Axial

Axial Truck Parts
 
19 found, showing page 1 of 2

Axial Yeti 1/10 4WD Electric Rock Racer Kit

$329.99ITEM: AXIC9025

EARN 330 REWARDS POINTS ON THIS ITEM

This is the Axial ""Yeti"" 1/10 Scale 4WD Electric Rock Racer Kit. Now in kit form, the Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and independent front suspension. Its distinct aesthetic and technical elements were inspired by full-size desert trucks. Its strategically engineered design supplies bashing stamina while delivering a high level of technical rock racing abilities without compromise in either category. This kit version will accept standard 1/10th scale brushed and brushless 4-pole systems and most major stick pack batteries. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling.

ROCK RACING
Rock Racing is the next up and coming form of R/C off road racing. Enthusiasts are taking it upon themselves to go back to the dirt with tracks composed of loose surfaces and big rocks. It's distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles, especially rock racers, which are built for high speed performance through flat desert sections, and durability when tackling extreme off road terrain.

SKILLFULLY ENGINEERED
The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.

INDEPENDENT FRONT SUSPENSION
The Yeti™ is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti™ will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.

2.2 FALKEN WILDPEAK M/T TIRES
The WildPeak All Terrain tire has amazing traction on many surfaces, even with its rather conservative pattern. This fact alone has had the entire industry on the edge of their seats waiting to see what the Falken rubber will be able to do with a more aggressive pattern. The WildPeak M/T version of this tire is here, albeit in a prototype stage. These prototypes are already being put through their paces by the who's who of the off road world. With tremendous success in competitive rock racing, this tire is already in very high demand. The Axial S30 compound will offer the performance you have come to expect from Axial.

2.2 METHOD IFD™ BEADLOCK WHEELS
Based off the Method MR101s these officially licensed wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith™, AX10™ or SCX10™. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress up with a new look.

ICON ALUMINUM SHOCKS
These featured Icon Vehicle Dynamics aluminum shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability.

HEAVY DUTY BEVEL GEARS
The heavy duty gear set offers you improved gear mesh reducing slop in the drive train. In addition it helps add weight low down which helps keep the center of gravity low and on the rocks where you want it. Made from high grade steel and hardened for increased strength.

ALUMINUM LOWER LINK PLATES
Includes Hard Anodized 2mm Aluminum AX31245 Lower Link Plate Set (Aluminum) (4pcs) for added durability and stiffness of the rear 4 link suspension.

M4 THREADED ALUMINUM TURNBUCKLES
Hard anodized aluminum M4 threaded turnbuckles on the independent front suspension for added tuning.

UNIVERSAL AXLE SET
Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is made of hardened steel so it's capable of handling extreme power.

AR60 OCP-AXLE
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material

LONG TRAVEL REAR SWAY BAR
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.

4-LINKED REAR SUSPENSION
The Yeti™ features the proven AR60 rear axle with a completely new 4-linked rear suspension. The Yeti™ chassis offers three upper link positions to adjust the anti-squat. The lower link mounts can be flipped to change the roll center. These advanced tuning options will help you get the most performance from your rig.

WB8 HD WILDBOAR™ REAR DRIVESHAFT
The WB8 HD rear driveshaft features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.

WB8 HD CENTER CVD JOINT
The WB8 HD Wildboar™ Driveshaft Joint is employed from the transmission to the front bulkhead. It features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.

DUAL SLIPPER CLUTCH
Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

PROTECTIVE TRANSMISSION COVER
Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drivetrain, and it also prevents any loose wires from getting chewed up!

HI-LO TRANSMISSION
The Axial Hi-Lo transmission was specifically designed for the Yeti chassis. With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment and brushless power. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Optional two-speed transmission component sold separately.

DUAL SHEAR STEERING RACK
Updated dual shear steering rack with full ball bearings and machined steel guide posts - AX31192 Steel Steering Post.

RECEIVER BOX, WATERPROOF
The waterproof receiver box is integrated into the bottom of the Yeti™ chassis. Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

FULLY ADJUSTABLE BATTERY TRAY
The integrated battery tray can be easily accessed by removing the two front body pins and pivoting up the entire body. Gain full access to the battery trap door by removing the remaining body pin. The battery tray is fully height adjustable with four button head screws, making room for most standard sized 2S and 3S LiPo battery packs.

REALISTIC SCALE DETAILS
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three white styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points. Includes realistic driver figures complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included, choose your own style!

Axial 1/8 Yeti XL Monster Buggy 4WD Kit

$469.99ITEM: AXIC9038

This is the Radio Controlled, Electric Powered, 1/8 scale 4WD Yeti XL Rock Racer Kit from Axial.              

Axial SCX10 II 1/10 2000 Jeep Cherokee Rock Crawler Kit

$329.99ITEM: AXIC9046

EARN 350 REWARDS POINTS ON THIS ITEM

The Axial SCX10 II retains the spirit of the SCX10 with its all-metal twin c-channel frame rails. But the frame rails are only 2% of this completely fresh design. Scale AR44 high pinion axles, a chassis mounted servo (CMS), re-designed transmission with transfer case, front mounted battery tray, aluminum suspension links that use M4 hardware, and a suspension design that creates nearly zero bump steer. These are just a few of the features built into the SCX10 II.

