ESC, and 4S 2500mAh 14.8V 30C Li-Po battery. The spirited speedster is a mid-wing design constructed of lightweight balsa and plywood, with a low parts count that makes this ARF exceptionally easy to assemble. Adding to its great looks are the one-piece fiberglass cowl and included pilot figure, plus easy access through the secure battery hatch. Fulfill your need for speed with the E-flite Shoestring 15e EF1 Racer!

Key Features
• Equally at home as a sport flyer, or even faster racer
• NMPRA-legal for EF1-class pylon racing competition
• Easy-access magnetic top-hatch to change battery and access electronics
• Low parts count for quick assembly and easy transport
• Pilot included for added realism
• Lightweight balsa and plywood construction
• Genuine UltraCote trim scheme
• Two-piece plug-in wing for easy transport
• Painted one-piece fiberglass cowl

E-flite Pulse 15e PNP

$99.99ITEM: EFL4375

EARN 100 REWARDS POINTS ON THIS ITEM

Mike McConville designed the original Pulse™ model as a glow-powered sport airplane. What emerged is a low-wing aircraft with the versatility to satisfy the person looking for an exceptional RC flight experience. This winning formula launched a series of great flying all-wood models that are still popular to this day.

Until now, the popular Pulse™ design has only been available in balsa construction. With the E-flite® Pulse 15e, you can enjoy this great-flying platform with all the benefits durable Z-Foam™ material delivers. In addition to the proven Pulse design features, the Pulse 15e sport plane also gives you the flexibility to choose from multiple undercarriage setups including tricycle and tail-dragger configurations—hardware for both is included. You can also convert to floats using the Apprentice® S 15e float set (sold separately).

A quality park flyer like this E-flite® Pulse™ 15e model deserves genuine Spektrum™ technology. Not only will you possess a proven radio system at a great price, you’ll get the safety features that only exclusive ModelMatch™ and SmartSafe™ technologies can deliver. The Bind-N-Fly® technology built into every Spektrum receiver and transmitter gives you instant access to your entire fleet of aircraft so you can be ready to fly in the time it takes to charge a flight battery.

Key Features
• Easy to complete final assembly
• Tricycle and tail dragger landing gear options (included)
• Converts easily to a float plane (floats sold separately)
• Oversized access hatch and battery compartment
• Matching wheel pants and blue anodized aluminum main gear
• Potent 15-size brushless power system (installed)
• Accepts a wide range of 3S 11.1V Li-Po battery packs
• (4) Micro servos (installed)
• Lightweight design with hollow structure
• Constructed with durable Z-Foam™ material
• Tinted canopy provides a sport-scale appearance

Landing Gear Options
Multiple mounting locations are provided to make your choice of a tricycle or tail dragger landing gear option easy to exchange quickly.

Floatplane Conversion
Conversion to a float plane takes only the addition of the lightweight Apprentice® S15e float set (sold separately) which includes a steerable rudder.

Easy-Access Hatch
Add flight time or increase performance instantly. The oversized battery compartment can accommodate a range of 3S packs from 2500–4000mAh.

E-flite T-28 Trojan 1.1m BNF Basic

$199.99ITEM: EFL4450

EARN 200 REWARDS POINTS ON THIS ITEM

The original ParkZone® T-28 park flyer is practically a legend among the RC electric flight community. In production for nearly a decade, its friendly flying characteristics revolutionized warbird flying in convenient park-size settings. As a result, thousands of hobbyists were introduced to the benefits of brushless electric power and four-channel flight. It also proved that construction with Z-Foam™ material is surprisingly durable and easy to repair. This E-Flite® T-28 carries on the iconic park flyer design with the simplicity and efficiency of Bind-N-Fly® Basic so you can use the existing battery packs and charger already in your fleet.

The E-flite® T-28 park flyer is the ideal model for new pilots looking for the perfect first warbird. Distinctive in appearance with the look of a growling radial engine up front, frameless two-seat canopy and bulky airframe give this muscular warbird a heavy-metal impression. Engineering with exclusive Z-Foam™ material keeps the wing loading exceptionally light so that it flies better than most heavy-metal warbird models in any class. The vivid U.S. Navy-inspired trim scheme makes this historic favorite easy to recognize in the air. Like any good sport trainer, tricycle landing gear help make ground handling easy, plus the low-mounted wing has just the right amount of dihedral for good stability. Whether you want a quick flight at the local park, or a relaxing flight between rounds at a giant scale event, this T-28 is the park flyer you’ll never want to leave at home.

Key Features
• Easy to complete final assembly
• Lightweight construction with durable Z-Foam™ material
• Spektrum™ 6-channel AR610 DSMX® receiver (installed)
• 4-channel control with four E-flite mini servos (installed)
• 480 brushless outrunner motor, 960Kv (installed)
• 30A Pro brushless ESC with switch mode BEC (installed)
• Removable landing gear and steerable nose wheel
• Fits 1800–2200mAh 3S Li-Po battery packs (sold separately)
• Vivid U.S. Navy inspired paint scheme and trim
• Easy access hatch and battery compartment

Industry-Leading Control
The full-range Spektrum™ AR610 receiver installed into this E-flite® T-28 park flyer combines the speed and precision of DSMX® technology with the signal security of an active amplified antenna. This antenna enables the AR610 receiver to “see around” reflective materials, like the motor and battery, so you don’t have to worry about antenna polarization blind spots. It also allows the AR610 receiver to pick out your transmitter signal with remarkable clarity even in the noisiest 2.4GHz environments.

Z-Foam™ Material
Construction with durable Z-Foam™ material allows complex shapes to be made with greater accuracy while providing a lightweight airframe that’s easy to maintain.

Brushless Motor
The powerful 480-size brushless outrunner motor installed features 960Kv and delivers smooth operation that’s surprisingly quiet.

Li-Po Power System
Excellent flight times and good performance can be expected with a range of 3S Li-Po battery packs from 1800–2200mAh (EFLB18003S30, recommended).

Tricycle Landing Gear
Steerable nose wheel and rugged wire landing gear allow for smooth taxis, takeoffs and landings. For you hand-launch fans out there, the landing gear can be easily removed.  

E-flite DHC-2 Beaver 25e ARF 68in

$239.99ITEM: EFL4525

EARN 240 REWARDS POINTS ON THIS ITEM

The DHC-2 Beaver was designed by de Havilland of Canada for flight in remote wilderness areas of the world. The Beaver was designed to be exceptionally rugged and powerful. This single-engine monoplane could easily be retrofitted with wheels, skis or floats. The short takeoff and landing capabilities made it ideal to access areas that could normally only be reached by boat or foot. The Beaver entered into service in 1948 and quickly established itself by flying to the frozen, remote areas of Canada and Alaska. Despite the fact that production ceased in 1967, many of the DHC-2 Beavers are still flying today to access remote areas for fishermen or island-hopping tourists in the Caribbean.

