Armattan Frames

Armattan Parts
 
36 found, showing page 2 of 3

Chameleon 5" Frame Only- Orange

$95.00ITEM: ARM018

The Armattan Chameleon is a lovingly calculated, dedicated freestyle frame developed and produced by Armattan Quads. As a new flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact. Your wallet and batteries will both thank you for that one.

Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single" recording angle (as if that exists). You can fine tune larger or smaller as desired with your standard M3 driver. What could be simpler than that?

The third and final Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Hawkeye, Aomway, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.

Chameleon 5" Frame Only- Silver

$95.00ITEM: ARM019

The Armattan Chameleon is a lovingly calculated, dedicated freestyle frame developed and produced by Armattan Quads. As a new flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact. Your wallet and batteries will both thank you for that one.

Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single" recording angle (as if that exists). You can fine tune larger or smaller as desired with your standard M3 driver. What could be simpler than that?

The third and final Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Hawkeye, Aomway, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.

Chameleon Frame 5" w/ Power Distribution Board +XT60 and Connector Saver- Orange

$102.00ITEM: ARM020

This listing includes a frame and integrated power distribution board (iPDB).

The Armattan Chameleon is a lovingly calculated, dedicated freestyle frame developed and produced by Armattan Quads. As a new flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact. Your wallet and batteries will both thank you for that one.

Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single" recording angle (as if that exists). You can fine tune larger or smaller as desired with your standard M3 driver. What could be simpler than that?

The third and final Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Hawkeye, Aomway, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.

Chameleon Frame 5" w/ Power Distribution Board +XT60 and Connector Saver- Silver

$102.00ITEM: ARM021

This listing includes a frame and integrated power distribution board (iPDB).

The Armattan Chameleon is a lovingly calculated, dedicated freestyle frame developed and produced by Armattan Quads. As a new flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact. Your wallet and batteries will both thank you for that one.

Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single" recording angle (as if that exists). You can fine tune larger or smaller as desired with your standard M3 driver. What could be simpler than that?

The third and final Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Hawkeye, Aomway, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.

Space Cowboys SCX HD Frame Only

$57.50ITEM: ARM029

What's better than ripping along inches above the ground, tearing through gates at high speed?  Doing the same thing in HD.  Whether you race or not, if you're one of the early adopters of the Connex ProSight HD-Vision system then you aren't afraid of trying something new.  This certainly qualifies. Coming from our good friend over at Space Cowboy Drone Design, the SCX HD is ready to take to the skies.  Forget needing to strap a recording camera on this baby, she's got it where it counts.


What is it?

The SCX-HD is another official Space Cowboys modification built off of the classic SCX formula. Why change what works great, eh?  Actually, many small changes have been made by Space Cowboys. While the model looks very similar to the SCX 200, it's actually slightly stretched instead of pure X and the design is very clever as we have come to expect from Patrick of Space Cowboys. For those looking to mount their ESC's on the bottom of the arms, the motor wire protectors haven't gone anywhere. These will once again provide the peace of mind to know that you won't lose an ESC to a prop strike. Lastly, and most importantly, the frame provides an innovative yet guarded method to mount your video transmitter and antenna.  Oh and by the way, it still looks shreakin' good.

SCX 200 5" Frame Only - Red

$70.00ITEM: ARM030

The SCX-200 V2 is a dedicated racing frame with many sleek and intuitive design features that improve on the original version. Notable is the internal, flat VTX mounting configuration. This placement works in conjunction with an anti-rotation plate to create a secure and tight locking, sandwich-type design that protects the SMA connection joint. Another benefit of this approach is that the antenna will not twist or rotate into your props or anything else. The video below shows the solid construction of this approach and also highlights some other nice features like the incorporation of 30mm standoffs and a top plate that allows for the configuration of several popular VTX types.

The top plate is designed so dip switches and LEDís are visible and can be manipulated while the VTX is still in the frame. This feature will certainly be welcomed by those racing in groups. Featuring a max camera tilt of 55 degrees, even the fastest pilots should be accommodated. There are also motor wire protection ports built into the frame for those who prefer to mount their ESCís on the bottom of the frame arms.

SCX 200 5" Frame Only - Blue

$70.00ITEM: ARM031

The SCX-200 V2 is a dedicated racing frame with many sleek and intuitive design features that improve on the original version. Notable is the internal, flat VTX mounting configuration. This placement works in conjunction with an anti-rotation plate to create a secure and tight locking, sandwich-type design that protects the SMA connection joint. Another benefit of this approach is that the antenna will not twist or rotate into your props or anything else. The video below shows the solid construction of this approach and also highlights some other nice features like the incorporation of 30mm standoffs and a top plate that allows for the configuration of several popular VTX types.

The top plate is designed so dip switches and LEDís are visible and can be manipulated while the VTX is still in the frame. This feature will certainly be welcomed by those racing in groups. Featuring a max camera tilt of 55 degrees, even the fastest pilots should be accommodated. There are also motor wire protection ports built into the frame for those who prefer to mount their ESCís on the bottom of the frame arms.

SCX 180 4" Frame Only - Red

$65.00ITEM: ARM032

Insane speed : Nice and small.

The second frame in the Armattan Lite series is here! Continuing to push the envelope in terms of pure race design and function this frame is a worthy successor to the SCX 200. This miniature SCX is set to dominate! Featuring innovative design elements, including in-frame VTX access and SMA joint protection, the stage is set for ripping speed!