AR44 HI-PINION AXLES
• High pinion gears for added ground clearance & better driveshaft angles
• The high pinion design allows increased gear surface contact for increased durability
• Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
• Single piece axle housing for added strength
• Small pumpkin for increased clearance and a more realistic, scale look
• Front and rear 1-piece lockers
• Bolt on link mounts
• Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
• Optimized gear ratio – 3.75 compared the previous at 2.92 – this reduces torque twist at the axle which is typically seen with other small pumpkin axle designs

2000 JEEP® CHEROKEE BODY
• Comes with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel).
• Clear Body with detailed decal sheet and window masks

SCX10™ II TRANSMISSION
• Transfer case design helps keep the driveshaft’s centered and as low as possible in the chassis
• Final drive ratio range 33.69 – 54.15 with available spur - pinion gear combinations
• Comes with 56T spur gear and 15T pinion / 32-pitch for durability
• All metal internal gears for strength and durability
• Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15 - Original SCX10 was 33.06
• Scale looks mimics a full size transmission and transfer case

CHASSIS MOUNTED SERVO (CMS)
• Scale looks with proper suspension geometry
• Anodized aluminum links included w/ M4 rod ends
• Adjustable servo mounting system allows for a wide range of servos to be used
• Properly designed suspension for nearly zero bump steer

AR44 UNIVERSAL AXLE SET
• Up to 45 degrees of steering
• Smooth action for an efficient drivetrain
• Compact yet durable design
• Hardened steel construction

KINGPIN ANGLE
• 8 degree kingpin angle
• Improved scrub radius over the AX10 axle

ALL ALUMINUM SUSPENSION LINKS
• All links are metal including the steering
• Custom tapered center - flared ends design
• Large M4 rod ends
• Grey anodized aluminum

1.9 METHOD MESH WHEELS
• Officially licensed METHOD Mesh Wheels are replicated in true form for durability and a clean look.

1.9 BFGOODRICH ALL-TERRAIN T/A® KO2 TIRES - R35
• Officially licensed by BFGoodrich
• 4.65” x 1.65” / 1.9 (118mm x 42.5mm)
• R35 compound

ADJUSTABLE WHEELBASE
• Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer.
• Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately
• 4 link rear
• 12.3” wheelbase

ICON ALUMINUM SHOCKS
• Fully licensed Icon Vehicle Dynamics™ shocks feature clear coated polished aluminum bodies, complete with aluminum faux reservoirs.
• Main shock body is threaded for quick ride height adjustments and pre-load tuning ability.
• Completely rebuildable, tunable and offer consistent handling.
• 61-90mm Aluminum Shock Set with 7mm piston.

JCR OFFROAD VANGUARD BUMPERS
• Scale licensed JCR Offroad front and rear bumpers.
• Rear mount has been extended and stiffer plastics chosen to help limit the typical sag seen in plastic bumpers.
• Lenses included for light locations on bumpers.
• Rear tow hitch included for added scale appearance.

JCR OFFROAD XJ ROCK SLIDERS
• Scale rock sliders licensed by JCR Offroad.
• Specifically sized to fit the Axial Jeep® Cherokee body.
• Adjustable widths.

JCR OFFROAD ROOF RACK
• JCR Offroad roof rack with mounting points for optional lights.

ADJUSTABLE BATTERY TRAY
• The adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).
• Adjustable tray that prevents the battery from coming loose or shifting while driving.
• Posts are included to fine tune the fit based on the battery you choose.
• Easy access for quicker battery changes.
• Can accommodate batteries up to 32x44x147mm (3S 5,000mAh).

STEEL C-CHANNEL FRAME RAIL CHASSIS
• The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware.
• Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness).
• Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance.
• Simplified design makes maintenance and assembly quick and easy.
• The contoured skid plate significantly reduces hang-ups on terrain.
• Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments.

WIRE ROUTING
• Wire routing has been thoroughly thought through to help keep your chassis layout looking clean.
• In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
• Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo.

WATERPROOF RECEIVER BOX/ESC TRAY
• Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
• Waterproof receiver box located on the side plates allows easy access and low center of gravity.
• Clean mounting surface for your ESC is large enough to accommodate up to 50x40mm footprint.

WB8 HD WILDBOAR™ DRIVESHAFTS
• WB8 HD Wildboar™ front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.
• A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability/easy maintenance.
• Adjustable length driveline parts included in box.

1/10 RR10 Bomber 4WD Kit

$359.99ITEM: AXIC9053

1/10 RR10 Bomber 4WD Kit

1/10 Wraith Spawn Electric 4WD Kit

$329.99ITEM: AXIC9056

1/10 Wraith Spawn Electr

Axial 1/10 Yeti SCORE Trophy Truck 4WD Kit

$349.99ITEM: AXIC9068

This is the 1/10 scale Electric Powered, Radio Controlled Yeti SCORE Trophy Truck Kit from Axial.                