Key Features
• The firewall setup for outrunner motors gives you the choice between E-flite® Power 25 and Power 32 motors
• Factory-painted fiberglass cowling, dummy motor and landing gear covers offer quality and scale detail throughout
• The optional floats (available separately) add another level of modeling enjoyment
• The float mounts built into the fuselage allow the landing gear and floats to be changed quickly
• The quality balsa and plywood airframe is sturdy and lightweight
• Removable one-piece wing allows for easy transportation and storage
• Genuine UltraCote® covering

The DHC-2 Beaver 25e ARF is part of E-flite’s PLATINUM SERIES. The platinum series delivers superior, enhanced features and meticulous attention to detail. E-flite’s Platinum Series is just one more way that E-flite brings you the most advanced electric flight experience.

The details of this PLATINUM SERIES scale model include corrugated flight surfaces, concealed tail linkages and a scale dummy motor. The construction of the lightweight, sturdy airframe is balsa and plywood. The scale enthusiast will admire the scale color scheme, prepainted fiberglass cowl, and genuine UltraCote® covering. In addition, the removable one-piece wing allows for easy transportation.

The DHC-2 Beaver is another exciting opportunity for pilots to experience civilian scale electric flight. Just like the versatility of the full-size DHC-2 Beaver, the E-flite model comes with float mounts built into the fuselage. For added fun, the pilot can quickly change the landing gear to the optional float set (EFLA500) for on-water takeoffs and landings. The large flap areas aid the characteristic short landings performed by the DHC-2. The DHC-2 gives the modeler options; it is outfitted with the new E-flite adjustable motor mount system which allows either the Power 25 or Power 32 brushless outrunner motors to be bolted directly onto the firewall. The combination of the PLATINUM SERIES detail and the additional float kit place the DHC-2 Beaver in a class of its own.

E-flite Super Cub 25e ARF 68in

$259.99ITEM: EFL4625

EARN 260 REWARDS POINTS ON THIS ITEM

The Cub that Captivates! The Super Cub 25e - Platinum Series - from E-flite.

For over half a century, Piper’s Super Cub has been a favorite of general aviation pilots who spend most of their time off the beaten path. Its respectable power, excellent short field performance and rugged design have made it perfect for back country transportation, towing gliders or simply getting away from it all. The E-flite Platinum Series Super Cub 25e expertly captures the look and feel of this aviation classic with an accurate scale outline unlike anything ever seen in its power class.

Key Features
• Functional, shock-absorbing main gear
• Magnetic, factory-painted fiberglass cowl with panel lines
• Realistic corrugation detail on flap and aileron control surfaces
• Functional split-fold cockpit door
• Scale aluminum wing struts
• Top quality balsa and light plywood construction
• Covered in genuine Hangar 9® UltraCote® covering
• Durable Super Cub wheels and tires
• Traditional Super Cub trim scheme
• Shock-absorbing leaf spring tail wheel assembly
• Two-piece plug-in wings
• Realistic cockpit interior details (sold separately)

E-flite Radian 2.0m BNF Basic

$179.99ITEM: EFL4750

EARN 180 REWARDS POINTS ON THIS ITEM

The E-flite® Radian® motor glider is all about enjoying the serenity of soaring. With no Hi-start or cumbersome launch system to worry about, its built-in high-power electric motor system and lightweight construction delivers a soaring experience that’s hassle-free. The distinctive, 2-meter span elliptical polyhedral wing allows it to efficiently capture lift and deliver excellent maneuverability with the simplicity of three-channel control. The 480-class brushless motor not only gives the Radian glider outstanding climb performance, its efficiency with the required battery will allow you to climb back up to altitude to chase those thermals multiple times on a single charge.

Key Features
• Easy to complete final assembly
• Bolt-on, two-piece wing with carbon-fiber joiner
• Reinforced wing and fuselage
• Spektrum™ 4-channel AR400 DSMX® receiver (installed)
• Constructed with durable Z-Foam™ material
• 480 Brushless motor & 30A ESC with brake (installed)
• Folding, two-blade propeller (installed)
• 2× E-flite micro servos (installed)
• Easy access hatch and battery compartment
• Conventional rudder and elevator linkage

The original ParkZone® Radian® airplane introduced many to the elegant simplicity of thermal soaring. Made of durable Z-foam™ material and equipped with a smooth, efficient brushless power system, it gave RC pilots a level of enjoyment that’s made flying with a glider the perfect activity even for grabbing a quick flight. This E-Flite® Radian motor glider carries on the design with improvements to the airframe for an even easier soaring experience.

It’s all about enjoying the serenity of soaring. With no Hi-start or cumbersome launch system to worry about, the built-in high-power electric motor system and lightweight construction of the Radian motor glider delivers a soaring experience that’s hassle-free. The distinctive, 2-meter span elliptical polyhedral wing allows it to efficiently capture lift and deliver excellent maneuverability with the simplicity of three-channel control. The 480-class brushless motor not only gives the Radian glider outstanding climb performance, its efficiency with the recommended battery will allow you to climb back up to altitude to chase those thermals multiple times on a single charge.

Industry-Leading Control
The full-range Spektrum™ AR400 receiver installed into this E-flite® Radian® motor glider combines the speed and precision of DSMX® technology with the signal security of an active amplified antenna. This antenna enables the AR400 receiver to “see around” reflective materials, like the motor and battery, so you don’t have to worry about antenna polarization blind spots. It also allows the AR400 receiver to pick out your transmitter signal with remarkable clarity even in the noisiest 2.4GHz environments. All of this is complemented by SmartSafe™ failsafe protection and the security of Spektrum™ QuickConnect™ technology that provides lightning-fast reconnection so you can be confident of being in complete command.

Z-Foam™ Material
Exclusive Z-Foam material makes it possible to create a design that’s lightweight and surprisingly durable. Any repairs are simple to make with just about any fast-setting glue.

Bolt-On Wing
The two-piece, plug-in wings feature carbon-fiber tube support and the long-lasting security of a mounting tab that connects each wing half with a single screw.

Outrunner Power
The efficient power system of the E-flite Radian motor glider features an 960Kv outrunner, 30A brushless ESC with the brake enabled and a folding two-blade propeller.