A smaller footprint that sacrifices nothing in terms of power, speed, or component availability, the 180 SCX can be flown nearly anywhere! Wherever you fly it, you will be going fast.

SCX 180 4" Frame Only - Blue

$65.00ITEM: ARM033

Insane speed : Nice and small.

The second frame in the Armattan Lite series is here! Continuing to push the envelope in terms of pure race design and function this frame is a worthy successor to the SCX 200. This miniature SCX is set to dominate! Featuring innovative design elements, including in-frame VTX access and SMA joint protection, the stage is set for ripping speed!

A smaller footprint that sacrifices nothing in terms of power, speed, or component availability, the 180 SCX can be flown nearly anywhere! Wherever you fly it, you will be going fast.

SCX 200 5" Red Frame w/iPDB 5v/12v

$78.50ITEM: ARM034

The SCX-200 V2 is a dedicated racing frame with many sleek and intuitive design features that improve on the original version. Notable is the internal, flat VTX mounting configuration. This placement works in conjunction with an anti-rotation plate to create a secure and tight locking, sandwich-type design that protects the SMA connection joint. Another benefit of this approach is that the antenna will not twist or rotate into your props or anything else. The video below shows the solid construction of this approach and also highlights some other nice features like the incorporation of 30mm standoffs and a top plate that allows for the configuration of several popular VTX types.

The top plate is designed so dip switches and LEDís are visible and can be manipulated while the VTX is still in the frame. This feature will certainly be welcomed by those racing in groups. Featuring a max camera tilt of 55 degrees, even the fastest pilots should be accommodated. There are also motor wire protection ports built into the frame for those who prefer to mount their ESCís on the bottom of the frame arms.

This listing includes a frame and integrated power distribution board (iPDB).

SCX 200 5" Blue Frame w/iPDB 5v/12v

$78.50ITEM: ARM035

The SCX-200 V2 is a dedicated racing frame with many sleek and intuitive design features that improve on the original version. Notable is the internal, flat VTX mounting configuration. This placement works in conjunction with an anti-rotation plate to create a secure and tight locking, sandwich-type design that protects the SMA connection joint. Another benefit of this approach is that the antenna will not twist or rotate into your props or anything else. The video below shows the solid construction of this approach and also highlights some other nice features like the incorporation of 30mm standoffs and a top plate that allows for the configuration of several popular VTX types.

The top plate is designed so dip switches and LEDís are visible and can be manipulated while the VTX is still in the frame. This feature will certainly be welcomed by those racing in groups. Featuring a max camera tilt of 55 degrees, even the fastest pilots should be accommodated. There are also motor wire protection ports built into the frame for those who prefer to mount their ESCís on the bottom of the frame arms.

This listing includes a frame and integrated power distribution board (iPDB).

SCX 180 4" Red Frame w/iPDB 5v/12v

$73.50ITEM: ARM036

Insane speed : Nice and small.

The second frame in the Armattan Lite series is here! Continuing to push the envelope in terms of pure race design and function this frame is a worthy successor to the SCX 200. This miniature SCX is set to dominate! Featuring innovative design elements, including in-frame VTX access and SMA joint protection, the stage is set for ripping speed!

A smaller footprint that sacrifices nothing in terms of power, speed, or component availability, the 180 SCX can be flown nearly anywhere! Wherever you fly it, you will be going fast.

This listing includes a frame and integrated power distribution board (iPDB).

SCX 180 4" Blue Frame w/iPDB 5v/12v

$73.50ITEM: ARM037

Insane speed : Nice and small.

The second frame in the Armattan Lite series is here! Continuing to push the envelope in terms of pure race design and function this frame is a worthy successor to the SCX 200. This miniature SCX is set to dominate! Featuring innovative design elements, including in-frame VTX access and SMA joint protection, the stage is set for ripping speed!

A smaller footprint that sacrifices nothing in terms of power, speed, or component availability, the 180 SCX can be flown nearly anywhere! Wherever you fly it, you will be going fast.

This listing includes a frame and integrated power distribution board (iPDB).

Armadillo 5" Frame Only - Red

$85.00ITEM: ARM053

Armattan needed a unique animal to keep reenforcing its own individuality in the quadcopter space. Armattan, wrought from the dream of tough and survivable models, continues to evolve in offering the Armadillo. In a world ruled by frames that are compromises, Armattan brings a design with synergy, not concession. This fully carbon fiber warrantied frame brings together rigidity, esthetic, FPV functionality, modularity, and performance. The Armadillo frame features a hybrid h frame; however the motor to motor distance lands exactly at the center of your FC, supporting X frame performance in a quad that can carry everything with the smallest footprint.

Armadillo 5" Frame Only - Blue

$85.00ITEM: ARM054

Armattan needed a unique animal to keep reenforcing its own individuality in the quadcopter space. Armattan, wrought from the dream of tough and survivable models, continues to evolve in offering the Armadillo. In a world ruled by frames that are compromises, Armattan brings a design with synergy, not concession. This fully carbon fiber warrantied frame brings together rigidity, esthetic, FPV functionality, modularity, and performance. The Armadillo frame features a hybrid h frame; however the motor to motor distance lands exactly at the center of your FC, supporting X frame performance in a quad that can carry everything with the smallest footprint.

36 found, showing page 2 of 3