Axial Wraith 1/10 4WD Ready-to-Run Electric Rock Racer

$399.99ITEM: AXID9018

EARN 400 REWARDS POINTS ON THIS ITEM

This is the Axial ""Wraith"" 1/10th 4WD Ready-to-Run Electric Rock Racer. The Wraith is another ""FIRST"" for Axial with the first and most realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith is not just a low speed rock crawler, it is built to go fast. With its impressive 1:1 scale looks, high-speed monster truck ""bashability,"" and technical ""crawl"" capabilities, the Axial Wraith is going to change the game. With realistic looks, drivability and ready-to-run ease, this vehicle is the perfect blank canvas for the enthusiast looking for a vehicle to build upon. The Wraith is an extremely versatile vehicle that can be driven in a variety of conditions; desert sand, mountain trail runner, rock racer, mud bogger and any form of backyard bashing that can be dreamed up!

Within the full size rock crawling & off-road race segments, overall tire diameters have been on the rise, literally. This has directly influenced RC Crawlers and the Axial Ripsaw reflects this attraction of flirting with rocks at speed with a compelling design that will give your rig and aggressive competition look, while at the same time drastically improving performance. The Axial 2.2 Ripsaw Tires are a realistic looking tire for the image-conscious scale crawler, but will also help to improve performance with an aggressive tread design, the sticky R35 compound and great ground clearance.

AR60 OCP-Axle (Off Center Pumpkin Design): True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.

4-Link Suspension: The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.

Optimized Steering Geometry: The front axle steering geometry is engineered for high speed performance with close attention to maximum pivot angle, minimal scrub, adjustable caster and Ackerman set as close to 0-degrees as possible. This geometry theory achieves a desired tight turning radius with locked differentials and better steering control at high speeds.

Full Tube Frame Composite Chassis: The most realistic high strength composite tube frame chassis on the market. Our high strength composite plastic is impact resistant to help protect the Wraith from crash damage. Assembled with all hex hardware.

Corbeau® LG1 Licensed Race Seats: Fully licensed Corbeau® LG1 race seats add to the scale realism of the already highly detailed interior set.

AE-2 ESC with Drag Brake: The Axial AE-2 ESC was developed in partnership with Castle Creations and features LiPo cutoff, drag brake for tough crawling situations, a Tamiya style plug connector and is programmable via Castle Link (Castle Link not included).

Lighting 6 LED's with Extra Light Buckets: The Simple LED Controller connects to the receiver and is turned on/off with the main power switch of the truck. There are four white LED's for the front and two red LED's for the rear. Additional light buckets are also included for custom looks.

Protective Transmission Spur Gear Cover: Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drivetrain.

Slipper Clutch: Allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.

2.4GHz Radio System: The AX-2 2.4GHz transmitter is a two channel pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers and a battery indicator light that lets you know when your transmitter batteries run low. The AR-2 2.4GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts. It's lightweight, compact in size and the bind button with LED indicator makes set-up easy!

Waterproof Radio Box: Protects the receiver from dust and debris and is waterproof for the ultimate in weather protection.

Easy Diff Access: A locked differential will provide the most positive wheel traction in all off-road environments and conditions. The locked differential also provides less maintenance over oil-filled or silicone based differentials. Easily serviced by removing four screws to gain access for maintenance, rebuilding and performance tuning.

Battery Tray for Standard Stick Pack and LiPo Packs: Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size. No disassembly or tools needed to remove and replace the battery.

High Performance Shocks: Axial competition style shocks feature threaded shock bodies for tuning and easy pre-load adjustment, 3.5mm titanium nitride coated shock shafts for reduced lateral movement, silicone diaphragms for a more consistent feel and silicone bushings to prevent binding. These shocks are also upgradable with a variety of aluminum options to further increase suspension performance.

On/Off Switch: Conveniently located under the dash.

2.2 Rebel Wheels and Ripsaw Tires: Ripsaw tires are mounted and pre-glued to 8-spoke Rebel Wheels right from the factory. The Axial 2.2 Ripsaw Tires are a realistic looking tire for the image-conscious scale crawler, but will also help to improve performance with an aggressive tread design, the sticky R35 compound and great ground clearance. The Ripsaw measures 5.5"" [140mm] in diameter. This gives the lowest point on the 4X4 axle housing more clearance thus giving you more tactical driving options in those sticky predicaments! The Rebel wheels are made from a strong composite material which is both lightweight and durable.

20T Motor: Tear up the terrain, be it flat out desert, rocky roads or crawling! Easy operation: no tuning, no fuel, no loud exhaust noise. Just plug'n'go! Our design allows for optional 550 size motors to fit as well.

AXI30793 Dig Upgrade Set (not included): The Wraith transmission is easily upgradable for Dig (patent pending) function which, when installed, gives you a three function transmission. The transmission also includes all steel outputs. The optional Dig Upgrade Set for the Wraith comes with servo linkage, slider parts and a new output shaft. When installed you have 4x4, 4x2 (freewheel) and Dig (rear locked). This aids in extreme climbs and descents and turning a tight radius. (not included - extra servo and three channel radio system also required).