E-flite Commander mPd 1.4m BNF Basic

$199.99ITEM: EFL4850

EARN 200 REWARDS POINTS ON THIS ITEM

The Commander mPd® 1.4m park flyer is the result of a collaboration between veteran aircraft designer, David Payne, and the founder of Aircraft Design Studio, Mirco Pecorari. It is an entirely new design that blends classic lines with modern influences to give pilots a one-of-a-kind sport flying experience. It also incorporates innovative features like a Hands-Free Servo Connection System that lets you plug in or remove the wings without having to fuss with servo leads. This Bind-N-Fly® Basic version also gives you the extra stability of an AS3X receiver with optional SAFE Select flight envelope protection.

Key Features
• Visionary design by Mirco Pecorari and David Payne (mPd)
• Spektrum™ AS3X® receiver with optional SAFE® Select technology
• Wide flight envelope for everything from slow flight to aerobatics
• Factory-installed flaps for shorter takeoffs and landings
• Innovative Hands-Free Servo Connection System
• Goes together fast - only 8 screws required for initial assembly
• Powerful 15-size brushless motor with 45A ESC
• Vibrant trim scheme by Aircraft Design Studio
• Durable aluminum landing gear with wheel pants

Distinctive Design
David Payne and Mirco Pecorari drew from a wide variety full-scale and model aviation influences when designing the Commander mPd park flyer. They wanted it to stand out from the crowd yet still possess all the pilot-friendly flight characteristics that make traditional sport planes so much fun. In the process they also added little extras like a pilot figure as well as molded-in details like ribs on the wing and elevator, panel lines, fuel caps and more.

Wide Flight Envelope
A powerful brushless power system, light wing loading and factory-installed flaps work together to give the model a wide flight envelope. Control response is so smooth and predictable that anyone moving up from a trainer will feel comfortable right away. More experienced pilots will find that aggressive aerobatics like rolling circles and knife-edge flight feel crisp and precise and can be performed with power to spare.

Brushless Power System and Functional Flaps
The powerful 15-size brushless motor is paired with a 45A ESC that can handle high-output 3S 2200-3200mAh LiPo batteries. All this available power, along with the functional flaps, gives the airplane impressive short-field takeoff and landing performance in addition to its other fantastic flying qualities.

Easy Assembly and Hands-Free Servo Connectors
Out of the box, it only takes 8 screws to complete initial assembly. After that, all you have are the 4 wing screws whenever you want to remove or attach the wings. You don't even have to touch the servo leads. An innovative Hands-Free Servo Connection System automatically plugs in the aileron and flap servo connectors whenever you attach the wing.

AS3X Receiver with Optional SAFE Select Technology
The model's AS3X (Artificial Stabilization - 3-aXis) receiver works behind the scenes to smooth out the effects of wind and turbulence. The result is a sense of stability and precision that makes you feel like you're flying an expertly tuned aircraft.

This receiver also features optional SAFE Select technology that you can turn on and off with the flip of a transmitter switch. With SAFE Select technology activated, you get:

Pitch and Bank Angle Limits
These keep the aircraft from rolling or pitching upside down. They also prevent excessive climb or dive angles during takeoff and landing.

Automatic Self-Leveling
Instantly returns the wings to level when the sticks are released.

E-flite Commander mPd 1.4m PNP

$179.99ITEM: EFL4875

EARN 200 REWARDS POINTS ON THIS ITEM

The Commander mPd® 1.4m park flyer is the result of a collaboration between veteran aircraft designer, David Payne, and the founder of Aircraft Design Studio, Mirco Pecorari. It is an entirely new design that blends classic lines with modern influences to give pilots a one-of-a-kind sport flying experience. It also incorporates innovative features like a Hands-Free Servo Connection System that lets you plug in or remove the wings without having to fuss with servo leads. This Plug-N-Play® version comes with the motor, ESC and servos installed. All you need to do is finish some final assembly, install a receiver, charge a battery and fly.

Key Features
• Visionary design by Mirco Pecorari and David Payne (mPd)
• Wide flight envelope for everything from slow flight to aerobatics
• Factory-installed flaps for shorter takeoffs and landings
• Innovative Hands-Free Servo Connection System
• Goes together fast - only 8 screws required for initial assembly
• Powerful 15-size brushless motor with 45A ESC
• Vibrant trim scheme by Aircraft Design Studio
• Durable aluminum landing gear with wheel pants

Distinctive Design
David Payne and Mirco Pecorari drew from a wide variety full-scale and model aviation influences when designing the Commander mPd park flyer. They wanted it to stand out from the crowd yet still possess all the pilot-friendly flight characteristics that make traditional sport planes so much fun. In the process they also added little extras like a pilot figure as well as molded-in details like ribs on the wing and elevator, panel lines, fuel caps and more.

Wide Flight Envelope
A powerful brushless power system, light wing loading and factory-installed flaps work together to give the model a wide flight envelope. Control response is so smooth and predictable that anyone moving up from a trainer will feel comfortable right away. More experienced pilots will find that aggressive aerobatics like rolling circles and knife-edge flight feel crisp and precise and can be performed with power to spare.

Brushless Power System and Functional Flaps
The powerful 15-size brushless motor is paired with a 45A ESC that can handle high-output 3S 2200-3200mAh LiPo batteries. All this available power, along with the functional flaps, gives the airplane impressive short-field takeoff and landing performance in addition to its other fantastic flying qualities.

Easy Assembly and Hands-Free Servo Connectors
Out of the box, it only takes 8 screws to complete initial assembly. After that, all you have are the 4 wing screws whenever you want to remove or attach the wings. You don't even have to touch the servo leads. An innovative Hands-Free Servo Connection System automatically plugs in the aileron and flap servo connectors whenever you attach the wing.

E-flite Mystique RES 2.9 m ARF 114in

$349.99ITEM: EFL4915

EARN 350 REWARDS POINTS ON THIS ITEM

The E-flite® Mystique® RES 2.9 m ARF sailplane is inspired by the popular full-house Mystique 2.9 m except it has been specially modified to provide exquisite performance with only rudder, elevator and spoiler guidance controls.

Its large wingspan is built with just the right amount of polyhedral to provide gentle flight characteristics yet still have the authority to turn abruptly into a thermal the instant it’s sensed. The Selig S8032 airfoil used provides excellent handling over a wide speed range, plus the all-wood open-wing construction keeps weight to a minimum so you can take advantage of even the smallest amount of lift. Built-in spoilers offer the ability to dump lift without a gain in airspeed so you have control to escape a thermal and perform spot landings with greater precision. The contour of the molded fiberglass fuselage is sleek yet provides ample room for its pushrods to run internally and still have room for a powerful Li-Po motor battery.