Axial Yeti 1/10 4WD Ready-to-Run Electric Rock Racer

$429.99ITEM: AXID9026

EARN 430 REWARDS POINTS ON THIS ITEM

This is the Axial ""Yeti"" 1/10th 4WD Ready-to-Run Electric Rock Racer. The Axial Yeti is built to withstand the punishment of rock racing. Its distinct aesthetic and technical elements were inspired by full-size desert trucks, and deliver a no-compromise mix of speed and handling unlike any other R/C vehicle. It's powered by a 3150KV 4-pole brushless motor which provides a massive amount of power, especially when powered by 3S. In the suspension department, the Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling. It's as serious as you want it to be, with true fun factor characteristics that make it a blast to drive.

SKILLFULLY ENGINEERED: The Yeti™ is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.

INDEPENDENT FRONT SUSPENSION: The Yeti™ is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti™ will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.

VANGUARD ESC, 3S LIPO, WATERPROOF: Developed by Castle Creation for Axial, the Vanguard ESC provides exceptional power, braking and adjustability. The ESC comes standard with Deans® Ultra Plugs®. The ESC can be programmed manually via Castle Field Programming Card or through the Castle Link software interface (optional).

3150KV BRUSHLESS MOTOR: The included 3150KV waterproof 4-pole brushless motor provides the perfect amount of torque and speed. The long can design provides a massive amount of power, especially when powered by 3S.

ALUMINUM SHOCK BODIES: Aluminum shock bodies are standard equipment in this RTR Yeti™, making for very smooth suspension movement throughout the full range of wheel travel. These bodies are precision machined for consistent handling when putting the Yeti™ through its paces.

AR60 OCP-AXLE™: The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of the axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material

4-LINKED REAR SUSPENSION: The Yeti™ features the proven AR60 rear axle with a unique 4-linked rear suspension and three upper link positions to adjust the anti-squat. The lower link mounts can be flipped to change the roll center. These advanced tuning options will help you get the most performance from your rig.

LONG TRAVEL REAR SWAY BAR: This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.

BFGOODRICH® KRAWLER™ T/A® KX TIRES: In the full-size offroad world, BFGoodrich® Krawler™ T/A® KX tires are the winner of more rock-crawling championships than all other tires combined. The Axial version of this tire captures the same aggressive look and provides awesome performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to it’s high level of performance and diversity.

WALKER EVANS RACING WHEELS: Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. The IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with an original look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring.
• Utilizes 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly

WB8 HD WILDBOAR™ REAR DRIVESHAFT: The WB8 HD rear driveshaft features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design for more durability and easy maintenance.

WB8 HD CENTER CVD JOINT: The WB8 HD Wildboar™ Driveshaft Joint is employed from the transmission to the front bulkhead. It features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.

HI-LO TRANSMISSION: The Axial Hi-Lo transmission was specifically designed for the Yeti chassis. With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment and brushless power. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Optional two-speed transmission component sold separately.

DUAL SHEAR STEERING RACK: The Yeti™ features an updated EXO steering rack that offers additional strength for 2.2 size tires, and double shear capture points on the steering tie rods for ready-to-go rock racing action!

REALISTIC SCALE DETAILS: Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, two black styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points.

FULLY ADJUSTABLE BATTERY TRAY: The integrated battery tray can be easily accessed by removing the two front body pins and pivoting up the entire body. Gain full access to the battery trap door by removing the remaining body pin. The battery tray is fully height adjustable with four button head screws, making room for most standard sized 2S and 3S LiPo battery packs.

MAIN CHASSIS:
• Added ribs for strength which reduces flex and helps deflect debris
• Tapered shape reduces catch points under compression
• Minimal hardware exposed
• Separate bolt on 4-link mounts which can be swapped left to right to change link geometry. This increases the YETI's versatility by giving you more tuning options.
• The chassis length has been minimized to maximize the lower control arms for added travel and stability at high speeds

WATERPROOF RECEIVER BOX: The waterproof receiver box is integrated into the bottom of the Yeti™ chassis. No more stress when running in mud, water, or snow!

METAL GEAR TACTIC SERVO: The included Tactic TSX45 metal gear servo is water resistant, and rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

2.4GHz RADIO: The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers.

3-CHANNEL 2.4GHz RECEIVER: The AR-3 2.4GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts.

1/10 Wraith Jeep Wrangler Poison Spyder

$399.99ITEM: AXID9031

This is the Radio Controlled, Electric Powered, Ready to Run          
           Jeep Wrangler Wraith-Poison Spyder Rock Racer from Axial Racing.    
                                                                              
        Jeep and related logos, vehicle model names and trade dresses          
           are trademarks of Chrysler Group LLC and are used under            
            license by Axial R/C Inc. © Chrysler Group LLC 2014.              
                                                                              
FEATURES: Chassis: Full tube composite chassis                                
          Drive: Four wheel with locked differentials and offset pumpkin for  
            more ground clearance and a better driveshaft angle, AR60 OCP-Axle
            constructed from high strength, low flex composite material, axle  
            tubes are reinforced and beefed up with a boxed-in axle truss to  
            distribute stress over a larger area                              
          Radio: AX-3 2.4GHz 2-channel with steering and throttle trim and    
            reverse                                                            
          ESC: AE-2 with LiPo cutoff, drag brake, Tamiya connector, and is    
            programmable with the Castle Link programmer (not included)        
          Motor: 20 turn                                                      
          Body: Officially licensed Jeep Wrangler body with Poison Spyder      
            graphics, complete interior with seats, dashboard, steering wheel,
            and center console                                                
          Battery Tray: Sized for standard stick pack and LiPo packs up to    
            1.8x5.9x1.1" (47x150x28mm) in size                                
          Suspension: True four link                                          
          Shocks: Composite body , oil filled                                  
          Wheels: Officially licensed Trail Ready HD series beadlock, wheels  
            mount to any Axial Wraith, AX10 Ridgecrest or SCX10                
          Tires: BFGoodrich Krawler T/A KX                                    
                                                                              
INCLUDES: RTR Jeep Wrangler Wraith-Poison Spyder with 2.4GHz Radio, Motor, ESC,
            and Instructions                                                  
                                                                              
REQUIRES: Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack            
          Battery Charger: For selected battery type                          
          AA Batteries: Four for transmitter                                  
                                                                              
SPECS:      Vehicle;                                                          
          Wheelbase: 13.98" (355mm)                                            
          Ground Clearance: 2.8" (71.6mm)                                      
          Height: 9.1" (232mm)                                                
          Width: 11.22" (285mm)                                                
          Length: 19.25" (489mm)                                              
          Weight: 5.45lbs (2.47kg)                                            
            Body;                                                              
          Length: 16.25" (413mm)                                              
          Width:  6.75" (171mm)                                                
          Height: 4.9"  (124mm)                                                
                                                                              
COMMENTS: For Replacement Ball Bearings use:                                  
            Qty.   Size         Location                   Qty.  Bearing Set  
             2   10x15x4mm      Fr Diff                     1    DTXC1595      
             2   10x15x4mm      Rear Diff                   1    DTXC1595      
             2   5x11x4mm       Fr Axle Housing             1    DTXC1547      
             2   5x11x4mm       Rear Axle Housing           1    DTXC1547      
             2   5x11x4mm       Fr Dogbones                 1    DTXC1547      
             2   5x11x4mm       Rear Dogbones               1    DTXC1547      
             5   5x10x4mm       Gearbox                     2    DTXC1535      
             1   8x16x5mm       Gearbox                     1    DTXC1585      
             1   5x11x4mm       Spur Gear                   1    DTXC1547  

1/8 Yeti XL 4WD RTR

$659.99/ EA

1/8 Yeti XL 4WD RTR

$659.99ITEM: AXID9032

This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 scale        
                      Ready to Run Yeti XL Monster Buggy from Axial.          
                                                                              
FEATURES: Chassis: Composite plastic with integrated upper and lower aluminum  
            braces for greater stiffness, multiple upper link positions to    
            adjust anti-squat                                                  
          Drive: Four wheel shaft, AR60XL solid rear axle, WB XL CVJ rear      
            driveshaft with captured cross pin design-no set screws to lose    
          Brushless Motor: Castle Creations 2200kV, 4-pole                    
          Receiver Box: Waterproof, integrated into bottom of chassis          
          Battery Trays: Two, easily accessible from sides of chassis          
          Radio: Tactic TTX300 2.4GHz FHSS spread spectrum 3-channel pistol    
            grip with steering rate, and steering and throttle end point      
            adjustments                                                        
          Steering Servo: Tactic TSX45 metal gear, high-torque, water resistant
          Electronic Speed Control: Vanguard AE-4 XL 6S/4S LiPo compatible    
            can be programmed manually via Castle Field Programming Card or the
             or through the Castle Link software interface (optional)          
          Shocks: Oil-filled 16mm Big Bore, 20mm aluminum bodies, 4mm shafts  
          Transmission: All metal gears, single speed, full ball bearing      
            equipped, optional two-speed transmission component sold separately
          Differentials: CNC cut metal gears                                  
          Steering: Dual shear rack                                            
          Suspension: Front, independent, rear 4-link                          
          Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm)    
            diameter                                                          
          Tires: BF Goodrich Krawler T/A KX 2.9 x 7.25" (74 x 184mm)          
          Body: Trimmed and painted, polycarbonate interior tray with molded  
            driver and passenger figures, dashboard and center console detail  
                                                                              
INCLUDES: RTR Yeti XL Monster Buggy with Radio System, ESC, Motor, Body,      
            4-Way Wrench and Instruction Manual                                
                                                                              
REQUIRES: Batteries: Two 2S or 3S LiPo Packs with Dean's Ultra connector, 25C  
            minimum discharge rating                                          
          Battery Charger: To match selected batteries                        
          AA Batteries: Four for transmitter                                  
          LiPo charge bag, maintenance and trail equipment                    
                                                                              