Key Features
• Rudder, elevator and spoiler control
• Options included for electric motor power or pure sailplane flight
• Genuine Hangar 9® UltraCote® and UltraCote Lite film covering
• All wood, plug-in wings with pre-hinged spoilers
• Streamlined fiberglass fuselage with built-in fin
• Large canopy provides easy access to equipment and batteries
• Heavy-duty carbon fiber wing and stabilizer joiners
• Two-piece, plug-in stabilizer

E-flite Allusive 2.2m ARF 87.5in

$329.99ITEM: EFL4925

EARN 330 REWARDS POINTS ON THIS ITEM

The E-flite® Allusive™ 2.2 m ARF sailplane is an interesting breed of thermal soaring ship that’s both a capable glider and aerobatic sport model. Sleek from nose to tail and tip-to-tip, its wings are a fully-balsa sheeted foam core for a strong structure that naturally maintains airfoil integrity. The removable surfaces of the V-tail are a fully sheeted built-up structure and, like the wings, are covered with Hangar 9® UltraCote® covering in a high-contrast scheme. The ailerons and ruddervators feature film-hinging that’s sealed at the factory.

Thanks to a front fuse diameter of 40mm, a broad range of popular brushless outrunner motors like the E-flite Power 15 fits inside and has ample cooling. Just a 3S 2200mAh Li-Po flight pack is required for catching a thermal or grooving around. When equipped with a 4-channel radio with V-tail mix, the Allusive 2.2 m sailplane is the most fun you’ll have eluding the end of a great flying day.

Key Features
• Streamlined fiberglass fuselage with a painted finish that’s ready for your electronics
• Four-channel control with V-tail, ailerons and throttle
• Large canopy provides easy access to factory-installed plywood mounting points
• Two-piece, fully-balsa sheeted, foam-core, plug-in wings
• Built-up, balsa plug-in stabilizers
• Solid carbon fiber wing and stabilizer joiners
• Ready for installation of an E-flite® Power 15 outrunner
• Complete, high-quality hardware package
• Fiberglass control horns and pre-bent steel pushrods
• Factory finished, film hinging on the ailerons and ruddervators
• High-contrast, genuine Hangar 9® UltraCote® covering

E-flite Valiant 1.3m BNF Basic

$169.99ITEM: EFL4950

EARN 200 REWARDS POINTS ON THIS ITEM

The Valiant 1.3m park flyer is a downsized version of the big Hangar 9 Valiant 30cc ARF. Like its giant-scale sibling, it has the inherent stability of a classic high-wing model but with more modern lines and larger control surfaces that can provide sporty response when you want it. This Bind-N-Fly® version comes with the added benefit of a Spektrum™ AS3X receiver that features optional SAFE Select technology.

Versatile Performance and Functional Flaps
Some days you just want to unwind with some touch and gos. Others, you want to push the limits with aerobatics. The model's light wing loading, functional flaps and powerful brushless motor give you a big performance envelope to play with so, mild or wild, you can do it all.

High-Output Brushless Power System
The high-output power system delivers thrilling performance when matched with a 2200mAh 3S 11.1V 30C LiPo battery. You can use a wide variety of other 3S battery sizes too. The big, easy-to-access battery compartment can accommodate everything from 1300mAh to 3000mAh packs.

Optional Float Set Available Separately
The model is designed to accept an optional float set. Installation takes just a few minutes and all the necessary hardware is included.

AS3X Receiver with Optional SAFE Select Technology
The model's AS3X (Artificial Stabilization - 3-aXis) receiver works behind the scenes to smooth out the effects of wind and turbulence. The result is a sense of stability and precision that makes you feel like you're flying an expertly tuned aircraft.

If you're a relatively new pilot or want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional SAFE Select technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select features enabled, you get:

Pitch and Bank Angle Limits
These keep the aircraft from rolling or pitching upside down. They also prevent excessive climb or dive angles during takeoff and landing.

Automatic Self-Leveling
Instantly returns the wings to level when the sticks are released.

Easy Switch Assignment - No Programming Required
The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any programming and takes just a few seconds.

If you don't want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver. You can even fine-tune its AS3X settings if you have the Spektrum programming interface and a compatible programming cable (both available separately).

E-flite Valiant 1.3m PNP

$149.99ITEM: EFL4975

EARN 180 REWARDS POINTS ON THIS ITEM

The E-flite® Valiant 1.3m park flyer is a downsized version of the big Hangar 9 Valiant 30cc ARF. Like its giant-scale sibling, it has the inherent stability of a classic high-wing model but with more modern lines and larger control surfaces that can provide sporty response when you want it. This Plug-N-Play® version comes with the motor, ESC and servos installed. All you need to do is finish some final assembly, install the receiver, charge a battery and fly.

Key Features
• Based on the popular Hangar 9® Valiant™ 30cc ARF
• Wide flight envelope with sporty performance
• Functional flaps installed
• Powerful 480-size brushless motor and 30A ESC installed
• 6 micro servos installed
• Durable aluminum landing gear with wheel pants
• Optional float set available
• Constructed of durable Z-Foam™ Material

Versatile Performance and Functional Flaps
Some days you just want to unwind with some touch and gos. Others, you want to push the limits with aerobatics. The model's light wing loading, functional flaps and powerful brushless motor give you a big performance envelope to play with so, mild or wild, you can do it all.

High-Output Brushless Power System
The high-output power system delivers thrilling performance when matched with a 2200mAh 3S 11.1V 30C LiPo battery. You can use a wide variety of other 3S battery sizes too. The big, easy-to-access battery compartment can accommodate everything from 1300mAh to 3000mAh packs.

Optional Float Set Available Separately
The model is designed to accept an optional float set. Installation takes just a few minutes and all the necessary hardware is included.

E-flite Clipped Wing Cub 1.2m BNF Basic w/ AS3X and SAFE

$199.99ITEM: EFL5150

EARN 200 REWARDS POINTS ON THIS ITEM

The stock Cub is a legend for its gentle flying characteristics and abundant availability. Searching for a low-cost basic aerobatics alternative, inspired pilots modified the design into an entirely new aviation sensation. The E-flite® Clipped Wing Cub 1.2m park flyer features crisp scale detail and goes beyond the essence of the souped-up variant with inspiring versatility, and an abundance of power. As a result, you get the freedom only a Cub and deliver and the excitement of a hotrod in disguise.