SPECS:      Vehicle;                                                          
          Length: 25.75" (654mm)                                              
          Width: 16.3" (414mm)                                                
          Height: 11.10" (282mm)                                              
          Wheelbase: 18.5" (470mm)                                            
          Ground Clearance: 2.48" (63mm)                                      
          Weight: 12.75" (5.78kg)                                              
            Body;                                                              
          Length: 23.5" (597mm)                                                
          Width: 9.7" (247mm)                                                  
          Height: 6.8" (173mm)                                                
          Thickness: .040" (1.02mm)                                            
            Battery Tray Dimensions;                                          
          Length: 6.89in(175mm)                                                
          Height: 1.3in (33mm)                                                
          Width: 1.7in (43mm)                                                  
          Battery Tray Size: 175mm(L)x48mm(W)x30mm(H)                          
                                                                              
COMMENTS: For Replacement Ball Bearings use:                                  
            Qty.  Size      Location                  Qty. Bearing Set        
             2  10x16mm   Front Diff                   1    ASCC9832          
             2  10x16mm   Rear Diff                    1    ASCC9832          
             2  15x21mm   Front Uprights               1    DTXC1601          
             2  8x16mm    Front Uprights               1    DTXC1585          
             2  15x21mm   Front Bulkhead               1    DTXC1601          
             2  15x21mm   Rear Bulkhead                1    DTXC1601          
             2  8x16mm    Rear Axle                    1    DTXC1585          
             2  5x11mm    Transmission                 1    DTXC1547          
             2  8x16mm    Transmission                 1    DTXC1585  

Axial Wraith Spawn 1/10 RTR 4WD Electric Rock Crawler

$369.99ITEM: AXID9045

EARN 370 REWARDS POINTS ON THIS ITEM

This is the Axial Wraith ""Spawn"" Ready to Run 4WD Electric Rock Crawler. If you are looking for a trail rig that is packed with performance features, the Axial Wraith Spawn is perfect. This full bodied version Wraith is built to go FAST, while retaining many of the components that made the Wraith a favorite among hardcore crawlers and scale enthusiasts. The virtually bulletproof AR60 OCP axles can take all the punishment you can throw at them, whether blasting through the wide open desert or hammering through the toughest rock trails. The Ripsaw 2.2 tires are wrapped around Method IFD beadlock wheels, providing a set of shoes that will hook up in the dirt, as well as claw their way up the rocks. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready to take you there.

DESIGN PROCESS
For this project, Axial wanted to create a body that had a classic feel with modern styling, similar to the retro designs that are seen in the modern auto industry. To implement this idea, Axial's Design and Marketing teams brainstormed and discussed some of their favorite trucks and SUVs from the late-70s and early-80s. Taking those vehicles into consideration, the Design team then studied the iconic styling cues of these vehicles and began sketching ideas. As a result, they developed those ideas and created a unique retro styled Axial SUV body - the Spawn.

FULL TUBE FRAME COMPOSITE CHASSIS: The Wraith™ Spawn 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials.

REALISTIC SCALE DETAILS: The Wraith™ Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included.

2.2 RIPSAW TIRES™: The Axial 2.2 Ripsaw™ tire offers both a realistic and aggressive tread design for the ultimate scale appearance and performance.

METHOD IFD™ BEADLOCK WHEELS: Officially licensed Method 12 spoke beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. The IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a different look.
• Three piece beadlock design
• Utilizes 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly

WB8 HD WILDBOAR™ DRIVESHAFTS: The WB8 HD front and rear driveshafts features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.

RECEIVER BOX, WATERPROOF: The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover.

DUAL SLIPPER CLUTCH: The dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

AR60 OCP-AXLE™ (OFF-CENTER PUMPKIN DESIGN): True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkage has been removed for as much ground clearance as possible. The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle™ tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws.

4-LINK SUSPENSION: The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.

TUNED, OIL FILLED SHOCKS: Finding the right spring rate can be tough. Axial made it easy for you by including springs with the right balance of high speed and harsh terrain handling.
20T MOTOR: Tear up the terrain, be it flat out desert, rocky roads or crawling! Easy operation: no tuning, no fuel, no loud exhaust noise. Just plug'n'go! Design allows use of optional 550 size motors as well.

AE-5 ESC, WATERPROOF: The Axial AE-5 ESC is 3S LiPo capable yet easily switched “in the field” between LiPO and NiMh battery types with a simple jumper – no more complex procedures.
• Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
• Jumper 2 switches Drag Brake settings.
• Waterproof design with waterproof On/Off switch / standard plug / laser etched heat sink.

3-CHANNEL 2.4GHz RECEIVER: The AR-3 2.4 GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts.

2.4GHz RADIO FOR WORRY-FREE DRIVING: The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers.

WATER RESISTANT, METAL GEAR TACTIC SERVO: The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

PROTECTIVE TRANSMISSION COVER: Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drive train.

Axial SCX10 II 1/10 2000 Jeep Cherokee 4x4 RTR

$369.99ITEM: AXID9047

EARN 410 REWARDS POINTS ON THIS ITEM

The SCX10™ has been the vehicle of choice for scale trail fun! For the past 8 years the SCX10™ has been the staple vehicle platform for scale trail enthusiasts around the world. Axial was one of the first companies to embrace R/C rock crawling and the first to mass produce a scale trail truck. Axial has been watching trends, tirelessly testing, and experimenting to create the next evolution of the SCX10™. The SCX10™ II is the culmination of many years of development, furthering aesthetic realism while maximizing trail performance. The next generation of SCX10™ is here!

TACTIC TTX300 3-CHANNEL SLT RADIO:
Sport-level racers and bashers will appreciate the Tactic TTX300's many popular features, along with its amazing adjustability. It features a programmable 3rd channel making for incredible versatility; it can operate functions such as two-speed shifting, winches and lights, making it ideal for a vast array of opportunities. Need more reasons? There's SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter with push-button ease.

TACTIC 3-CHANNEL 2.4GHz RECEIVER:
The Tactic TR325 2.4GHz receiver uses no crystals and features an internal antenna, so you'll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!

35T BRUSHED MOTOR, WATER RESISTANT:
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan allowing for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug 'n' go!

AE-5 ESC, WATERPROOF:
The Axial AE-5 ESC is 3S LiPo capable yet easily switched “in the field” between LiPO and NiMh battery types with a simple jumper – no more complex procedures.
• Male Star Plug lead - compatible with the most common polarized plug.
• Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
• Jumper 2 switches Drag Brake settings.
• Waterproof design with Star Plug / laser etched heat sink.

METAL GEAR TACTIC SERVO, 151 oz-in, WATER RESISTANT:
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

AR44 HI-PINION AXLES:
• High pinion gears for added ground clearance & better driveshaft angles
• The high pinion design allows increased gear surface contact for increased durability
• Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
• Single piece axle housing for added strength
• 1-piece all-metal locker front and rear
• Small pumpkin for increased clearance and a more realistic, scale look
• Bolt on link mounts
• Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
• Optimized gear ratio – 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs

KINGPIN ANGLE:
• 8 degree kingpin angle
• Improved scrub radius over the AX10 axle

AR44 UNIVERSAL AXLE SET:
• Up to 45 degrees of steering
• Smooth action for an efficient drivetrain
• Compact yet durable design
• Hardened steel construction

AX10™ TRANSMISSION:
• Three gear layout
• Metal motor plate
• 32P gearing
• Heavy duty slipper
• Sealed gear cover

ALL STEEL SUSPENSION LINKS:
• Strong steel links for both suspension and steering.
• Large M4 rod ends for durability.

CHASSIS MOUNTED SERVO (CMS):
• Scale looks with proper suspension geometry
• Anodized aluminum links included w/ M4 rod ends
• Adjustable servo mounting system allows for a wide range of servos to be used
• Properly designed suspension for nearly zero bump steer

WB8 HD WILDBOAR™ DRIVESHAFTS:
• 3-piece driveshaft with strengthened slider-floater tube
• Increased surface at the connection between the ball joints and output shaft tubes
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint
• Captured cross pin design eliminates older set screw design for more durability/easy maintenance
• Adjustable length driveline parts included in box

1.9 BFGOODRICH ALL-TERRAIN T/A® KO2 TIRES - S30
• Officially licensed by BFGoodrich
• 4.65” x 1.65” / 1.9 (118mm x 42.5mm)
• S30 compound

1.9 METHOD MESH WHEELS:
In an industry that's all about the latest and greatest, while taking advantage of styling trends, sometimes the 'less is more' approach is quite refreshing and the mesh wheel offers just that. Clean, simple and METHOD STRONG! These officially licensed METHOD Mesh Wheels are replicated in true form for durability and a clean line look.

ADJUSTABLE BATTERY TRAY:
• Adjustable tray that prevents the battery from coming loose or shifting while driving
• Posts are included to fine tune the fit based on the battery you choose
• Easy access for quicker battery changes
• Can accommodate batteries up to 32x44x147mm (3S 5,000 mAh)

STEEL C-CHANNEL FRAME RAIL CHASSIS:
The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness). Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance. The simplified design makes maintenance and assembly quick and easy. The contoured skid plate significantly reduces hang-ups on terrain. Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments.

ADJUSTABLE WHEELBASE:
• Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer.
• Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately
• 4 link rear
• 12.3” wheelbase

JCR OFFROAD VANGUARD BUMPERS AND XJ ROCK SLIDERS:
• Rear mount has been extended and stiffer plastics chosen to help limit the typical sag seen in plastic bumpers
• Lenses included for light locations on bumpers
• Rear tow hitch included for added scale appearance
• Rock sliders specifically sized to fit the Axial Jeep® Cherokee body and the design allows for adjustable widths

2000 JEEP® CHEROKEE BODY:
Pre-painted body with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel).

RECEIVER BOX, WATERPROOF:
Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

WIRE ROUTING:
Wire routing has been thoroughly thought through to help keep your chassis layout looking clean. In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
• Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo.