The E-flite Clipped Wing Cub 1.2m is a “Cub Lover’s” must-have. Unlike many scale models with this level of detail, assembly only takes the turn of a few screws. The one-piece wing has outstanding rigidity for aerobatics as well as installation ease. Authentic aluminum wing struts offer fold-away convenience and install with quick-release hardware. Up front is the essential scale component no Cub should be denied— intricate engine detail with the signature flare of cooling baffles. Hidden inside is a powerful brushless motor system that delivers outstanding throttle response and the kind of vertical performance full-scale Cub pilots can only dream about. Functional shock-absorbing landing gear accessorized with matching strut covers and balloon-shaped wheel pants help you handle this beauty on the ground like a pro. Just like the real thing, this park flyer has friendly handling for scale flight that’s relaxing. But all you have to do to wake this sleeper is firewall the throttle and unleash the aerobatics animal within.

Features:
• A classic aerobat with authentic looks and great power
• High-power brushless motor with a robust 40A ESC
• Simple one-piece wing features rigid composite reinforcement
• Fold-away aluminum struts with quick-release hardware and storage
• Intricate scale engine, propeller and surface detail
• Shock-absorbing landing gear with scale covers and wheel pants
• 4-channel control with four micro servos installed
• Lightweight and durable EPO foam construction
• Large front, top hatch makes battery changes simple
• Optional float set makes float plane conversion easy
• Fits a wide range of 3S LiPo batteries from 2200–3000mAh
• Vibrant, high-visibility paint scheme

Functional Scale Detail: Cub lovers will appreciate the intricate detail of the exposed engine cylinders and cooling baffles. But what sets this scale park flyer apart is the functional shock-absorbing landing gear that articulates with concealed springs and is finished off with matching strut covers and fitted wheel pants. In addition, you get top-access for battery installation that maintains the scale outline and allows you to install the flight battery quickly.

Great Power: The power system features a high-speed 10-size brushless outrunner, a robust 40-amp ESC and a 2-blade propeller that combine with your 2200–3000mAh 3S LiPo battery to deliver thrust that helps this Clipped Wing Cub perform well beyond the basic aerobatics flight envelope with ease.

Durable Design: Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.

Fold Away Wing Struts: The wing features a rigid, one-piece design that connects to the fuselage with just a single screw. The aluminum struts lock into position with quick-release hardware and fold away into clips at the wing center section for storage and transport.

Optional Floats: You can turn this classic into a fun float plane simply by adding the optional Float Set (HBZ7390 sold separately). All it takes is the turn of a few screws and you can enjoy the serenity of flying from the local pond or lake.

Bind-N-Fly® Convenience: As an E-flite Bind-N-Fly Basic RC replica, you can enjoy air superiority in no time at all. The Clipped Cub BNF Basic is equipped with Spektrum 2.4GHz technology that's ready to bind to a 5+ channel DSM2/DSMX transmitter so you can be ready to fly within minutes of opening the box.

E-flite Clipped Wing Cub 1.2m PNP

$179.99ITEM: EFL5175

EARN 180 REWARDS POINTS ON THIS ITEM

The stock Cub is a legend for its gentle flying characteristics and abundant availability. Searching for a low-cost basic aerobatics alternative, inspired pilots modified the design into an entirely new aviation sensation. The E-flite® Clipped Wing Cub 1.2m park flyer features crisp scale detail and goes beyond the essence of the souped-up variant with inspiring versatility, and an abundance of power. As a result, you get the freedom only a Cub can deliver and the excitement of a hotrod in disguise.

The E-flite Clipped Wing Cub 1.2m is a “Cub Lover’s” must-have. Unlike many scale models with this level of detail, assembly only takes the turn of a few screws. The one-piece wing has outstanding rigidity for aerobatics as well as installation ease. Authentic aluminum wing struts offer fold-away convenience and install with quick-release hardware. Up front is the essential scale component no Cub should be denied— intricate engine detail with the signature flare of cooling baffles. Hidden inside is a powerful brushless motor system that delivers outstanding throttle response and the kind of vertical performance full-scale Cub pilots can only dream about. Functional shock-absorbing landing gear accessorized with matching strut covers and balloon-shaped wheel pants help you handle this beauty on the ground like a pro. Just like the real thing, this park flyer has friendly handling for scale flight that’s relaxing. But all you have to do to wake this sleeper is firewall the throttle and unleash the aerobatics animal within.

Functional Scale Detail
Cub lovers will appreciate the intricate detail of the exposed engine cylinders and cooling baffles. But what sets this scale park flyer apart is the functional shock-absorbing landing gear that articulates with concealed springs and is finished off with matching strut covers and fitted wheel pants. In addition, you get top-access for battery installation that maintains the scale outline and allows you to install the flight battery quickly.

Great Power
The power system features a high-speed 10-size brushless outrunner, a robust 40-amp ESC and a 2-blade propeller that combine with your 2200–3000mAh 3S LiPo battery to deliver thrust that helps this Clipped Wing Cub perform well beyond the basic aerobatics flight envelope with ease.

Durable Design
Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.

Fold Away Wing Struts
The wing features a rigid, one-piece design that connects to the fuselage with just a single screw. The aluminum struts lock into position with quick-release hardware and fold away into clips at the wing center section for storage and transport.

Optional Floats
You can turn this classic into a fun float plane simply by adding the optional Float Set (Sold Separately). All it takes is the turn of a few screws and you can enjoy the serenity of flying from the local pond or lake.

Plug-N-Play® Finish
The Plug-N-Play completion level means that the ideal electric motor system and servos you need to enjoy the full potential of this Clipped Cub are already installed. All you need to do is finish some final assembly, install a receiver, charge a battery and fly.

Timber 1.5m BNF Basic

$249.99/ EA

Timber 1.5m BNF Basic

$249.99ITEM: EFL5250

Overview

Make the world your runway with the amazing Timber™ 1.5m BNF® Basic park flyer. It comes equipped with an unbeatable combination of features that let everyone from newer pilots to expert sticks enjoy a versatile, sport-flying experience unlike any other.

Sport Aerobatics, Off-Field Adventure, Float Plane Fun-It Does it All

If you've been looking for a great, all-around park flyer that's up for anything, and can be flown almost anywhere, this is it. Its innovative design combines the spirited performance of a sport plane with the versatility of a bush plane so you really can have it all.

Tundra-Style Landing Gear or EDO-Style Floats-Both are Included!

Thick grass, gravel paths, local ponds, dirt trails-you can fly off these and many other surfaces that would be impossible for most models this size to handle. The Tundra-style landing gear features functional shock absorbers and oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance when flying off grass. The included float set matches the trim scheme of the airplane and features dual rudders for superb steering control.

Whichever option you choose to fly with, both are easy to install and can be swapped out in minutes.

STOL (Short Takeoff and Landing) Capabilities and an Abundance of Power

The Timber wing is designed with STOL features like wing-tip droops, optional leading edge slats and functional flaps. These, along with the model's powerful brushless motor and lightweight, Z-Foam™ construction, allow it to spring into the air or float down and land in as little as two feet or less.

Brilliant LED Light System

Out of the box, the model comes with realistic-looking nav lights, landing lights, wing-tip strobes and beacons, all installed and powered off the flight battery.

Durable Z-Foam™ Material with Hollow-Core Construction

Its lightweight, hollow-core construction is a big reason the Timber park flyer has such a wide range of capabilities. But don't let the light weight worry you. It's built using proven Z-Foam material that's tough enough to handle just about anything back-country flying can throw at it.

AS3X® Receiver with Optional SAFE® Select Technology

By changing up the binding sequence, newer RC pilots can activate SAFE technology features like self-leveling and angle limits that are built into the receiver. This will allow them to get a feel for the plane's impressive capabilities without feeling like they're in over their head, especially when flying in the wind. As with any SAFE system, they can assign a transmitter switch to turn the SAFE features on and off as needed.

Pilots who don't want to activate SAFE® technology can bind the receiver normally and it will behave like a standard AS3X receiver. They can even fine-tune the receiver's AS3X settings if they have the free Spektrum programming interface and a compatible programming cable (both available separately).

Key Features
•Sporty performance with amazing STOL capabilities
•Functional slotted flaps and optional leading-edge slats
•Shock-absorbing main landing gear with Tundra-style wheels
•Realistic EDO-style floats with dual water rudders
•LED navigation lights, landing lights, beacons and wing-tip strobes
•Lightweight, hollow-core construction
•Durable Z-Foam™ material
•AS3X® receiver with optional SAFE® Select technology
•Powerful brushless motor
•Requires a Spektrum™ DSMX®/DSM2® transmitter, sold separately
•Requires a 3S LiPo battery with an EC3™ connector and charger, sold separately

Product Specifications

Wingspan: 61.0 in (1555mm)
Overall Length: 40.9 in (1040mm)
Wing Area: 559.5 Sq In (36.1 Sq Dm)
Flying Weight: 50.3 oz (1400 g)
Motor Size: 10 size Brushless Outrunner
Servos: Included
CG (center of gravity): 60mm +/- 5mm back from leading edge of wing at the fuselage
Prop Size: 12 x 4
Speed Control : 40A Brushless
Recommended Battery: 2200mAh 3S Lipo with EC3 connector
Flaps: Installed
Charger: Not Included
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes

E-flite Timber 1.5m PNP w/ Floats

$219.99ITEM: EFL5275

EARN 220 REWARDS POINTS ON THIS ITEM

Make the world your runway with the amazing Timber™ 1.5m PNP park flyer. It comes equipped with an unbeatable combination of features that let everyone from newer pilots to expert sticks enjoy a versatile, sport-flying experience unlike any other.

Key Features
• Sporty performance with amazing STOL capabilities
• Functional slotted flaps and optional leading-edge slats
• Shock-absorbing main landing gear with Tundra-style wheels
• Realistic EDO-style floats with dual water rudders
• LED navigation lights, landing lights, beacons and wing-tip strobes
• Lightweight, hollow-core construction
• Durable Z-Foam™ material
• Powerful brushless motor

Sport Aerobatics, Off-Field Adventure, Float Plane Fun-It Does it All
If you've been looking for a great, all-around park flyer that's up for anything, and can be flown almost anywhere, this is it. Its innovative design combines the spirited performance of a sport plane with the versatility of a bush plane so you really can have it all.

Tundra-Style Landing Gear or EDO-Style Floats-Both are Included!
Thick grass, gravel paths, local ponds, dirt trails-you can fly off these and many other surfaces that would be impossible for most models this size to handle. The Tundra-style landing gear features functional shock absorbers and oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance when flying off grass. The included float set matches the trim scheme of the airplane and features dual rudders for superb steering control.

Whichever option you choose to fly with, both are easy to install and can be swapped out in minutes.

STOL (Short Takeoff and Landing) Capabilities and an Abundance of Power
The Timber wing is designed with STOL features like wing-tip droops, optional leading edge slats and functional flaps. These, along with the model's powerful brushless motor and lightweight, Z-Foam™ construction, allow it to spring into the air or float down and land in as little as two feet or less.

Brilliant LED Light System
Out of the box, the model comes with realistic-looking nav lights, landing lights, wing-tip strobes and beacons, all installed and powered off the flight battery.

Durable Z-Foam™ Material with Hollow-Core Construction
Its lightweight, hollow-core construction is a big reason the Timber park flyer has such a wide range of capabilities. But don't let the light weight worry you. It's built using proven Z-Foam material that's tough enough to handle just about anything back-country flying can throw at it.

E-flite Maule M-7 1.5m BNF Basic w/ AS3X and SAFE Select

$269.99ITEM: EFL5350

EARN 270 REWARDS POINTS ON THIS ITEM

While America geared up to go higher and faster, B.D. Maule was hard at work in a quiet country corner developing his vision of an aircraft that would give pilots the ability to do the exact opposite—practically. Maule Air Inc. has flourished ever since by delivering planes around the globe with renowned STOL capability and value. The E-flite® Maule M-7 1.5m park flyer is an officially licensed tribute to the full-size marvel that includes an abundance of scale detail, rugged landing gear, flaps and an optional-use float set so you can conquer any terrain year-round.

The E-flite® Maule M-7 1.5m captures the Short Take Off and Landing (STOL) capabilities, along with the unmistakable lines and character of the rugged full-scale design series. From the crystal-clear cabin windows and interior detail to an abundance of exterior features including LED lights, antennas, vortex generators and riveted panels, the Maule breaks new ground in park flyer-size civilian scale authenticity. EPO construction results in a lightweight yet durable airframe. The two-piece wing is equipped with operational flaps for outstanding slow flight performance and STOL capabilities. The factory-installed 3S and 4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or when flying from water using the included float set.

AS3X Receiver with Optional SAFE Select Technology
This Bind-N-Fly® Basic model features a Spektrum receiver integrated with AS3X® (Artificial Stabilization – 3-aXis) technology to smooth out the effects of wind and turbulence for the remarkable sense of stability and precision larger, expertly tuned aircraft enjoy.

If this is your first scale model or would like an extra margin of safety while getting familiar with the airplane, optional SAFE® Select flight protection can be enabled. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select features enabled, you get:

Pitch and Bank Angle Limits
• These keep the aircraft from rolling or pitching upside down. They also prevent excessive climb or dive angles during takeoff and landing.