DUAL SLIPPER CLUTCH:
• Slipper design uses a pad on each side of the spur gear for added surface contact area
• More precise tuning and holding power
• Strong 32P gear pitch for high torque applications

ADJUSTABLE COILOVER SHOCKS:
• All new shock towers with body mounts built in
• The body mounting system covers a larger range of positions and is a much more solid mount than previous
• No additional spacer needed when mounting shocks

Axial RR10 Bomber 1/10 RTR Rock Racer

$399.99ITEM: AXID9048

EARN 400 REWARDS POINTS ON THIS ITEM

The Axial RR10 Bomber Rock Racer takes advantage of years of experience, enthusiast requests and mountains of inspiration to create the next big thing for rock racers. Visually the RR10 looks like a hybrid of the Wraith and Yeti trucks, but this rig is more than just a plastic tube chassis Wraith update. The RR10 Bomber is a race replica of the full scale Bomber Fabrication rock buggy that dominated King of the Hammers in 2013 and 2015; and adds one more choice to Axial's line of 2.2 rock racing vehicles.
One of the most important, yet unseen features is the front mounted battery tray. This update is the first mod most Wraith owners perform, placing the battery in the front, under the hood - making for easy access with the weight up front for improved performance. This also makes swapping the battery an easy task, and is especially useful for enthusiasts participating in the ultra endurance series at Axialfest! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10 specific transfer case for optimal driveline efficiency. A full set of BFGoodrich BAJA T/A KR2 tires have been included along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels.

Axial provided a variety of shock mounting points for added suspension tuning options and allowing the use of a dual shock setup. For additional rear suspension tuning, a sway bar mount connected to the cage, under the scale fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks look the part, while machined pistons provide smooth movement throughout the range of travel. Standard features include durable front and rear WB8 HD Wildboar driveshafts, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears and a 3-channel radio system. This awesome rig is finished off with realistic scale details that include molded shock reservoirs, a fuel cell, a licensed Bomber Fabrication scale tube chassis, Bomber Fabrication body panels and replica graphics, molded driver figures and three pairs of helmets.

RR10 Bomber Features:
• Compatible with optional 2-speed transmission (AXI31181)
• AR60 OCP-Axle
• Rear output differential cover
• WB8 HD Wildboar Driveshafts, front & rear
• Stronger steering knuckles
• 2.2 Walker Evans Racing Wheels
• Spare tire & mount
• Waterproof receiver box
• Tactic 3-channel 2.4GHz receiver
• 35 turn water resistant brushed motor
• Tactic TTX300 3-channel SLT Radio
• Waterproof AE-5 ESC compatible with 2S & 3S LiPo
• Metal gear water resistant Tactic servo with 151 oz of torque

BFGOODRICH BAJA T/A KR2 TIRES - S30 COMPOUND: BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.

KING ADJUSTABLE ALUMINUM SHOCKS: The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.

FORWARD MOUNTED EASY ACCESS BATTERY TRAY: Remove two body clips to release the front hood for access to the adjustable battery compartment. The compartment features ample room for securing 2S/3S LiPo batteries.

EASY ACCESS TO ELECTRONIC COMPONENTS: All electronics are routed and part of skid plate assembly. Simply drop the skid plate and remove the shocks at the chassis to gain access to the electronic components.

DUAL SHEAR SHOCK MOUNTS: All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.

MULTIPLE SHOCK/LINK POINTS AND SWAY BAR MOUNT: A variety of shock mounting points have been added for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. For additional rear suspension tuning, you'll find a sway bar mount connected to the cage, under the fuel cell. Optional sway bar sold separately (AXI31331).

SCALE DETAILS: Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three pairs of black styrene helmets (motorsport, open skull-face and motocross), scale molded shock reservoirs, fuel cell, and RR10 – licensed Bomber Fabrication scale tube chassis.

FULL TUBE FRAME COMPOSITE CHASSIS: The most realistic high strength composite tube frame chassis. This high strength composite plastic is impact resistant to help protect the RR10 from crash damage.

OPTIMIZED DRIVELINE EFFICIENCY: The YETI style transmission with RR10 specific transfer case bolts directly onto the skid plate allowing for proper driveshaft alignment required with AR60 axles.

Axial Racing 1/10 Yeti SCORE Trophy Truck Brushless RTR

$449.99ITEM: AXID9050

The Yeti Trophy SCORE Truck differs from the previous Yeti versions in the following ways;

The TT has greater rearward weight bias with different spring rates and shock oil tuned for balance and high-speed desert racing

Longer Trailing Arm Independent Rear Suspension
for better handling and more travel

Rear Cage and molded details specific to Yeti TT body

Axial 1/10 SMT10 Grave Digger Monster Jam Truck 4WD RTR

$329.99ITEM: AXID9055

This is the Radio Controlled, Electric Powered, 1/10 scale, Ready to Run Grave Digger Monster Jam Truck from Axial.

19 found, showing page 1 of 2