Automatic Self-Leveling
• Instantly returns the wings to level when the sticks are released.

Easy Switch Assignment-No Programming Required
• The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any programming and takes just a few seconds.

Authentic Detail
As an officially licensed replica, this scale model features clear windows and interior detail including a pilot figure, plus complements to the scale outline including antennas, molded panel lines, rivets, vortex generators and functional LED lights.

Convenient Access
You get direct access through a front top-hatch that makes flight battery changes simple and convenient when using a 3–4S LiPo pack from 2200–3200mAh. A concealed hatch in the bottom offers easy access to the receiver resulting in a scale appearance that’s more authentic.

Versatile Brushless Power
The factory-installed power system features a high-power brushless outrunner motor and ESC that’s versatile enough to run either a 3S or 4S LiPo battery (sold separately). Either way, you enjoy thrust that hauls this Maule into the air with ease.

Easy to Assemble
No glue is required to complete assembly. The wing features a two-piece, plug-in design with folding struts that makes transport and storage convenient. The horizontal stabs slide into place and are secured with screws so assembly is quick and easy.

Functional Flaps
Like the full-size counterpart, the factory-installed flaps provide aerodynamic braking when deflected and increase lift substantially for stable slow-speed flight and remarkable STOL performance.

Floats Included
The included float set features a water rudder for superb steering control. The custom strut package ensures accurate alignment so that setup to fly from water is a breeze.

E-flite Maule M-7 1.5m PNP

$249.99ITEM: EFL5375

EARN 250 REWARDS POINTS ON THIS ITEM

While America geared up to go higher and faster, B.D. Maule was hard at work in a quiet country corner developing his vision of an aircraft that would give pilots the ability to do the exact opposite—practically. Maule Air Inc. has flourished ever since by delivering planes around the globe with renowned STOL capability and value. The E-flite® Maule M-7 1.5m park flyer is an officially licensed tribute to the full-size marvel that includes an abundance of scale detail, rugged landing gear, flaps and an optional-use float set so you can conquer any terrain year-round.

The E-flite® Maule M-7 1.5m captures the Short Take Off and Landing (STOL) capabilities, along with the unmistakable lines and character of the rugged full-scale design series. From the crystal-clear cabin windows and interior detail to an abundance of exterior features including LED lights, antennas, vortex generators and riveted panels, the Maule breaks new ground in park flyer-size civilian scale authenticity. EPO construction results in a lightweight yet durable airframe. The two-piece wing is equipped with operational flaps for outstanding slow flight performance and STOL capabilities. The factory-installed 3S and 4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or when flying from water using the included float set.

Authentic Detail
As an officially licensed replica, this scale model features clear windows and interior detail including a pilot figure, plus complements to the scale outline including antennas, molded panel lines, rivets, vortex generators and functional LED lights.

Convenient Access
You get direct access through a front top-hatch that makes flight battery changes simple and convenient when using a 3–4S LiPo pack from 2200–3200mAh. A concealed hatch in the bottom offers easy access to the receiver resulting in a scale appearance that’s more authentic.

Versatile Brushless Power
The factory-installed power system features a high-power brushless outrunner motor and ESC that’s versatile enough to run either a 3S or 4S LiPo battery (sold separately). Either way, you enjoy thrust that hauls this Maule into the air with ease.

Easy to Assemble
No glue is required to complete assembly. The wing features a two-piece, plug-in design with folding struts that makes transport and storage convenient. The horizontal stabs slide into place and are secured with screws so assembly is quick and easy.

Functional Flaps
Like the full-size counterpart, the factory-installed flaps provide aerodynamic braking when deflected and increase lift substantially for stable slow-speed flight and remarkable STOL performance.

Floats Included
The included float set features a water rudder for superb steering control. The custom strut package ensures accurate alignment so that setup to fly from water is a breeze.

E-flite Radian XL 2.6m BNF Basic

$229.99ITEM: EFL5550

EARN 230 REWARDS POINTS ON THIS ITEM

Ask any of the thousands of pilots who have flown one. Radian® motor gliders are the sailplanes of choice if you want a quick and easy way to experience the thrill of RC soaring or relax with a quick flight. They are so easy to fly, even pilots with no soaring experience have been able to master the art of riding thermals after just a few flights.

The giant E-Flite® Radian® XL 2.6m motor glider adds a whole new dimension of soaring excitement to the Radian line while staying true to its heritage with simple elevator/rudder/throttle/spoiler controls.

Key Feature
• Big and easy to fly
• Efficient 2.6-meter polyhedral wing with fully-proportional spoilers
• Full-Flying horizontal stabilizer for superb pitch control
• Assembles and disassembles in minutes
• Easy to transport and store
• Powerful, efficient brushless motor
• Constructed of durable, lightweight Z-Foam™ material
• The precision and stability of AS3X® technology

Efficient 2.6-Meter Polyhedral Wing with Spoilers
The wing, which spans just over 8 1/2 feet (102 inches) tip to tip, has been designed to provide superb thermal-grabbing capabilities while minimizing drag for maximum endurance. When it's time to return to Earth, its fully-proportional, retractable spoilers will allow you to precisely manage your descent and use less area to land.

Full-Flying Horizontal Stabilizer
The E-flite team designed the Radian® XL motor glider with a flying horizontal stabilizer for better pitch control. Unlike a fixed-position horizontal stabilizer with a hinged elevator, the entire stabilizer rotates up or down to provide extra aerodynamic force. The result is a big glider with superb pitch response at every speed.

Easy Assembly, Transport and Storage
Putting this massive flying machine together couldn't be easier. All you need is a few minutes and a Phillips-head screwdriver. The bolt-together wing comes in three pieces-a center section with spoilers and two outer sections. The 2-piece, full-flying elevator slides into the tail and bolts together.

Brushless Power and Lightweight Construction with Z-Foam Material
This combination gives the model an impressive power-to-weight ratio that translates into exhilarating launch performance. The lightweight airframe also makes the motor remarkably efficient at altitude so you can spend more time hunting for thermals.

The Precision and Stability of AS3X® Technology
The AS3X® technology built into the Spektrum™ AR636A receiver helps give the model an incredibly stable, locked-in feel in the air. This smooth, precise response makes for much more enjoyable flying experience, especially on windy days.

E-flite F-27 Evolution Bind-N-Fly Basic Electric Airplane w/AS3X & SAFE Technology

$149.99ITEM: EFL5650

EARN 180 REWARDS POINTS ON THIS ITEM

The original F-27 models, like the Stryker, introduced thousands of RC pilots to the fun of flying a durable and high-performance aircraft that harnessed the advantages of a flying wing design, evolutionary materials, advanced electronics and modern aerodynamics. The E-flite® F-27 Evolution™ airplane marks the times by combining a proven design with modern updates, including a significant boost in power, removable wings and a sleek FPV option that have it destined to be a new favorite well into the future and beyond.

The E-flite® F-27 Evolution™ lets you use 3S or 4S LiPo batteries to rip through the skies like a jet at ballistic speeds of 105mph (up to 85mph on 3S), or to slow down and cruise with the low-speed predictability of a sport model, all in the same flight. The wide performance envelope also allows you enjoy everything from blinding roll rates and tight loops to using full up elevator for slow, high-alpha flying and to practically ‘elevator’ to the ground. Utilizing a highly refined airfoil, the F-27 Evolution also features oversized elevons driven by metal-geared servos and a lightweight yet durable EPO airframe that’s reinforced to provide both strength and agility. Plus, its updated three-piece design allows you to quickly break it down for transport and storage without the need for tools or fasteners. You can even put yourself in the pilot seat by replacing the stock twist-lock nose with an optional nose that contains an FPV camera and video transmitter (VTX) while blending perfectly with the sleek outline. So whether this is your first flying wing experience or the F-27 reunion you’ve been waiting for, the Evolution is sure to thrill like no other can, and at a value that simply can’t be beat.

Features:
• The evolution and return of an all-time favorite
• High-Power 3–4S LiPo compatible brushless motor and ESC
• Stability and precision of AS3X® technology
• Optional SAFE® Select flight envelope protection
• Removable wing design for easy transport and storage
• Oversized elevons for maximum roll and pitch authority
• Optional nose includes FPV camera and VTX (EFL5608 sold separately)
• Lightweight and durable EPO foam construction
• Large top hatch simplifies battery changes
• Digital, metal-geared servos installed
• Spektrum™ 6-channel receiver with industry-leading DSMX® technology
• Speeds up to 85mph on 3S and 105mph on 4S

Durable Design: Oversized elevons are controlled with digital metal-geared servos that offer precise control and unmatched durability. The aerodynamically efficient design features composite reinforcement throughout its lightweight EPO structure to provide a rigid airframe that’s durable and has low wing loading.

Ballistic Power: The robust brushless power system delivers great performance and speeds of up to 85mph when flown on a 3S LiPo battery, or you can install a 4S battery for outstanding acceleration, beyond unlimited vertical performance and straight-line speeds of 105mph.

Three-Piece Airframe: At just under 40-inches in span, the F-27 Evolution is easy to keep together, or take apart for storage and transport that’s more compact than any flying wing it its class. The wings are supported by carbon fiber tubes and connect to the center section using a unique attachment system that secures them without the need for tools or fasteners.

FPV Ready: The stock twist-lock attached nose can be quickly replaced with an optional nose (EFL5608 sold separately) containing an integrated FPV camera and video transmitter (VTX) that blends perfectly into the sleek outline and easily connects to the factory-installed wiring harness.

AS3X Receiver with Optional SAFE Select Technology: This Bind-N-Fly® Basic model is equipped with an AS3X® (Artificial Stabilization – 3-aXis) receiver that works behind the scenes to smooth out the effects of wind and turbulence. The result is a sense of stability and precision that makes you feel like you’re flying a larger and expertly tuned aircraft.

E-flite F-27 Evolution Plug-N-Play Basic Electric Airplane

$129.99ITEM: EFL5675

EARN 150 REWARDS POINTS ON THIS ITEM

The original F-27 models, like the Stryker, introduced thousands of RC pilots to the fun of flying a durable and high-performance aircraft that harnessed the advantages of a flying wing design, evolutionary materials, advanced electronics and modern aerodynamics. The E-flite® F-27 Evolution™ airplane marks the times by combining a proven design with modern updates, including a significant boost in power, removable wings and a sleek FPV option that have it destined to be a new favorite well into the future and beyond.

The E-flite® F-27 Evolution™ lets you use 3S or 4S LiPo batteries to rip through the skies like a jet at ballistic speeds of 105mph (up to 85mph on 3S), or to slow down and cruise with the low-speed predictability of a sport model, all in the same flight. The wide performance envelope also allows you enjoy everything from blinding roll rates and tight loops to using full up elevator for slow, high-alpha flying and to practically ‘elevator’ to the ground. Utilizing a highly refined airfoil, the F-27 Evolution also features oversized elevons driven by metal-geared servos and a lightweight yet durable EPO airframe that’s reinforced to provide both strength and agility. Plus, its updated three-piece design allows you to quickly break it down for transport and storage without the need for tools or fasteners. You can even put yourself in the pilot seat by replacing the stock twist-lock nose with an optional nose that contains an FPV camera and video transmitter (VTX) while blending perfectly with the sleek outline. So whether this is your first flying wing experience or the F-27 reunion you’ve been waiting for, the Evolution is sure to thrill like no other can, and at a value that simply can’t be beat.

Features:
• The evolution and return of an all-time favorite
• High-Power 3–4S LiPo compatible brushless motor and ESC
• Removable wing design for easy transport and storage
• Oversized elevons for maximum roll and pitch authority
• Optional nose includes FPV camera and VTX (EFL5608 sold separately)
• Lightweight and durable EPO foam construction
• Large top hatch simplifies battery changes
• Digital, metal-geared servos installed
• Speeds up to 85mph on 3S and 105mph on 4S

Durable Design: Oversized elevons are controlled with digital metal-geared servos that offer precise control and unmatched durability. The aerodynamically efficient design features composite reinforcement throughout its lightweight EPO structure to provide a rigid airframe that’s durable and has low wing loading.

Ballistic Power: The robust brushless power system delivers great performance and speeds of up to 85mph when flown on a 3S LiPo battery, or you can install a 4S battery for outstanding acceleration, beyond unlimited vertical performance and straight-line speeds of 105mph.

Three-Piece Airframe: At just under 40-inches in span, the F-27 Evolution is easy to keep together, or take apart for storage and transport that’s more compact than any flying wing it its class. The wings are supported by carbon fiber tubes and connect to the center section using a unique attachment system that secures them without the need for tools or fasteners.

FPV Ready: The stock twist-lock attached nose can be quickly replaced with an optional nose (EFL5608 sold separately) containing an integrated FPV camera and video transmitter (VTX) that blends perfectly into the sleek outline and easily connects to the factory-installed wiring harness.

Plug-N-Play: This Plug-N-Play model comes with the motor, ESC and servos installed. All you need to do is finish some final assembly, install a receiver, charge a battery and fly.

112 found, showing page 2 of 5